Question about 2006 Ford Expedition Limited

Open Question

Where is my fuse for my alarm for a ford expedition 2006

My battery went dead and i went to recharged it now i cant turn my alarm off but when i got my jeep i never had my car key alarm so what do i do to turn my alarm off

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 625 Answers

SOURCE: ford fiesta 1994

is it a foctory alarm? or an aftermarket alamr? if it is factoty
just lock and unlock the door with the key, but if not let me know.

Posted on Jun 22, 2008

Ad
rockitman187
  • 2559 Answers

SOURCE: No radio volume (locked after changing battery of 06 Ford Fusion

Has to be unlocked by a dealer.

Posted on Jan 07, 2009

  • 232 Answers

SOURCE: 1995 ford escort, alarm keeps going off and car wont start

The alarm brain should not be the easy to locate if stock. Put everything as it was. The alarm brain, control, module or whatever any one wants to call it is most likely behind and under the radio possibly on the floor but in that area. That is if it is OEM if not then it should have been installed under the instrument cluster. I should be a small box probably held with zip-ties and it should have all the information, manufacturer, model and wire functions on the brain. If you think he found the right thing then have him look for the red wire that connects to it. It should have a 15amp fuse on the cable. If its taken out this will disable the alarm. What ever he found should say Security, Alarm or something like that. Not door control or anything other.

Posted on Jun 21, 2009

  • 94 Answers

SOURCE: ford focus rs alarm trouble

if its a factory alarm you put the key in and quickly turn the key on and of i cant remember if its 8 or 9 times but the horn will chirp then you push the lock and unlock on the fob the locks should respond then turn key off and your done. note that if you have more than one fob you have to press lock and unlock on all of them before you turn the key off and i believe you only have about fifteen seconds to do so if not let me know i will look it up at work

Posted on Sep 14, 2009

john9324
  • 1 Answer

SOURCE: 2004 Ford Focus battery went dead had to replace,now no power to

found out there is a 10 amp fuse on the back of the radio itself,replaced it and all is well

Posted on Sep 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Expedition low oil pressure


check that the battery terminals and posts are shiny clean. have a load test done on the battery to check for dead cell

Nov 27, 2013 | Cars & Trucks

2 Answers

Have a 1996 nissan terrano v6 petrol. The battery went flat and I recharged it. When I put the recharged battery back in the car sounds an alarm and wont start (immobiliser?). The alarm stays on for a...


When the alarm sounds, turn the key to the RUN (NOT START) position, then OFF - do this 10 times rapidly.
Many alarms will turn off and allow the car to start with this method.

Nov 17, 2013 | Nissan Cars & Trucks

1 Answer

I got my keys locked inside my blazer in the switch. After finally getting inside I tryed to start but the battery was dead so after rechargeing the battery and hooking it up the alarm started to going...


Try disconnecting the battery, replacing the fuses you removed, turn the ignition to the run position, and reconnecting the battery. Many times this will turn the alarm off.

Sep 07, 2011 | Chevrolet Blazer Cars & Trucks

1 Answer

The battery went dead. When charging the battery


Disconnect the fuse for the alarm system or unplug horn relay system to change battery if you unplug fuse you will have to reset the alarm, be sure you know how to do this before disconnecting the fuse to the alarm system. Hope this helps.

Feb 23, 2010 | 2004 Infiniti I35

2 Answers

My battery went dead on my expedition. When i


I too ran into this problem when battery was removed and re-installed, the radio would power on but no audio. Called Ford dealership and they said they would have to flash the computer at a fee of $95.00 for it to work again. Fortunately my teen aged son who has been at school learning about today's cars said that in most cases removing the negative battery lead for 10 mins and reconnecting will also reset computer. Sure enough it worked and saved me some big coin.

Dec 25, 2009 | 2006 Ford Expedition

1 Answer

My 2006 ford focus zx4 does not want to start. yesterday my daughter stuck a cd and got it stuck, we took it out but the cd player kept making noise and the car wouldn't crank so I took the fuse out and...


sounds like a dead battery. Does it run while it is hooked to jumper cables and then die when they are disconnected? If so then you could have a dead alternator as well. The battery is primarily used to start the vehicle and then run all the electrical options. The alternators job is to recharge the battery and run the engine.

Aug 05, 2009 | 2006 Ford Focus

3 Answers

1998 Expedition


I dont think I have ever come across your exact problem.
I checked for TSB's regarding your problem, and there were
none.
I would recommend removing the instrument panel (I.P), and
checking the connections.
I would also check the connections at the ignition switch.
It is possible that one of the ignition wires is not being fed when this problem occurs. This could be caused by
a poor/broken connection, Worn ignition switch, or a remote car starter poorly installed or malfunctioning.

The next time this happens, grab a test light and remove panels for access to the wiring harness to the ignition switch. STAY AWAY FROM THE HARNESS FOR THE CLOCKSPRING AND AIRBAG. With the ignition on (in run) check for power at the dark blue wire, black&white wire, and the black&orange wire.
If one does not have power, then test it at the switch. If still no power, then replace the switch. If the wire has no power, but has power at the switch then repair the wire.

Jun 22, 2008 | 1998 Ford Expedition

Not finding what you are looking for?
2006 Ford Expedition Limited Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...