Question about Hyundai Cars & Trucks

Open Question

Windows do not work not the fuse

2005 hyundai getz, master window switch control schematic

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

maklean
  • 1665 Answers

SOURCE: 2001 Hyundai Elantra - All four windows inoperable

1. Remove the switch from the door trim panel. 2. Check for continuity between the terminals. If continuity is not as specified in the table, replace the power window switch. POWER WINDOW MAIN SWITCH caeb1ca.gif 77eecfc.gif WINDOW LOCK SWITCH 66921fc.gif

Posted on Jun 03, 2008

  • 840 Answers

SOURCE: Remove door trim to replace power window switch

you dont have to take the trrim off on this car look at the outline of the switch open from rear and pull forward then you can change the window switch/ Please rate my response thank you very much

Posted on Feb 01, 2009

SOURCE: Fuse problem in hyundai getz

dear friend -the fuses you describe is cluster fuses and has nothing stopping or starting of the engine.they are joint in a yellow holder.i think you might have a short be hind the fuse box,thats wh you keek on blowing that fuse.

Posted on Jul 21, 2009

  • 32 Answers

SOURCE: 2001 elantra master power window switch

at the bottom and top of the switch there are retaining tabs. you can try to pop it out at those points with a flathead screw driver, but it is sometimes easier to just remove the door panel to get it out.

Posted on Aug 13, 2009

  • 834 Answers

SOURCE: Can I view a schematic

Here are two typical GM power window wiring diagrams, one older and the other a newer model power window wiring diagram, but these two diagrams should help you understand the circuit. Let me know if you require any further assistance.


8034cc1.png






4282996.png

Posted on Aug 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Question about Cars & Trucks Have a Hyundai santa fe cm2006,no power to window fuse jump from another live fuse Windows work.is it possible relay and where is it?


Ok. I was not able to find 2006 schematics, but a 2007 schematic(?) shows a relay, controlled by the BCM, in the Instrument Panel Junction Box supplying power to the Window fuses. I would check that first. I am attaching the schematic, I hope it will be legible.



26322183-evkz05rsxn4nsie1lkm0ghrj-2-0.gif

26322183-evkz05rsxn4nsie1lkm0ghrj-2-1.gif

26322183-evkz05rsxn4nsie1lkm0ghrj-2-3.gif

Oct 22, 2016 | Hyundai Cars & Trucks

1 Answer

The windows on my crv wont work


at all stations?
all fuses, in both boxes. (did you read the operators guide to find them,
some cars have a circuit break (thermal) for windows,
and is located in the fuse box.
all this info is at alldata.com
ill look. ill respond , as you are a pro DIY person, can read schematics. if not , its just a guessing game.
IT IS a FUSE, not a breaker. but each motor in door has CB.
UNDER HOOD 40am Fuse #13
then fuse 23 underdash and fuse 8 same.
then the relay.same place.
and the relay is controlled by, master station (drivers)
the driver location doesnt need the relay to work.
the relay feeds power to all other window controls
so the master station is unique.
log in to alldata.com and see the pages on power windows.
here are some tid bits.
battery pull warning

Resetting the power window control unit is required after performing the following procedures: Disconnecting the battery, Removing the No. 6 (7.5 A) and/or the No. 23 (20 A) fuses from the under-dash fuse/relay box or disconnecting the driver's door wire harness.
and
window relearn/reset.
Control Unit Reset
  1. Turn the ignition switch ON (II).
  2. Move the driver's window all the way down by holding the driver's switch firmly down; when the window reaches the bottom, hold the driver's window switch firmly down for 2 seconds.
  3. Move the driver's window all the way up by holding the driver's switch firmly up; when the window reaches the top, hold the driver's window switch firmly up for 2 seconds.
  4. If the window does not work in AUTO, turn the ignition switch OFF and repeat the procedure.
  5. Check the window and power door lock operations

Jan 12, 2014 | 2006 Honda CR-V

2 Answers

I have a Toyota Highlander 2005 Limited. I have two problems on 1. the front right & both rear windows won't resp ond on there own switch but all work from the master switch on the drivers door. Fuses are...


Have you checked each individual door switch
for voltage? If there is voltage and a good ground try jumping the switch with a bypass wire to see if the window responds. It could be a bad master control switch which you can bypass to check to see if its working properly. Drivers door switch module. They are known to be a problem. Hope this helps.

Oct 16, 2013 | Cars & Trucks

1 Answer

2005 chevy equinox windows wont work


check your circuit breakes then your left door master control do you have a window lock safety switch

Aug 29, 2012 | Dodge Stratus Cars & Trucks

1 Answer

My passenger window wont go down and I dont know which fuse to change ? - hyundai getz 2003 1.1


It is a circuit breaker and it operates all the windows. Most likely the motor or switch is bad.

Jun 28, 2011 | Hyundai Accent Cars & Trucks

1 Answer

POWER WINDOW FAILURE


you might have a broken wire usually from the door to the windshield pillar inside a rubber insulation

May 29, 2009 | 2005 Ford Explorer

1 Answer

2001 Hyundai Elantra - All four windows inoperable


1. Remove the switch from the door trim panel. 2. Check for continuity between the terminals. If continuity is not as specified in the table, replace the power window switch. POWER WINDOW MAIN SWITCH caeb1ca.gif 77eecfc.gif WINDOW LOCK SWITCH 66921fc.gif

May 31, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...