Question about 1998 Buick Century
Clunking when stepping on gas
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fan will be under dash on passengers side , Removing glove box might be needed, Gm also uses a blower resister ro control fan speeds. First check your fuse and then check and make sure your getting 12 volts to the terminal at the blower, You could have a blown fuse, a bad switch, or a bad resister , if your getting voltage to blower motor then most likely it will be the motor. These are not to difficult to change. I hope this helps, please be aware I can only guess at what the problem is from my past experience.
Posted on Dec 18, 2008
It could be the fuse, does it go down? If not chk. fuse, if fuse ok, see if you can help it down by pushing down on window wile working switch, and also same wile trying to go up, if it don't work or if its slow chanses are the motor is tired and needs replaced or its lost power like bad switch or broken wire. there is also a chanse it came off the track in witch case the door panel will have to be removed.
Posted on Apr 14, 2009
You're either looking at a short in the wire that goes to the fuel sender, or a bad fuel sender. If it was just a broken wire, it would read empty instead. The fuel sender is a permanent part of the fuel pump, so that has to be replaced as a unit.
Posted on Oct 20, 2009
This is a very common problem. I too have this going on. I found a Edmunds Forum and a poster has a fix, at least for him. Link: http://townhall-talk.edmunds.com/WebX?14@@.ef22120/307#MSG307 and see if this is your problem too. I ordered a new headlight switch. Its an easy replacement too. Remove the left side dash panel, two screws and the 20 pin connector. Hope this helps.
Posted on Feb 22, 2010
Tips for a great answer:
Oct 03, 2015 | 2001 Buick Century
May 04, 2011 | 1998 Buick Century
May 08, 2010 | 1990 Buick Century
Apr 07, 2010 | 1998 Buick Century
Aug 15, 2009 | 1998 Buick Century
Jul 08, 2009 | 1998 Buick Century
Jun 01, 2009 | 1998 Buick Century
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: