Question about 2004 Chevrolet Cavalier

Open Question

2004 chevy cavalier steering column diagram

Need diagram to fix the loose in steering wheel

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

csmock132
  • 4669 Answers

SOURCE: nned steerin column diagram

I don't have a diagram, But I have taken tons of these apart. Is there something I can help with?

Posted on May 04, 2009

  • 2039 Answers

SOURCE: Short in steering column wiring

torque bit 20 to remove the air bag bolt in the back cover stering puller stering puller to push plate phillip screw driver that about it pierre

Posted on Oct 19, 2008

  • 39 Answers

SOURCE: 1991 chevy ck1500 steering column

in order to fix this you will need a steering wheel puller and a press I can't remember the name of it but once you get the wheel off you have to press the ring and then get the lock off and then it is pretty simple you can do it with a flat bar and some sockets bot the proper tools are cheap enough that they are always handy

Posted on Dec 25, 2008

  • 52 Answers

SOURCE: steering column very loose need diagram to see

This problem is very common, your best bet is to go to the nearest junk yard and look for a new column. The amount of work needed to try to get into that u joint isn't worth it and matching up the u joint at your local parts store can be a nightmare. Swapping out the column is a twenty minute job. I grabbed a column from a GMC and just swapped the horn button from my chevy, you'd never know it wasn't orginal.

Posted on Jul 31, 2009

  • 43 Answers

SOURCE: I NEED A DIAGRAM OF A 2000 CHEVY BLAZER STEERING

t002335.gif

Steering column above. Tie rod and linkage below. 2WD not 4x4
t002290.gif Sorry I don't have pic of steering gear.

Posted on Nov 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The steering column is loose in my cavalier 2002, is that a easy fix?


well, most steering columns have a bracket that hooks to dash to keep column from moving. most cars have a bracket with 2 bolts to hold it up. but check to see if the intermediate steering shaft that goes through firewall is ok! you should be able to find the problem. good-day!

Apr 24, 2014 | 2002 Chevrolet Cavalier Coupe

1 Answer

Need diagram steering column 1984 chevy


Two screws located on steering wheel back to remove horn assembly to expose steering wheel locknut to remove and then use steering wheel puller to remove the st wheel and expose switch.

Jan 07, 2014 | Nissan Cars & Trucks

1 Answer

Tilt wheel broken steering floating


General Motor cars will have this problem if you use the steering wheel as leverage to get in and out of the front seat. They use a ratcheting ball and socket to allow the column to tilt. t is held together with 4 screws, like a box. These screws work loose and allow the wheel to feel like it floats. It is a hard job esp. with an air bag to deal with. The steering column has to be almost removed from the car to fix. Removing the steering wheel and all covers down to the floor board / firewall area. The screws have to be re-tightened and loctite or glued in place. A job better suited for a dealer or local shop who can deal with the air bag. Sorry.

Oct 03, 2010 | 2004 Chevrolet Cavalier

1 Answer

The stering will is locked on my chevy cavalier


If it will not unlock with key then I suggest you try wiggling the steering wheel while wiggling the key at same time, otherwise your looking at a whole new steering column.

Apr 01, 2010 | 2002 Chevrolet Cavalier Coupe

2 Answers

Diagram on to change turn signal arm on 1994 chevy cavalier , do u have to pull the sterring wheel


1991-94 Cavalier
See Figure 5
This procedure covers removal and installation of the headlamp, headlamp dimmer switch, turn signal and hazard switches, as well as the cruise control switch.
  1. If equipped, disable the SIR system. For details, please refer to the procedure located in of this repair guide.



0900c1528003bf08.jpg enlarge_icon.gif enlarge_tooltip.gif Fig. Fig. 5: View of the steering column showing the turn signal switch location
  1. If not already done, disconnect the negative battery cable.
  2. Unfasten the horn pad, then remove the steering wheel. For details, please refer to the procedure earlier in this section.

If necessary, using locking pliers with a piece of rubber (such as a spark plug boot) between the jaws to help prevent damage to the tilt lever during removal.
  1. If equipped, remove the tilt lever from the steering column by grasping the lever firmly and twisting counterclockwise, while pulling it from the column.
  2. Remove the upper and lower steering column covers.
  3. Remove the dampener assembly, then unfasten and remove the switch assembly from the vehicle.

To install:
  1. Position and secure the switch assembly.
  2. Install the dampener and the upper and lower steering column covers.
  3. If equipped, attach the tilt lever to the column.
  4. Install the steering wheel, then fasten the horn pad.
  5. If equipped, enable the SIR system, as outlined in of this repair guide.
  6. Connect the negative battery cable.

Nov 15, 2009 | 1994 Chevrolet Cavalier

2 Answers

Steering column very loose need diagram to see where to look for the problem the steering wheel is very wobble from the tilt part up to the wheel itself. need to see if bolts are broken in it or does the...


This problem is very common, your best bet is to go to the nearest junk yard and look for a new column. The amount of work needed to try to get into that u joint isn't worth it and matching up the u joint at your local parts store can be a nightmare. Swapping out the column is a twenty minute job. I grabbed a column from a GMC and just swapped the horn button from my chevy, you'd never know it wasn't orginal.

Jul 06, 2009 | 1991 Chevrolet C1500

Not finding what you are looking for?
2004 Chevrolet Cavalier Logo

Related Topics:

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...