Question about 2001 Mitsubishi Galant

Open Question

My belt broke because of ac/compressor locked up. can I by pass the ac/compressor on my 2001 galant 2.4 (belt) to get my power steering working

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 740 Answers

SOURCE: belt broke

Here is a diagram of the routing of your belts identify your set up and it would guide you. Good luck and thanks for using FIX YA contact if you need more help.http://www.2carpros.com/car_repair_information/tec_info/2001/mitsubishi/montero/2001_mitsubishi_montero_drive_belt_routing_diagram.htm

Posted on Jan 05, 2009

Ad
  • 4 Answers

SOURCE: replacing power steering belt for 98' eclipse rs -

if i remember right those belts are not together cuz your car has two belts on it one that goes from the crank pullel that runs the a/c and alt and then one thats from the crank to the power steering

Posted on Jul 27, 2009

heimlich
  • 1978 Answers

SOURCE: how to change the power

The power steering belt is on the front of the motor and is driven by the crankshaft. Below the steering pump is an adjuster bolt. It moves a pulley underneath the pump. To adjust the belt tension located the nut that tightens the adjuster pulley the the pump bracket . It is on the right side of the bracket , the pulley is on the left facing the back of the car. Loosen the pulley mount nut . You can now turn the adjuster bolt to move the pulley to tighten and loosen the belt for replacement. I recommend replacing the alternator belt at the same time. To do this , Unhook the negative battery cable, loosen the bolt holding block to the slide arm, reach under the alternator and loosen the lower mount bolt, not you can adjust the position of the alternator using the adjuster bolt.

Posted on Oct 02, 2010

cragdon
  • 166 Answers

SOURCE: my ac compressor locked up don't have the money to

yes it is very possible you will have to go to an auto store and find the right size belt ask them if there is a model of that car without the belt if not they can find you the right belt

Posted on Dec 31, 2010

  • 3074 Answers

SOURCE: need a routing diagram for

http://www.2carpros.com/diagrams/mitsubishi/galant/1995

Posted on May 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bypass the air condtioning


Not really. I am not aware of that model being sold without ac.
So there would not be a belt and idler pulley used in place of the compressor.
The easiest way to fix it is to get a used compressor and put it on. You don't have to charge the ac for the pulley to work.

Apr 04, 2013 | 2001 Ford Taurus

1 Answer

Power steering stopped working, battery light came on, car overheated on a 2001 taurus: being told by mechanic that the air conditioner compressor needs to be replaced. Sounded to like the belt needs to...


unforutionatly your mechanic may be right if the ac compressor locked up it will eat the belt and make the other things not work like the water pump ,altanator,power steering.esay to check though remove belt see if you can turn the ac pump by hand.if you mechanic is worth his salt he will even show you this.

Nov 12, 2010 | 2001 Ford Taurus

1 Answer

I have a 2001 Plymouth Neon,the belt for the power steering and air conditioner is not staying on so not woking any of these units.I have checked with some dealers and they are giving 2 different estimates...


this is correct if you are talking about the power steering or ac, the power steering pulley can be replaced with out the pump being replaced, now, if its the ac throwing the belt it depends on if the compressor is frozen or just the pulley is bad, if the compressor is bad then replace the whole unit, to same some money get a used one, if the a/c doesnt work ddo you care? because a used one may have problem but will hold the belt. hope this is helpful.

Sep 14, 2010 | 2001 Plymouth Neon

1 Answer

AC light blinking


the a/c light is blinking because it has picked up slippage in belt or the compressor is not turning -locked up or belt missing

Jul 07, 2010 | 2001 Mitsubishi Galant

3 Answers

My AC unit locked up and broke the fan belt on 87 s10 pickup 4 cilender.Can i just get a belt for one without ac?


no you need a new compresser and the belt your compressor locked up and the truck will NOT run with out it

Dec 30, 2009 | Chevrolet S 10 Cars & Trucks

1 Answer

What size of belt can I use on a ford Windstar 2000 3.8L if i want to bypass the a/c compressor.


You may have a problem finding that info out, but an easy way to do it if you can see and reach it, is to make a mark with chalk on the power steering pulley, as well as crankshaft pulley, then run a string or similar from the mark on power steering pulley, around AC compressor pulley, and down to mark on crankshaft, then measure that distance. Now run same string from power steering pulley mark, directly to crankshaft pulley mark, (by-passing AC pulley), and measure that as well. Subtract by-passed length from, non by-passed, will give you the difference in length. Now when you go to parts store for new belt, they can give you a belt that is that much shorter than original one listed. The actual belt part # usually tells the length in it. Just subtract your difference from original, and ask for that length, same design. Sounds pretty complicated, I know, but it really isn't. You used to be able to just say" give me the one for the same vehicle without AC", but most vehicles have AC now, so it isn't quite that easy anymore. Make sure you take a good look and be sure you have the clearance so belt doesn't hit/rub on AC pulley during operation.

Dec 05, 2009 | 2000 Ford Windstar

1 Answer

Replacing power steering belt for 98' eclipse rs -


if i remember right those belts are not together cuz your car has two belts on it one that goes from the crank pullel that runs the a/c and alt and then one thats from the crank to the power steering

Jul 27, 2009 | 2001 Mitsubishi Eclipse

1 Answer

Replacing main belt on chevy truck 4.8 engine


remove the belt to ac compressor.take your serpentine belt go around crank pulley goes around power steering pump goes around alternator and the tensioner on the far left. the water pump on the out side and the top idler pulley out side. the belt drives them from the out side. then you put your ac compressor belt back on.

Mar 17, 2009 | 2001 Chevrolet Silverado 1500

Not finding what you are looking for?
2001 Mitsubishi Galant Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...