Question about 2010 Chrysler Town and Country

Open Question

4.0 litre town and country serpentine belt installation

Serpentine belt installation

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: 1997 Chrysler Town and country serpentine belt replacement

take your time and make sure the belt grooves are seated in every pulley or u will never get it on, there is a belt run diagram under the hook.

Posted on Apr 29, 2009

  • 72 Answers

SOURCE: Serpentine belt Town & Country

It should show the diagram on the radiator top panel...or up on the hood. If not, go to the library and look it up in a manual.

Posted on May 27, 2009

localwonder
  • 6784 Answers

SOURCE: routing a serpentine belt on a 1998 town and

HI. i have posted the proper diagram to assist you with the replacement procedure below.

2d6d064.jpg

Posted on Sep 12, 2009

wracefans24
  • 1985 Answers

SOURCE: Diagram to install serpentine belt on 1994

if you buy your belt from Autozone the belt routing is on the box

Posted on Jan 20, 2010

  • 14 Answers

SOURCE: how to change serpentine belt

There is a youtube video that shows how to change the serpentine belt/tensioner/idler, but on my 2005, the tensioner looks OEM and doe snot have a squared off end to easily use a wrench to turn.

I think I have a sepentine tool (flat with square 3/8's drive) I can use to turn the tensioner.

Posted on Dec 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt2004 town&country install


Do a Google search with these words to find a belt guide.

"Dayco Serpentine belt diagrams"

Feb 10, 2017 | 2004 Chrysler Town & Country

1 Answer

Can i use a shorter serpentine belt to bypass the ac unit on a chrysler town and country 3.8 engine


you may omit the compressor with a shorter belt of you can find one. just make sure the rest of the pulleys are working especially the water pump and power steering.

May 09, 2014 | 2003 Chrysler Town & Country

1 Answer

How stop the serpentine belt from fallen off the tensioner on a 1993 town & country. Is there a aftermarket pulley wheel for that tensioner to replace the flaw problems.


My 1991 Grand Caravan did that too. It had the 3.3L engine just the the T&C (91-93). The tensioner was the problem, hit a puddle on the right side and you'd feel the power steering go and then right away the engine would start to heat up. I tried making the belt come off, but could never duplicate it, only splashing through puddles of rain or wet slush would do it. I never found a tensioner with shoulders on it, but a new one like the original fixed it.

Feb 09, 2014 | 1993 Chrysler Town & Country

1 Answer

1999 chrysler town and country van keeps shreading serpentine belts.


i believe that the compressor is locking up intermittently and or the clutch has disentigrated the bearings on the compressor i would replace the compressor or get a replacement pulley until you have enough time to afford it

Sep 27, 2012 | 1999 Chrysler Town & Country

1 Answer

How to change serpentine belt on a 2005 chrysler town and country. Is a special wrench needed for the tensioner?


There is a youtube video that shows how to change the serpentine belt/tensioner/idler, but on my 2005, the tensioner looks OEM and doe snot have a squared off end to easily use a wrench to turn.

I think I have a sepentine tool (flat with square 3/8's drive) I can use to turn the tensioner.

Dec 24, 2010 | 2005 Chrysler Town & Country

2 Answers

Diagram to install serpentine belt on 1994 Chrysler Town and Country


if you buy your belt from Autozone the belt routing is on the box

Jan 16, 2010 | 1994 Chrysler Town & Country

1 Answer

Replace serpentine belt 96 town & country, also does the tensioner ever freeze up?


Any bearing mounted pulley can "freeze" if a bearing wears out. The most common result it it can burn up a belt which will break with the engine running. When it snaps it MIGHT damage anything it hits - usually with no bad results. ANY bad pulley (or pulley driven part such as the alternator) needs to be replaced before a new belt is installed or the new belt will be damaged from the friction. To replace the serpentine belt - there should be a belt routing decal on the underside of the hood or on the shroud covering the radiator.

Nov 21, 2009 | 1996 Chrysler Town & Country

1 Answer

Serpentine belt Town & Country


It should show the diagram on the radiator top panel...or up on the hood. If not, go to the library and look it up in a manual.

May 27, 2009 | 2001 Chrysler Town & Country

1 Answer

1997 Chrysler Town and country serpentine belt replacement


take your time and make sure the belt grooves are seated in every pulley or u will never get it on, there is a belt run diagram under the hook.

Apr 29, 2009 | 1997 Chrysler Town & Country

Not finding what you are looking for?
2010 Chrysler Town and Country Logo

Related Topics:

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...