Question about Cars & Trucks

Open Question

MAF sensor location-4.7 -2007 Dodge Ram - Cars & Trucks

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: MAF Sensor 2004 Dodge Stratus

If your car has a MAF (Mass Air Flow) sensor, it would be located in the air delivery tube that runs from the air filter box to the throttle plate assembly on the intake manifold. It will have a wiring connector going to it, also. The MAF does exactly what it is called: It "senses" the volume, or "mass" of the air-flow; thusly it needs to be in the intake air tube. If you do NOT have such a device in the air-tube, you have a MAP sensor, (Manifold Absolute Pressure); this is another way of measuring the same air volume, albeit older technology. You will commonly find this device on the firewall, with a vacuum line running to the intake manifold.

I hope that this sheds some light on your question.

Thanks for choosing FixYa for advice!

Posted on Mar 06, 2009

Ad
motor1258
  • 6674 Answers

SOURCE: Location of O2 Sensors on 1996 Dodge Ram 1500 ?

Follow your exhaust manifold down from engine to exhaust pipes etc, you should see them sticking out, 3"-4" approx.length, with wires coming from them. Some are right on manifold, some further down on exhaust pipes.

Posted on Apr 15, 2009

suterman
  • 158 Answers

SOURCE: I need the location of MAF sensor in a 1998 Dodge

Your vehicle dose not have a maf sensor. They used a map sensor it is on the engine located under the front of the breater where it attaches to the engine.

Posted on Jul 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the Mass Air Flow Sensor located on a 2000 Dodge Stratus?


MAF sensors are located on the air inlet trunk to the throttle body, after the air filter. Located the air filter box and follow the air tube toward the engine. You will find a module in-line with an electrical connector attached. This will be the MAF.

Sep 25, 2017 | 2000 Dodge Stratus

1 Answer

Where is MAF sensor 1989 Dodge Caravan 3.0 ?


I believe this engine uses a MAP sensor instead of a MAF sensor. The Manifold Absolute Pressure sensor is located on the firewall on this vehicle with a vacuum line attached to it.

Feb 23, 2015 | Dodge Cars & Trucks

1 Answer

'02 Dodge Neon... Where is the MAF sensor ?


IF IT HAS ONE ITS LOCATED ON THE LARGE TUBE BETWEEN THE AIR FILTER AND THE THROTTLE BODY. IT WILL HAVEA WIRE HARNESS GOING TO IT.

Feb 22, 2013 | 2002 Dodge Neon

1 Answer

I have a 1998 dodge ram 4x4 with a 5.9, engine has been idleing rough, it idles fine for about 30 seconds then runs rough, almost to stalling, also the gas mileage is like 3 miles to the gallon. i had it...


If the speed sensor code is coming up change it. the sensor went out on my truck and it would die when i was slowing down and hit the clutch to downshift

Jan 26, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

Location of IAT/ MAF Sensor on 1998 5.9 Dodge Ram 4x4 and wire color code


the chip system from Gforce is more then just a resister...it is a programmable chip and resistors and Diodes and more...they have come along way since the first ones they built...

Jul 16, 2012 | 1998 Dodge Ram 1500 4WD

3 Answers

Where is the MAF sencor located on 2000 Galant


in the inlet air pipe from the air filter to the manifold

Dec 02, 2010 | 2000 Mitsubishi Galant

1 Answer

The engine light has come on and remain on since today...there is no noticeable changes in how the vehicle drive but im nervous that it maybe something costly eg sensors etc. (vehicle 2007 Dodge Ram single...


Not still under warranty? Your problem is more than likely the maf sensor.. it's located in the ducting going to the top of the engine. buy a can of crc electrical cleaner from an auto parts store and wash/sprayy rhe sensor clean. do not touch, rub or contact the sensor with any other cleaners han or rags. Let it dry and reinstall everything. You will see the sensor in the ducting. Type MAF sensor in a search box and youcan find some pictures and an explanation of it's design and function. Good Luck-Ned_

Sep 17, 2009 | 2007 Dodge Ram Truck

1 Answer

1999 Dodge Ram 1500 Pickup error code p0171


This code means that system to lean, bank 1.
some of the possible causes to make this code set are
1. intake or exhaust leak,
2. problem with the air system.
3. MAF (Mass Air Flow sensor)VAF sensor (Volume air flow sensor)
4. fuel pressure/pump
5. injector(s)
6. HO2S (Oxygen sensor)

Sep 15, 2009 | 2003 Jaguar Vanden Plas

4 Answers

I need the location of MAF sensor in a 1998 Dodge


Your vehicle dose not have a maf sensor. They used a map sensor it is on the engine located under the front of the breater where it attaches to the engine.

Jul 02, 2009 | 1998 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

739 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14309 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...