Question about Cars & Trucks

Open Question

Need to change brake disc pads 115 CDI Vito 2009 model

Help to replace

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
mattman2112
  • 57 Answers

SOURCE: brake pad change

yes, the process is the same. the ABS sensor isn't physically attached to any of the brake components, so don't sweat it. (please rate my answer)

Posted on Feb 02, 2009

Ad
  • 1 Answer

SOURCE: Brake Pad Sensor

i have replaced both front/ rear pads, and no matter what the dash light will not go off. I have disconnected both front/rear sensors, and light is still on , any suggestions?

Posted on Apr 04, 2009

  • 56 Answers

SOURCE: need to change rear brake pads on mercedes benz

i take youve changed the hand brake shoes in the disc as you say the cable, have you adjusted the shoes through the wheel stud hole.

Posted on Jun 26, 2009

  • 56 Answers

SOURCE: exploded diagram of vito cdi engine, how to find

you wont what do you need one for anyway?

Posted on Jun 27, 2009

  • 66 Answers

SOURCE: change glow plugs on mercedes vito 2.2 cdi

This is a Diesel van -- Glow plugs are not too terribly hard to replace, and as long as you disconnect the battery first when replacing them you shouldn't have a problem (except for maybe some access issues - It is a Van) - So yeah, if you can get to them - go for it - you won't hurt anything (Provided you do not cross thread anything) and you can always stop or put them back if you feel uncomforttable...Best of luck...

Posted on Sep 12, 2009

Testimonial: "thanks im going in"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is it that my left side indicator bulbs not flashing yet bulbs are ok on a vito 115 cdi


Could be bad multifunction switch (selector switch on steering column).

Mar 01, 2016 | Cars & Trucks

2 Answers

Jerking range rover When braking 2009 model


Hi, Try replacing the front brake pads. If the pads become contaminated dirt ,oil or grease they won't work properly.
Before you replace the pads check that the hydraulic oil is not leaking out. Dot 3 or 4. Good luck.

Jul 28, 2015 | Cars & Trucks

1 Answer

2009 Suzuki swift hatchback automatic 40000km and squealing brake noise and engine light is on why?


The two matters are unrelated. The squeaking brakes are because you need new brake pads, if you have new pads... the mechanic failed to use brake shim grease which stops the squeak. In severe cases, the front disc brakes may be scored... scratched deeply and require replacement. If you replace the front disc pads, replace the rear brake shoes as well! The service engine light is timed by your dealer to remind you when to take your car in for a service check. Many models have a sequence of steps that one can find on-line to reset the service indicator light back to re-zero the count.

Mar 12, 2015 | Suzuki Cars & Trucks

1 Answer

Hi plz can u help me with valve timing procedures on a vito 115 CDI


If you had lined everything up on TDC before starting you would be good to go. If not, you need a shop manual, which will give you assembly instructions and proper torque values as well.

Jan 22, 2015 | Cars & Trucks

1 Answer

Where do i find the stop lamp current switch on a 115 cdi vito 639 model


located above the brake pedal under dashboard its a twistlock fitting

Aug 15, 2012 | Mercedes-Benz Vito Cars & Trucks

2 Answers

Replace brake pad light on, how do you reset it?


you need to replace the pad wear sensor when the pad wears down it wears the sensor and the sensor needs to be replace if you look at the sensor you can see the wire on the sensor wears threw

May 19, 2012 | 2009 Audi Q7

2 Answers

Squeeky brakes and tire maitanence light on. I only have 32000 miles on my 2009 murano.


first check your discs and pads to see if pads are worn down or there are any score marks on the disks, also the metal antivibration shims in front of the brake pads for wear and tear.check tyres for wear wrong tyre preasures/unballanced, and steering problems can cause exesive wear on tyres.

Aug 01, 2011 | 2009 Nissan Murano

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...