Question about 2004 Subaru Legacy
How to remove panels and get to the retraction assembly?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: rear struts replacement
It's kinda hard to explain on line but I think you need to remove the rear seat back which you might have to remove the sitting portion to get that out. Once the seat back is out of the way most of the parcel shelves slide foreward. I've done this on some newer BMWs and the plastic on the sides needed to be removed also. If you could post a picture of the whole rear shelf area I could probably help you more.
Posted on Aug 12, 2008
u need to remove small rubber dust cover from back side of brake backing plate. then with a sturdy but small screwdriver,thru this hole, u need to locate auto adjuster plate inside drum, u push small driver against this so it is pushed off the adjuster cam, then with flat screwdriver, or adjusting tool, at same time as u are holding adjuster plate, back off adjuster wheel as far as it will go this is akward to do, but brakes need to be backed off to enable drums to be removed drums wear and develop a lip on edge u should then be able to slide drum off. if still hard tap with a hammer while pulling drum
Posted on Jul 03, 2009
First you remove the small triangular shaped plastic piece that is on top of the door panel by the front of the door by the mirror by simply prying it of. Next behind the door open lever if there is a small plastic cover remove it under it will be a screw. Next your window switch will just pry up and out, disconnect the wiring, under the switch there will be a screw ataching the door panel to the door. Next on the face of the door panel if there is a small cover about the size of a nickle but elongated, remove the cover and remove the screw below it. Next pry the door panel from the bottom untill it "pops" out and grab it and pop the rest of the panel out, lift the panel up off of the window ledge.
Posted on Aug 28, 2009
Tips for a great answer:
Aug 22, 2014 | 2010 Subaru Outback
Mar 14, 2012 | 1997 Subaru Impreza
Nov 15, 2010 | 1995 Subaru Impreza
May 09, 2010 | 1995 Subaru Impreza
Jun 11, 2009 | 1993 Subaru Impreza
Apr 07, 2009 | 1988 Toyota Camry
Mar 29, 2009 | 2004 Subaru Impreza
Mar 19, 2009 | Subaru Outback Cars & Trucks
Oct 12, 2008 | 1996 Subaru Impreza
Nov 18, 2013 | 2004 Subaru Legacy
532 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: