The starter was replaced, the fuel pump, relays, and fuzes are all good, what else havent i checked, please help
SOURCE: 2000 izuzu rodeo
Wires on the wiring harness need to be replaced. The dealer will want you to get the work done for $1200.
SOURCE: 2000 rodeo will not crank
Sounds like the relay isn't receiving it's signal power to close and activate the main power to the fuel pump. Test to make sure it's getting the power when you first turn on the key [ The PCM will turn it off after a few seconds if it dosen't sense a imput from the Crank Sensor that the engine is running ]. If there's no power there, first look for a blown fuse and make sure there's power to the fuse, if not then you will have to test back thru the circuit to find the cause [ also check the igntion switch].
376 views
Usually answered in minutes!
×