Question about 1995 Buick LeSabre

2 Answers

Lhow do i replace icense plate light bulb

How do i best remove the light bulb? I have tried pushing and turning, and pulling, but can't seem to replace burnt out bulb.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have seen a similar question regarding the license plate light which someone else said to push in and turn, but I find the screws keep turning and don't loosen, anyone else find this?

Posted on Mar 13, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 53 Answers

Sometimes you got to be mean to it. The method for removal is to push in and then turn.

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change headlight lamp drivers side


On the back, engine side of the headlights there is a rectangular plate which allows access to the bulbs (lamps) to remove this there are locking bars, pry these, up and down away from the plate, remove plate.
The headlamp bulb is the larger one and is retained with a spider clip, above the bulb pinch the spider clip and push slightly forward while opening the pinch. The bulb should now be loose with a wiring block attached.
Slide the bulb out of the recess, remove the wiring harness by pulling the block away from the bulb.
You can now replace bulb, which should have a protective sleeve of foam or card protecting the glass, do not touch the glass of the bulb, touching the glass will cause the bulb to blow when it gets hot.
To replace bulb, push spider clip away from recess, while holding the metal part of the bulb remove sleeve and insert bulb into recess, turn the bulb to ensure it has seated flat into recess, refit spider clip over bulb pushing forwards then pinching, refit wiring harness.
Check the lights to ensure bulb is working.
Replace rectangular plate & clip locking bars back into place. How To Install Replace Change Halogen Headlight and Bulb 2005 07 Ford Focus

Nov 18, 2015 | 2003 Ford Focus

2 Answers

Replace license plate lights


Hi there,

Firstly, remove the four screws on the bottom of the license plate light assembly using a Phillips screwdriver. Then pull the license plate light cover out away from the rear of the car. Pull the bulb forward and pull it straight out of the wiring socket.

A press the new bulb into place until it is secure. Push the bulb and wiring assembly back up inside the light assembly and replace the license plate light cover. Replace the four screws that secure the light cover and tighten them with a Phillips screwdriver. Finally, turn on the lights to test the new bulb.

Hope this helps...

Jan 17, 2011 | 2007 Toyota Sienna

1 Answer

How to replace license plate light on a 2002 buick lesabre


Hi. Remove the retaining screws from the license plate light assembly with a Phillips screwdriver. There are two screws on each side of the lens assembly.

Pull the light assembly cover down out of the way to gain access to the bulbs. Twist the bulb socket counterclockwise to remove it from the assembly and pull it straight out. Pull the bulb out of the socket.

Push the new bulb straight into the socket. Replace the bulb and socket inside the light assembly and turn it clockwise to secure it.

Replace the assembly cover and secure it with the retaining screws. Tighten the screws with a Phillips screwdriver. Turn on the lights to test your new bulbs.
Take care

Aug 04, 2010 | 2002 Buick LeSabre

2 Answers

Replacing licence plate light


just twist and spap it from the back side of the plate light

Jan 12, 2010 | 2005 Honda Odyssey

1 Answer

How do i replace the license plate lights on my 1990 honda accord. i can't get the bulb out of the socket


You should have two license plate lights, right above the license plate. If you remove the two screws that hold the one you want to change in, the entire fixture will drop down(best to do this with the trunk open). Remove the metal clip plate that covers the bulb. The bulb SHOULD simply pull directly out.
Hope this helps you.

Oct 21, 2009 | 1990 Honda Accord

2 Answers

How do you replace the tail light in a 2003 Ford Focus ZTS sedan? not a hatchback


Open up hatch , reach in and pull back liner, Remove nuts to release light lens. then push, turn and pull out bulb socket and same for bulb.

Sep 23, 2009 | 2003 Ford Focus

1 Answer

Mazda6 Number Plate Bulb - how to remove?


Most bulbs like tail, stop, and blinkers you have to push in and turn (I believe counterclockwise) until it stops and pull it out. On the base of the bulb it has little pins that fit into a groove for alignment and securment, then at the bottom of the socket it will have a spring to ensure contact with the bulb. When you put a bulb in, the pins go into the groove, push a little to make contact and turn clockwise to set the pins. Removing the bulb should be in the reverse order.
Hope this helps.

Mar 08, 2009 | 2003 Mazda Mazda6

2 Answers

License plate light


If you place the flate blade of a screwdriver to the right side of the light(s) housing. And push gently to the left the catch will release and the unit will drop out of the trunk lid. Twist the bulb 1/4 turn and remove. Just reverse the process to complete.
Open the trunk to eye level to see to make it easier to see. Applies to all 02-05 Devilles

Jan 03, 2009 | 2000 Cadillac DeVille

1 Answer

License Plate lamp burned out.


you'll see the lights plugged in under rear bmper. grasp the light plug,twist counter clkwise 1/4 turn, pull out plug, pull bulb strait out, push new bulb back in.

Nov 11, 2008 | 1998 GMC Suburban

2 Answers

License plate bulb replacement


you have to carefully pry the bulb holder out and remove the bulb by turning it counterclockwise while pushing in. Replace the new lightbulb the reverse mode.

Oct 09, 2008 | 2000 Lincoln LS

Not finding what you are looking for?
1995 Buick LeSabre Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...