Question about Cars & Trucks

Open Question

Spark plug gap for 2002 eclipse. 2.4 engine. 16 valve.

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 701 Answers

SOURCE: what is the proper spark plug gap setting for a 2002 Kia Rio

Hello mfriesner71; my name is Roger and I will answer for you. The correct plug gap is 0.027 to 0.031.in. Any gap between these will work fine. Just make sure they all gap the same. Should you need further help please just ask. Please rate the answer. This way I know it was helpful. Thank You for using Fix Ya. Roger

Posted on Apr 30, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NGK spark plug gap setting


same as factory plugs call parts store they can tell u the exact gap

Feb 24, 2014 | 1996 Toyota Carina

1 Answer

Spark plug gap for fiat pounto 2001 bosch fr d


Check all these are NGK as used by Ffiat

PUNTO 1 (94-->10/99) 1.2 176A7/A8/B1/B4.000 / 8 VALVE 60-75bhp 03/94 -> 10/99 BCPR6E 1269 0.9mm


PUNTO 1 (94-->10/99) 1.2 176B9.000 / 16 VALVE 97 -> 10/99 DCPR8E 4179 0.9mm

PUNTO 2 (10/99-->06/03) 1.2 188A4.000 / 8 VALVE 60bhp 10/99 -> 06/03 BKR5EZ 7642 0.8mm


PUNTO 2 (10/99-->06/03) 1.2 188A5.000 / 16 VALVE 85bhp 10/99 -> 06/03 DCPR8E-N 5692 0.9mm


FIAT PUNTO 3 (07/03-->12/05) SPARK PLUGS 1.4 16v DCPR7E-N-10



Check HERE some accross reference.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Sep 03, 2012 | Buick LeSabre Cars & Trucks

3 Answers

Im thinking of trying to change all the spark plugs and leads myself.would i need to get a new casket for the cover?also,is there any other things i should watch out for ?


as for the valve cover gaskets, if no oil leaks there ok. as for the plug wires, when replacing. do one wire at a time as not to get them on the wrong cylinders. dont forget to make sure gap is right on plugs before putting them in. good-day !

Aug 25, 2011 | 1997 Mitsubishi Diamante

1 Answer

What is the correct spark plug gap for 1990 VW Jetta GLi (2.0L, 16 valve, 4 cylinder)?


The proper spark plug gap for a 2.0L is .7 to.9 mm or .28 to .35 inchs. If you are using multiple electrode plugs, gap is not adjustable. Also when you put your new plugs back in the book calls for 15 ft.lbs. of torque, so don't tighten them too hard ( aluminum strips easy). Hope this helps.

Dec 11, 2010 | Volkswagen GLI Cars & Trucks

2 Answers

How to change spark plug where are they located at


Your spark plugs can be located in 2 different locations.
1 if your engine is sitting front to back of the vehicle your plugs will be located on the drivers side and the passengers side of the vehicle.
2 if your engine is set from one wheel well to the other than your spark plugs will be located on the front of the engine ( front towards the bumper/grill.) and next to the firewall.

4.6L, 5.4L & 6.8L Engines
  1. Disconnect the negative battery cable.
  2. Remove the coil on plugs as outlined under Ignition Coil in this section.

  3. Remove the spark plugs.
  4. Inspect the spark plugs
  5. Adjust the spark plug gap as necessary. Proper gap is 0.52–0.56 in. (1.32–1.42mm).

installation.
  1. Install the spark plugs and tighten them to 13 ft. lbs. (18 Nm) for 4.6L and 5.4L SOHC engines. For 5.4L DOHC and 6.8L engines, tighten the spark plugs to 15 ft. lbs. (20 Nm).
  2. Install the coil on plugs.
  3. Connect the negative battery cable.

Jan 09, 2010 | 2002 Ford Expedition

2 Answers

How do I change my spark plugs on my 2002 toyota tacoma


On the V6 engine The drivers side plugs are easy although the passenger side will require you to remove the intake boot and the coil packs, easily done with a 10 mm socket and ratchet. Disconect the coil pack connectors by depressing the plastic clip and pulling them off one by one on the three coil packs . leave the plug wires attached and pull the coil pack straight up and off the spark plug.Blow out the area around the plug with compressed air to prevent debris from entering engine when the plugs are removed. Use a 5/8 spark plug socket and a 8 inch extension bar on your 3/8 ratchet at remove the plugs. use anti seize on the new plugs, gap the plugs to manufacturer specs and install your new plugs 2. If its a 4 cyl engine its actually a bit more difficult. The intake boot assembly has a bracket that bolts to the valve cover and side of the engine and you must remove it to access the 4 coil packs on top of the engine. once again the coil pack wires must be disconected and the coil packs un bolted and removed from the valve cover to access the plugs. Blow all dirt from around plug with compressed air to prevent foreign objects or dirt from entering the engine when you remove the spark plug , once again use a 3/8 ratchet and an extension with your 5/8 spark plug socket and remove plugs, use a small amount of anti seize compound on the threads of the nes plugs and gap them to manufacturer specs before installation. Also while the coil packs are off,, Inspect them for ARC Tracing a white residue and line may form on the coil pack Tip/boot if you see alot of ARC tracing Id suggest replacing that coil pack. Especially if you have a misfire condition.

Aug 20, 2009 | 2002 Toyota Tacoma

1 Answer

Where are the spark plugs located on a 2003 Mits. eclipse 4cyl gs


the spark plugs are in the top of the engine going thru the valve cover into the cylinder head. you might have a plastic cover that is over top of the valve cover which is covering up the spark plugs. they are very easy to change out.

Aug 10, 2009 | 2003 Mitsubishi Eclipse Coupe

1 Answer

Do not know where spark plugs are located in motor


the spark plugs wires are directly located on top of the engine and the spark plugs are down inside the holes in the valve cover itself. I believe there are also 2 coils on top of the engine, which hide two of the spark plug wires which are attached directly to the underside of each coil, remove the coil pull it upward carefully and you will find the spark plugs for those two in the hole underneath the coil for each one. If you decide to replace the plugs, make sure to check the spark plug gap even if they tell you they are pre-gapped as pre-gapped spark plugs are usually gapped for more than one particular car and it may be incorrectly gapped for your specific vehicle. If you decide to also replace the spark plug wires, you will have to purchase the spark plug wires for the underside of each coil seperately because most local auto parts stores only sell 2 spark plug wires in the set that go onto the non-coil attached wires and plugs, and you have to purchase the coil spark plug wires seperately. So all in all you should have 4 spark plug wires, 2 that attach directly underneath the 2 coils, then 2 regular type wires that run to the other spark plugs. If you look at the valve cover and see the wires, you will see what i am saying better. Just don't forget to ask the autoparts store the spark plug gap recommended for you car, and adjust the gap on the plugs as needed. good luck.
Bren H.

Sep 19, 2008 | 2000 Mitsubishi Mirage

1 Answer

96 eclipse need more info..


This sounds like the timing belt is shot. Remove the distributor cap, have your helper crank the engine. Is the rotor turning?? If not, then it is the timing belt. Some engines are rather forgiving when the belt breaks, some will get bent valves. Frankster016

Aug 30, 2008 | 1996 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...