Question about 2006 Jeep Liberty Renegade

Open Question

Key for my 2006 jeep liberty not locking/unlocking doors

I have one of those all in one keys and unlocks the doors, disarms the alarm system and will pop open the back cargo window and the key is no longer working. I have replaced the battery and still nothing. If I try to lock the doors manually and unlock them with the key it sets the alarm off and then I have the horn honking and unable to stop that. Amy suggestions as to what the issue could be?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: can't unlock doors without alarm going off

If you lock the car from the outside with the key your alarm will not go off this happened to me too

good luck with buying a new keypad they're over 150 each

Posted on Feb 20, 2009

  • 1 Answer

SOURCE: 2002 Jeep Liberty, rear window latch is ''locked'' & window is open

rear door of my 2002 liberty will not unlock . I do not have power locks $

Posted on May 05, 2009

  • 1 Answer

SOURCE: alarm wont disarm and unlocking doors does not work any suggestions?

I just had the same problem with my 1995.. believe me its a pain! by the way on the driver side below the steering wheel close to the door there should be a hidden pink (or any color) plastic box which basically controlls the cars security system... i removed it and i was good to go...try that... the only thing though is that you wont be able to lock the doors automaticaly, ull have to do it manually

Posted on May 22, 2009

  • 691 Answers

SOURCE: Can not disarm alarm on 2002 jeep grand cherokee

First, try to re-programme the RKE (Remote Keyless Entry) transmitters before searching for anything else. Assure that the batteries in the transmitters are in working condition and replace them if you are not sure. To pro-gramme the transmitters, perform the following:

Open the driver's door and let it be open throughout the programming process. Then, shift the mechanical door lock lever to the LOCK mode, turn the ignition key to the rUN mode. Within a period of twenty seconds, point a transmitter at the receiver dome and push the lock button for a period of five seconds at least. After the receiver has accepted the programming code the driver's door will unlock on its own. The first transmitter has been programmed, in the same extra transmitters up to four may be programmed in the same way, within twenty seconds.
If the alarm does not work properly, you may have a faulty alarm module and may have to be replace and its common problems with and older model. the systems work like a security systems, if you arms your system with the remote you have to disarm it also with the remote in order for the engine to start and run. The logic in the PCM prevents the VTSS engine no-run feature from arming until the engine start; Its one of the security systems jeep has and if you ask for my opinion its junk. hope that help some..

Posted on Jul 26, 2009

dttech
  • 4803 Answers

SOURCE: My 2005 Jeep Liberty 3.7

If the radio stays on and goes off as soon as you open the door, this is normal operation. Yes, this one threw me for a loop the first time I saw it also.

As for the lights blinking and horn honking, I would have to do some research to see what normal operation is. Many chrysler products do not have this built into their power lock systems. It depends on the security features of your particular vehicle.

Posted on Dec 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off the alarm on my 2002 jeep wrangler tj?


is this just alarm , and or the immoblizer SKIM problems, why not post the symptoms, or if opr guide missing.
all answers USA spec cars......
all answers STOCK cars, not hacked or with non Jeep parts.

the SKIM can not be defeated.
if still stock is it? with stock alarm. is it?

the fsm is free for 02 TJ
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

it explains all there. (no chapter on alarm only the IMMO )
chapter 8Q
theft and security chapter.
I attempt to guess your question, how to disable just the door alarms. (not SKIM)

my 02 TJ has no such thing, door alarms at all , mine had rag windows
and and no electric door locks at all, just a key. (mech lock)
not only that, the 02 operators guide has not a word at all about any alarm. period (USA cars)

my 08 JK however has doors with glass windows and all trimmings.
the alarm on my 08 is disabled by these steps.

To Disarm the System
To disarm the system, you will need to press the UNLOCK
button on the RKE transmitter, or turn the ignition
key to the ON position. If something has triggered the
system in your absence, the horn will sound three times
when you unlock the doors. Check the vehicle for tampering.
The Security Alarm System is designed to protect your
vehicle; however, you can create conditions where the
system will arm unexpectedly. If you remain in the
vehicle and lock the doors with the RKE transmitter, once
the system is armed (after 16 seconds), when you pull the
door handle to exit, the alarm will sound. If this occurs,
press the UNLOCK button on the RKE transmitter to
disarm the system. You may also accidentally disarm the
system by unlocking the driver's door with the key and
then locking it. The door will be locked but the Security
Alarm will not arm.


next time post symptoms, so we can be on the same page..

Mar 08, 2015 | Jeep Cars & Trucks

1 Answer

Start Kia sportage with no alarm button


Usually if you use the key in the door lock to lock unlock the door it will disarm the security system on the car, when you unlock the door it has to be the drivers door, lock the door then unlock the door and hold the key in the unlock position for 2 seconds

Dec 09, 2013 | 1998 Kia Sportage

1 Answer

Jeep liberty clickers both will not work to lock and unlock doors and alarm


is it a factory alarm or after market . both have relays and fuse to them

Nov 05, 2012 | 2006 Jeep Liberty

2 Answers

1996 jeep grand cherokee laredo: I had just bought this jeep from an owner and i locked the doors yesterday. When i went to unlock the door it set off the alarm. I have tried everything possible to...


put the key in the drivers door lock it with the key still in the lock unlock it and then pull the key out do this three times that is the factory built in security programing shut off system for jeeps and chrysler

Mar 11, 2011 | 1996 Jeep Grand Cherokee

1 Answer

I just bought a 1996 jeep grand cherokee larado, I locked the doo while inside with electric lock switch on door. I then opened the door with the handle. the alarm went off which I did not know it had. I...


lock with key,electric door lock button,or remote and alarm will set. to disarm you have to use the key or remote to open it.the reason it woulnt disarm from drivers door is either the door lock cylinder switch is broken or the wire to it in the rubber boot that connects the door and the body is broken.
the remotes are cheap and programing is easy,procedure in owners manuel something like lock drive door with elkect. lock switch with door open then push and hold unlock untill doors unlock then turn key off.you may have to fix that drive door lock cyl.switch first though mabee not dont know for sure

Mar 22, 2010 | 1996 Jeep Grand Cherokee

2 Answers

How doyou disarm the factory alarm system in a 1994 jeep grand cherokee my alarm system keeps shutting down the whole car it is a real pain to get it started again i just want to totally shut the alarm...


The security alarm system on the 1994 Jeep Cherokee arms itself on any normal exit from the vehicle, i.e. ignition off, open door, lock door with power door locks, close door. If the doors are locked with the key, it does not arm.
If the battery is disconnected, then reconnected, the alarm system will go into powerup alarm mode. The lights will flash, but the horn will not blow.
The alarms can be disarmed by a keyless vehicle remote or by unlocking either of the front doors or the read lift gate with the key. If the key method does not work with any of those three entrances, there is a problem either with the input to the alarm module or the module itself.
There is a switch in both front doors and the tailgate which is activated by manualy unlocking those doors. The alarms can be disabled by permanently grounding the wire going from either of those switches to the alarm module, but this will remove all theft protection.
The best thing to do is to find out why the system is going off in the first place. It could just be a glitch, a loose connection that can be fixed fairly easily and keep your theft protection intact.

Glenn

Feb 23, 2010 | 1994 Jeep Grand Cherokee

2 Answers

How do i reset my alarm on a 97 jeep Grand


Here is excerpt from the 1998 Jeep Grand Cherokee Service Manual ... i know you posted under 1997 JGC but this information may be helpful ... by "reset alarm" i believe you meant disarming the alarm?

Arming
Passive arming of the Vehicle Theft Security System (VTSS) occurs when the vehicle is exited with the key removed from the ignition switch, the headlamps are turned off, and the doors are locked using power lock switch. The power lock switch will not function if the key is in the ignition switch or the headlamps are on with the driver’s door open. The VTSS will not arm if either front door or the liftgate are locked using the key in the lock cylinder.
Active arming of the VTSS occurs when the Remote Keyless Entry (RKE) transmitter is used to lock the vehicle, even if the doors and/or the liftgate are open when the RKE transmitter Lock button is depressed. However, the VTSS arming will not be complete until all the doors and the liftgate are closed.
Following successful passive or active VTSS arming, the VTSS set lamp on the top of the instrument panel will flash rapidly for about 15 seconds after the illuminated entry system times out. This indicates that the VTSS arming is in progress. If the light stays on steadily during the arming, it indicates that the hood switch is closed (the hood is open). The VTSS will still arm if the hood is open, but the engine compartment will not be protected. Once the 15 second arming function is complete, the set lamp will flash at a slower rate to indicate that the VTSS is armed. Disarming Passive disarming of the Vehicle Theft Security Sytem (VTSS) occurs when the vehicle is unlocked using the key to unlock either front door or the liftgate. Active disarming of the VTSS occurs when the vehicle is unlocked by depressing the Unlock button of the Remote Keyless Entry (RKE) transmitter. Once the alarm has been activated (horn sounding, exterior lights flashing, and the the engine no-run feature), either disarming method will also deactivate the alarm. Depressing the Panic button on the RKE transmitter will also disarm the VTSS, but the horm will sound and teh exterior lamps will flash for about three minutes as a part of the Panic feature function. ..." And as an additional note, if you have the courtesy interior lights set at 30 seconds like i do, you have to wait until lights go out (with alarm still sounding) before you can disarm the alarm via passive disarm method... what a pain when you don't have the actual RKE handy... Good Luck!

Feb 14, 2010 | 1997 Jeep Grand Cherokee

1 Answer

2000 Jeep Grand Cherokee Alarm


close all doors and hoods and lock and unlock pasenger dors with key
marko

Sep 14, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Can't unlock doors without alarm going off


you can not prevent the alarm from going off because there is no disarm switch in the door lock mechanism. the only actual solution is to replace the key

Jan 03, 2009 | 2005 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Jeep Liberty Renegade Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...