Question about 1999 Pontiac Grand Prix

Open Question

How to remove wiper arm 99 grand prix

How to remove wiper arm

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 31 Answers

SOURCE: power steering fluid on grand prix

You should add it to the power steering pump reservoir, which if you have the 3800 series II its behind the engine on the passenger side.

Posted on Oct 20, 2008

  • 5 Answers

SOURCE: srs airbag light is on on my 99 pontiac grand prix

If the seat belt light comes on intermittently with the belt buckled, it may have a bad switch in the buckle or a loose connection @ the switch. This may also set a diagnostic trouble code in the srs control module & keep the srs airbag light on.

Posted on Mar 27, 2009

ftw1952
  • 10319 Answers

SOURCE: 2004 grand prix driver side wind shield wiper

The arm is stripped onto the stud its pressed into which is call a wiper transmission. That part mounts to eack ww blade then to the wiper motor. You need a new transmission and maybe a new wiper are as well

Posted on Jan 20, 2010

  • 97 Answers

SOURCE: 2001 pontiac grand prix- wiper blades stop in

needs wiper module. check bushings around wiper motor at the firewall.

Posted on Mar 13, 2010

  • 78 Answers

SOURCE: How to remove wiper arm on 2003 Pontiac grand am

The installation process is simple and requires pushing down a tab on the wiper mount and rotating the wiper blade so you can pull the wiper out of the hook on the arm. Then you simply snap the new wiper blade on. The replacement wiper blades will come with step-by-step, illustrated instructions and once you have the instructions and the wiper blades/arms in your hands and in front of you, it will all make better sense and will an easy maintenance task. Very simple and takes 5-15 minutes usually not requiring any tools.
Read more: http://wiki.answers.com/Q/How_do_you_change_wiper_blades_on_2003_Pontiac_Sunfire#ixzz1CvQBvj3W

That's for a pontiac sunfire of the same year, can't imagine that it's any different from a different model of the same make and year!

Posted on Feb 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing windshield wiper arm from a 2000 Grand Prix


Sometimes you have to use a small gear puller. The arm could be tapered and is wedged onto the shaft.

Dec 05, 2012 | 2000 Pontiac Grand Prix

2 Answers

Windshield wiper one stop moving on my 97 grand prix


Hello, you'll will need to remove wiper motor crouling to get the wiper motor. There will be two rods attached to the wiper motor. Now, this arms operate the wipers on your auto wind shield.
One of the arms have came loose from it ball joint. GB....stewbison

Sep 24, 2011 | 2002 Pontiac Grand Prix

1 Answer

1998 Grand Prix Windshield wiper problem passenger side wiper acts erractically


I assume that the drivers side is working perfectly and only the passanger side has a shorteded erattic sweep . It will be either a loose locking nut on the wiper arm (on spindle) or unusually a faulty crank arm (weld) on the underside of the wiper spindle . Good luck

Apr 05, 2010 | 2002 Pontiac Grand Prix

1 Answer

Windshield wipers are out of time, stop in up


hi you can try, removing both wiper arms then turning wipers on ( without arms connected ) then turn them off, once set as normal refit the the arms in correct position then you should be sorted...hope this helps please vote thanks

Mar 03, 2010 | 2002 Pontiac Grand Prix

1 Answer

Wiper blade arm is not working. I turned the wiper blades on while there was ice on the windshield. I may have striped the arm.


Yes, you probably stripped them. : ( Remove one of them and try your wipers again. If the shaft is still turning inspect the wiper arm mounting...its probably smooth. Generally the arm mounting is made of a softer metal than the wiper shaft, so all you need to do is wire brush the wiper shafts to remove any material in the serations and install new wiper arm assemblies.

Feb 08, 2010 | 2001 Pontiac Grand Prix

1 Answer

01 Grand Prix. Driver's wiper barely moves, then


The wiper arms are mounted to "splined" shafts. Either the arm or shaft may be stripped. You need to remove the arm and inspect them.

Feb 07, 2010 | 1997 Pontiac Grand Prix

1 Answer

2004 grand prix driver side wind shield wiper going past windshield and now is not in sync with other wiper arm,and still moves past windshield and jams up.


The arm is stripped onto the stud its pressed into which is call a wiper transmission. That part mounts to eack ww blade then to the wiper motor. You need a new transmission and maybe a new wiper are as well

Jan 20, 2010 | 2004 Pontiac Grand Prix

1 Answer

We have a 2002 pontiac grand prix gt with wet snow the windshield wipers came apart at the base (under cowling) got it fixed they work now but the driverside stops at 3/4 swipe then goes down. passanger...


While the wipers are in the parked state, just loosen off (or remove) the wiper arm from the drive spigot and re-position the driverside wiper arm to the correct position.
Re-tighten arm drive mount and all should be well.

Oct 08, 2009 | 2002 Pontiac Grand Prix

1 Answer

I have a 1997 Grand Prix GTP and my windshield wipers won't work


The wiper arms are a "friction fit" on the wiper linkage studs.
Remove the cap from the end of each wiper arm, remove the retaining nut, carefully pry the wiper arm off of the stud. Clean out the inside of the arm hole and also clean up the stud. Position the arm back in to proper place on the wiper arm "park" stands and the linkage stud. Put the nut back on the stud and tighten down.
This should solve your problem.

Jun 25, 2009 | 1997 Pontiac Grand Prix

2 Answers

I took my 2002 pontiac grand prix in to a garage this morning and was told my winshield wiper motor is the problem, my nephew thinks he can fix it, he just wants to know if it is on top of my car or is it...


The wiper motor is located under the plastic air intake at the base of the windshield on the driver's side of the vehicle. It is not too hard to get at and you will need to remove at least the lh wiper arm. It is very possible it is a linkage problem and not the motor (the arms pop off their sockets sometimes on these cars) Take the plastic cover off and you will see the arms and be able to tell if they are disconnected or not.

Dec 03, 2008 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
1999 Pontiac Grand Prix Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...