Question about Cars & Trucks

Open Question

2007 npr 300 clutch adjustment ?

Very stiff in 3 & 5th gear New Gear box oil

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnthejag
  • 286 Answers

SOURCE: Clutch Sometimes Slipping in 4th and 5th gears!

Hi Jackiaria

Unfortunately you have a hydraulic clutch, which is self adjusting on your car.

The problem you are experiencing is the excessive wear to your clutch, or oil contamination on the clutch plate.

Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected.
There is also a possibility of excessive wear, or scoring, on the flywheel surface, the longer you drive the vehicle with a slipping clutch, possibly requiring the flywheel to be skimmed.

Shop around for a best price, and a trustworthy garage !

Good Luck !

A FixYa rating would be Nice....Thanks.....John.

Posted on Feb 17, 2009

  • 1 Answer

SOURCE: renault espace auto box stuck in 3rd gear

how do you fill it up and where is the filling cap??

Posted on Jul 18, 2009

  • 14585 Answers

SOURCE: when car cold all ok but when warm gear selection

the only other thing to check would be the cables to the shifter. they need to be checked when you have the problem, casing could be swelling when its hot

Posted on Jun 16, 2010

  • 31 Answers

SOURCE: I have an 89 honda accord, the 5th gear is out. i

it can't be the clutch, must be a problem with 5th gear in the transmission...

Posted on Oct 05, 2010

  • 11 Answers

SOURCE: Explorer 4WD manual 2000 stiff gear change

Are you sure you installed clutch plate facing right way? They are either stamped or have a tag says "flywheel side". Or might have wrong clutch kit.

Posted on Jun 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Very hard to get my 1999 1ltr polo into 5th geer when driving


if clutch operation is ok
linkage adjustments
check clutch hydraulic system for leak or bypass
check gearbox oil level
check engine and gear box mounts

26231559-pydfs01uymjn35d4pjpmt2o5-2-0.jpg

Jul 04, 2016 | Cars & Trucks

1 Answer

Hyundai 2013 I30 gearbox 'SKLITCH' between 5th and 6th gear


It sounds like BS to me but what do I know. I'm only in this business for 40 years. What they did was put heavy oil in the gear box to try to mask the sound. That's why it is difficult to shift (stiff).

Alway ask for the old parts when a replacement is not visible after repairs!

Apr 17, 2014 | 2011 Hyundai i30

2 Answers

Explorer 4WD manual 2000 stiff gear change


Are you sure you installed clutch plate facing right way? They are either stamped or have a tag says "flywheel side". Or might have wrong clutch kit.

Jun 26, 2012 | 2000 Ford Explorer

1 Answer

Ive replaced clutch and gear lever cables but it still is stiff going down throught the gears also had new gearbox on a j2 lantra


1. replace your gear oil.
2. is this an automatic or manual transmission engine? if manual, adjust your clutch release a little higher than usual to let your clutch engange earlier.

Aug 17, 2011 | 1998 Hyundai Elantra

1 Answer

Audi a4 tdi stiff gearchange worse when hot 1197 model


tandard practice to change the oil on a clutch replacement. Was the replacemmiles it's covered, but it's not sounds like the gearbox oil need changing. You don't say how many miles it has done. Gear box oil is not usually changed in a clutch replacement. Did an Audi garage carry out the rlacement? It could be the cable needs adjusting to allow the clutch to have free movement

Jul 23, 2009 | 1997 Audi A4

1 Answer

I recently had a new clutch fiited on My peugeot 406 GLX 1999 model, and lately the gears have been stiff.


this could be 1 of 4 things

you have become use to change characteristics of the old well worn/broken down oil - but even so new oil should not be excessivey stiffer

incorrectly adjusted clutch - although 406s had a self adjuster cable

incorrectly installed clutch

or most probably

wrong gear box oil - i have experience this, garages will use one grade/type of gear oil - check what spec your car is meant to have and change it - it made a huge difference on my peugeot

the oil filler and drain are accessible by removing the road wheel on the gearbox side of the car

Nov 06, 2008 | Peugeot 405 Cars & Trucks

1 Answer

Changing gears very stiff


try 1 0f these solutions giving the cars age and not much discription.
1 check the level of your gear box oil

2 change the gear box oil or if automatic change the fluid for the transmision.( since you say changeing gears i take it that it's manual gear box.

3 if manual the gears need over hauled giving the age of your car.

4 your clutch cable needs adjusted due ware on the clutch or if hydraulic the clutch system needs bleed with new fluid.

Oct 18, 2008 | 1997 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...