Question about 2002 Jeep Grand Cherokee

Open Question

How to remove and install heater core in 2004 jeep cherekee

Already have dash out

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: can't remove dash to replace heater core in 2004 jeep grand chero

Need more info.
Where is your hang up? If I remember correctly the Jeep dash pad (all of the plastic) comes off first then if you need more access, the metal structure of the dash comes out. Make sure you un-bolt and un-plug the Passenger Air Bag because that comes with the dash pad. DISCONNECT THE BATTERY while the air bag is disconnected and make sure your body is grounded while you un-plug and plug in the air bag!!!

Posted on Apr 20, 2009

Ad
  • 45 Answers

SOURCE: Heater Core replacement

yes you do have to disconect the a/c system.google dash removal for jeep.hope this helps

Posted on Oct 04, 2009

ZJLimited
  • 17970 Answers

SOURCE: Need diagram of fasteners to remove to remove dash

Review the Service Manual Jeep Cherokee Section-24-Heating-Air-Conditioning

Hope helped (remember rated this help) Good luck.

Posted on Oct 29, 2009

coupedeville
  • 97 Answers

SOURCE: 1984 Jeep CJ7 heater core leaking

  1. Disconnect battery ground cable and drain cooling system.
  2. Disconnect heater core hoses.
  3. Disconnect damper door control cables.
  4. Disconnect blower motor electrical connector.
  5. Disconnect water drain hose and defroster hose.
  6. Remove nuts retaining heater housing assembly to instrument panel. Remove heater housing assembly by tilting heater downward to disengage it from air inlet duct and pulling toward rear of vehicle.
  7. Remove heater core from heater housing.
  8. Reverse procedure to install.

Posted on Nov 17, 2009

agent91
  • 2100 Answers

SOURCE: dash removal

I think you should be able to remove the heater core without removing the dash. I don't know why it went bad, they usually last forever. Taking out the dash is a nightmare, and it isn't fun either. I wouldn't recommend it. If anything, just get it loose and up and out of the way on the right side enough to get to the heater. I just did a dash and believe me, it was no picnic. Hope this helps.

Posted on Apr 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing heater core on dodge dakota 2004


Removal & Installation

  1. Disconnect the battery negative cable.
  2. Remove the instrument panel from the vehicle.
  3. If equipped with air conditioning, recover the refrigerant.
  4. Disconnect the liquid line refrigerant line fitting from the evaporator inlet tube.
  5. Disconnect the accumulator inlet tube.
  6. Drain the cooling system.
  7. Disconnect the heater hoses from the heater core tubes.
  8. Remove the four nuts from the heater-A/C mounting studs on the engine compartment side of the dash panel.
  9. Remove the nut(s) that secure(s) the heater-A/C housing mounting brace to the stud(s) on the passenger compartment side of the dash board.
  10. Pull the housing rearward far enough for the mounting studs and evaporator condensate drain tube to clear the dash panel holes.
  11. Remove the housing from the vehicle.
  12. Lift the heater core out of the housing
Installation is the reverse of removal.


0996b43f8023128a-j1axptdruxmkgupulmd503d3-5-0.gif
Repair Guides Heater Core Removal Installation AutoZone com

Aug 18, 2017 | Dodge Cars & Trucks

1 Answer

How to install heater core if 1985 cj 7 jeep with 151 cubic inch


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Jan 06, 2011 | 1984 Jeep CJ7

1 Answer

Im replacing the heater core in 2001 jeep cherokee...i have the dash off down to fire wall...all screws are out of bottom heater box but I cant remove the bottom of box to get to heater core...what am I...


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 19, 2010 | 2001 Jeep Grand Cherokee

1 Answer

How to remove the heater core from a 1998 Jeep Cherokee Sport?


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 13, 2010 | 1998 Jeep Cherokee 4WD

1 Answer

Dash removal


I think you should be able to remove the heater core without removing the dash. I don't know why it went bad, they usually last forever. Taking out the dash is a nightmare, and it isn't fun either. I wouldn't recommend it. If anything, just get it loose and up and out of the way on the right side enough to get to the heater. I just did a dash and believe me, it was no picnic. Hope this helps.

Apr 22, 2010 | 2004 Jeep Grand Cherokee

1 Answer

I need something to show me how to remove the heater core in my 2002 grand cherokee. i already have the dash and everything eles out.


Review all the process in the WJ Service Manual (2000-2004) Section-24-Heating-Air-Conditioning-Ewj24 (page 51 and next).

I hope helps with this (remember rated this help) Good luck.

Dec 15, 2009 | 2002 Jeep Grand Cherokee

1 Answer

I was just told that my jeep needed a heater core and it would run around 700 is this something i can easily fix my self?


It depends on how handy you are. Heater cores can be a b@#$# to replace, you have to take half the dash apart. That's why it's so expensive, it's labor, not parts.

On the other hand, an '04 shouldn't need a core already, that's something a 10 year old car needs. Get a second opinion.

Nov 20, 2009 | 2004 Jeep Grand Cherokee

1 Answer

1984 Jeep CJ7 heater core leaking. '93 inline 6 motor. Wrangler dash. How to I remove the core?


  1. Disconnect battery ground cable and drain cooling system.
  2. Disconnect heater core hoses.
  3. Disconnect damper door control cables.
  4. Disconnect blower motor electrical connector.
  5. Disconnect water drain hose and defroster hose.
  6. Remove nuts retaining heater housing assembly to instrument panel. Remove heater housing assembly by tilting heater downward to disengage it from air inlet duct and pulling toward rear of vehicle.
  7. Remove heater core from heater housing.
  8. Reverse procedure to install.

Nov 17, 2009 | 1984 Jeep CJ7

1 Answer

Can't remove dash to replace heater core in 2004 jeep grand chero


Need more info.
Where is your hang up? If I remember correctly the Jeep dash pad (all of the plastic) comes off first then if you need more access, the metal structure of the dash comes out. Make sure you un-bolt and un-plug the Passenger Air Bag because that comes with the dash pad. DISCONNECT THE BATTERY while the air bag is disconnected and make sure your body is grounded while you un-plug and plug in the air bag!!!

Apr 05, 2009 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2002 Jeep Grand Cherokee Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...