Question about Ford Focus

Open Question

How to adjust throttle cable on ford focus - Focus Ford Cars & Trucks

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 51 Answers

SOURCE: Throttle cable

The easiest way to locate the cable might be to have someone assist you. Raise the hood and look toward the center of the motor. Have someone inside repeatedly step down on and let up on the accelerator. If you pay attention closely you should spot the movement of the throttle linkage and be able to trace the cable from there.

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford focus Zx3 2.0L 2005, do you think i can adjust the throttle position sensor?


No you can adjust the amount of cash you have in your wallet and buy a new one merry Christmas

Dec 09, 2016 | 2005 Ford Focus

1 Answer

How do i replace a ford focus throtle cable


disconnect the throttle cable from the throttle body. follow the throttle cable around the engine and you will find it goes through the fire wall and connects to the gas pedal. disconnect the cable from the gas pedal and pull out of the cab compartment from engine side. Pay close attention to how you disconnected the cable from the gas pedal and from the throttle body because you will have to reverse this procedure when you install the replacement. You will need an assistant who is pretty flexable to connect the cable to the gas pedal. so let the assistant disconnect the old cable from the gas pedal so he or she will know how to connect the new one back to the gas pedal. It was not an easy project for me and it definitely is not as easy as it seems to be. You will need plenty of time, daylight and patience. The replacement cable may be shorter than the original and that ok. Ford has made sure it will work. Use tie-wraps or zip-ties to hold the new throttle cable back in place around the engin. Good luck.

Jun 26, 2014 | 2000 Ford Focus

1 Answer

Where to adjust 2.0 liter ford focus idling


there is no adjustment it is run by a sensor. it is called idle air control valve

Feb 11, 2013 | 2007 Ford Focus 2.0

1 Answer

Throttle cable replacement


hooks on the throttle pedal and the engine end goes on a wheel or lever then is adjusted by means of the outer cable adjustment

Oct 05, 2012 | 2006 Ford Freestar Wagon

1 Answer

I adjusted my handbrake cable on my 2001 ford focus SE but it still acts like there is no brake. The cable tigtened so i dont think its broken but what is the solution to getting the "e-brake" to work?


The adjustment that you touched on the cable shouldn't be touched. Well it really only gets adjusted when new cable/s are installed or if after the drum brakes are adjusted and there is still play in the cable, then it is adjusted.

Apr 27, 2010 | 2001 Ford Focus

1 Answer

Focus over-revving


If you replace the throttle body,
Check the accelerator cable for correct installtion.
if correct.
Replace the accelerator cable

let me know

Sep 27, 2009 | 2003 Ford Focus

1 Answer

Throttle cable


The easiest way to locate the cable might be to have someone assist you. Raise the hood and look toward the center of the motor. Have someone inside repeatedly step down on and let up on the accelerator. If you pay attention closely you should spot the movement of the throttle linkage and be able to trace the cable from there.

Jan 31, 2009 | 2000 Ford Focus

1 Answer

Idol problems


the idle screw can be located by following the throttle cable to the carby body, you will find a quarter wheel which the cable hooks into at the bottom you'll see adjustment screw, this will adjust your idle speed.

Jul 13, 2008 | 2000 Ford Focus

2 Answers

Ford focus 2000 1:8cc


Throttle position sensor is on the throttle body, on the opposite of the throttle cable.

Jun 26, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...