Question about Saturn Vue

1 Answer

2003 saturn vue arm stabalizers connected to wheel and sway bar broke off

I am not sure if it is the sway bar, but there is a curved long bar that stretches from front left wheel to the right front wheel. on each side there is suppose to be another small arm, this time vertical rather than horizontal, which connects the long bar to the wheel next to the suspension, one has broken off from the long bar and on the other side the little arm is completely gone. i am wondering what these parts are exactly, how much they cost, and how to fix. please help. lost.

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Saturn Master
  • 496 Answers

Sway bar links.Cost $12 for cheap line and $40 for better, each.

Posted on Jun 02, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2003 Dodge Caravan Front end clunk.

Had similar problem with 2003 Dodge GC. Replaced the parts you mention + rack & pinion, then to fix the now noticable whining noise, replaced power steering pump and pulley. Fortunately was under an extended warrentee at 46k miles.

Posted on Jul 19, 2008

  • 1 Answer

SOURCE: saturn vue 2003 sway bar link and struts

I need the sway bar link to buy. How much will it cost me?

Posted on Dec 22, 2008

  • 186 Answers

SOURCE: I just had my wheel bearings replaced on both

Vues are bad for having all hub bearings make noise,check your rear ones.Or the ones you didn't have replaced.If it's all wheel drive check the propshaft center carrier bearing.Common to fail & make noise.hope this helps

Posted on May 13, 2009

  • 2 Answers

SOURCE: 2003 Protege5 front suspension knocking noise

Yes there is a bearing on the front stuts on the top under the upper strut mount and it is plastic. But the last guy was right it is most likely your struts, or it is your stabilizer links. There doesn't have to be much play in the links to make a tonne of noise. I replaced all my struts myself and it solved the problem for me. You can buy fully assembled strut kits for most veh so you don't have to compress the spring...just dont loosen fully the top middle large bold on top of the strut lol.

Posted on Jun 09, 2009

  • 543 Answers

SOURCE: How do you replace a center carrier bearing on an 03 Saturn Vue

about $200 in parts,,,you can not do this at home,,,,,you need special tools to press yoke on and off and even then sometimes they bend,,,not a easy job,,,,,,i am a master tech and worked at saturn for 8 years and i hated doing these

Posted on Apr 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Saturn truck rear end sways going over bumps. I have replaced the struts and sway bar links.


check with dealer for recalls vue had problems with rear sway
check axle bearings

Feb 07, 2016 | 2002 Saturn VUE

1 Answer

We have a 2003 saturn vue tha sway bar broke , easy to disconnect, now we got a new sway bar . My question is how do we install the curvy sway bar back to its spot ?What part(s) may need taken off to get...


remove the 2 pivot points under the car on the chassis sub frame . Disconnect the rods at either end of the sway bar at the rubbers . I would get all new rubbers for the sway bar and pivots before reassembly. Sway bars normally do not break as they are spring steel so it may have been weak or rubbing on a pivot from a missing rubber

May 09, 2014 | Cars & Trucks

1 Answer

How to install a sway bar on 2003 saturn vue


you need hydraulic jacks, I would buy or look through a Chiltons manual for your Saturn first.

May 07, 2014 | Cars & Trucks

1 Answer

94 ford thunderbird front end wheel assembly chassis bar that connects lower control arm to frame of vehicle in front end.


The bar would be the sway bar.

The parts that connect the sway bar to the lower control arm are called the sway bar links.

Oct 07, 2011 | Cars & Trucks

5 Answers

Why does my 2004 Saturn Vue squeak constantly while I am driving straight and turning corners. I will say the squeak is a little quieter when taking curves. I have brought it in twice. Once to Saturn who...


If it is not your brakes, or your rear shoes, being so they have been replaced, you may have a wheel bearing bad in the rear, or you may have a caliper that is not releasing pressure on the slides causing the brake to drag just a little. I think sense it is coming from the rear of the vehicle i am going to lean towards it being a wheel bearing. One more thing you can try, push the emergency or parking brake on half way when you hear the squeak not enough to lock up the brakes but enough so the brakes touch the drum. If the squeak stops then your parking brakes are you culprit!

Apr 05, 2010 | 2004 Saturn VUE

1 Answer

2006 saturn ion right side thumping on bumpy roads


either a bad sway bar end link noisy,or the lower control arm busgin is collapsed,if it slight noise its the sway bar link if its a loud metal to metal slap is the lower control arm bushing,,,check to see if its laying against the sub frame,it inline with the back of the front wheel and there is one 21mm bolt that goes thru it from the bottom,thats the are its at , common issue

Oct 15, 2009 | 2006 Saturn Vue

2 Answers

What is the purpose of the swine bar? The bar right by the tire. it has broke in my vehicle.


You mean the sway bar? If so, the sway bar or roll bar, or sometimes called the stabilizer bar. The sway bar has two functions.
  1. To prevent body roll or lean in a turn.
  2. It is used to control the handling of the vehicle and is tuned to your specific vehicle based on many characteristics.
You most definitely need to replace the broken sway bar. A vehicle with a broken sway bar is not a safe vehicle. The handling is not what it should be and this can be dangerous if you have to make a quick maneuver. Replace it, ASAP.

Sep 10, 2009 | 2002 Saturn VUE

3 Answers

Front end shakes at 50mph, possible stabalizer bar,


Do a replacement. There is no way to adjust the bar.

Aug 24, 2009 | 2006 Jeep Wrangler

2 Answers

Saturn vue 2003 sway bar link and struts


it all depends on what tools you have its not really that at my shop it would probable take 30-40 min to change the struts and 15min to change the links so its would be around 75.00

Oct 11, 2008 | 2003 Saturn VUE

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...