Question about 2005 Nissan Frontier

Open Question

How to change shifter indicator light for 2005 nissan frontier

Gear shift indicator light doesn't work

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 718 Answers

SOURCE: Nissan Sentra shifter lamp replacement

Transmission shift indicator light on center console.
First
make sure the fuse is good.
If the fuse is good then remove the screws holding the center console cover. You will need a long and short phillip screwdriver. Look for screws in the cup holder, under the handbrake handle and where the console runs under the dash. You may have to move seats forward/backward to reach the screws. When you attempt to raise the console cover you will notice you overlook a screws. Remove them also. You may be able to reach the bulb without removing the gear shift handle. DO NOT TOUCH any other electronics you see. The AIRBAG ACTUATOR is located here also. Replace bulb. Test before reassembly. Good Saturday morning project.

Posted on Mar 13, 2009

Ad
TwinTurboZ
  • 78 Answers

SOURCE: Wont shift out of park unless I stick a screw driver in a small hole above gear shifter.

You must remove the console yes, and you need to replace the shift lock solenoid.

Posted on May 15, 2009

  • 98 Answers

SOURCE: dashboard lights do not work on my 1996 nissan

check fuses

Posted on Jun 07, 2009

  • 1 Answer

SOURCE: 2007 nissan titan, electronic gear shifter inop

hi
my nissan titan 2007 batery died then i put new batery in but still cant trun on ????

Posted on Jun 27, 2009

  • 1 Answer

SOURCE: Timing belt change for a Nissan Frontier

how to replace the timing belt on my 2000 frontier 2.4

Posted on Jan 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 nissan frintier 5 speed standard shifter has a lot of slop can i fix it


The shift handle has a plastic bushing and metallic locks that holds it firmly and allow you shift the gears smoothly, so when this bushing or the has warned out, so the shift handle will develop a lot of slop, you may need to consider replacing it that kit.

Feb 20, 2015 | 1998 Nissan Frontier

1 Answer

Starting frontier after manually shifting automatic gear shifter without key?


The shifter lever must be in either neutral or drive. The Frontier has an unlock mechanism to shift the lever if is locked.

Oct 08, 2014 | 2000 Nissan Frontier

1 Answer

Gear shift moves but indicator doesn't change and transmission doesn't engage.


try disconnecting cable to transmission turn the shifter on transmission manually down there connect cable again start car try it if not try it again turn once then connect cable again then try it if not the transmission is not good

Jan 31, 2013 | 2002 Nissan Maxima

1 Answer

I have a 2005 nissan frontier that I changed the battery and now it starts but shakes and then sometimes starts


If it doesn't start every time I would double check for loose connections on the battery terminal. When it doesn't start, try wiggling the battery connections and try starting it again. Then you would want to fix the loose terminal connections. The spark plug gap does seem to be a bit big. I would just make a phone call to your local auto part store and they can tell you the exact gap that it should be.

Nov 13, 2012 | 2005 Nissan Frontier

1 Answer

Shifter indicator light doesn't work


Does it shift correctly?
Indicator on dash or on floor console?

It's just a bulb if it shifts correctly.

GL,
Td

Oct 06, 2012 | 1999 Jeep Grand Cherokee

1 Answer

Anti shift gear car wont come out of park


follow the steps . God bless you
Instructions
    • 1 Start the engine. Press firmly on the brake while wiggling the shifter from side to side.
    • 2 Remove the console surrounding the shifter. It is usually very easy although you may need to use the screwdriver to lift an edge or remove a clip
    • 3 Look inside the shifter mechanism for any sticky substance. Often when drinks are spilled on the console they seep down into the shifter mechanism and make the interlock solenoid sticky, meaning that it sticks closed when you press the brake and the car won't come out of park.
    • 4 Remove any sticky substance with the alcohol. Start the engine, press the brake and try to move the shifter out of park. If it still does not move then there may be another issue with the interlock.
    • 5 Examine the shifter for a release button that will allow you to move the vehicle out of park so it can be taken to a repair shop. It is usually hidden under a small flap or cover that will have to be lifted with a small screwdriver.

Oct 05, 2012 | 2005 Nissan Frontier

1 Answer

I have a 2000 Nissan Frontier, the distributor rotor doesn't turn?


This is an indication that the gear at the base of the distributor has broken. More seroius situation would be a broken gear on the cam.
If the rotor is truly not turning, the distributor needs to be pulled to check the condition of each gear.

Make certain that the rotor is pushed down securely onto the distributor post, too.

May 07, 2011 | 2000 Nissan Frontier

1 Answer

I can't shift into reverse. All other 5 gears are


My VW is not shifting into reverse at all; I think a certain person was driving and mistakenly pressed the gear shifter down for all gears--reverse is the only gear you press the shifter down first in. Doesn't grind, 1 2 3 and 4 work but no reverse no reverse lights.
I've read several complicated (can't see scenario's) posts on screens and linkage and a cable fixed one guys problem but still no solutions.

Oct 07, 2009 | 2002 Nissan Frontier Crew Cab

1 Answer

Wont shift out of park unless I stick a screw driver in a small hole above gear shifter.


You must remove the console yes, and you need to replace the shift lock solenoid.

May 11, 2009 | 2005 Nissan Altima

2 Answers

Automatic Gear Shifter Light Burned Out


You shifter indicator bulb (194 bulb number) has burned out. Pretty easy and cheap fix. The top of the indicator has to be removed/lifted up and teh bulb needs to be replaced.

Oct 24, 2008 | 2001 Nissan Sentra

Not finding what you are looking for?
2005 Nissan Frontier Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...