Question about 2005 Chrysler Pacifica Touring

Open Question

Chrysler pacifica upper radiator hose shrink

I change the thermostat before

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MrScary66613
  • 1990 Answers

SOURCE: I need to replace the thermostat for a 2005 chrysler pacifica

Follow the Upper Radiator Hose to the Block. There is a Bell housing there that the Hose Connects to. Remove that Bellhousing and the Thermostat is Right Under it.

Posted on Jan 15, 2009

Ad
bibleman01
  • 334 Answers

SOURCE: Replace thermostat for 2005 pacifica

yes thats it The two or three bolts you need to take out and then the thermostat will be right under the cover you take off then replace in reverse procedure

Posted on Jan 15, 2009

Murphybanton
  • 2004 Answers

SOURCE: OBD-II reads DTC P0305

DTC P0305 means Misfire Detected, Cylinder No. 5

Since this is the problem then you should let Chrysler handle the problem.

You can also confirm this at http://www.troublecodes.net/chrysler/

Rate this.

Posted on Jul 30, 2009

  • 9 Answers

SOURCE: No heat in 2003 Chrysler Town & Country mini

LIGHT IT ON FIRE THEN YOU WILL BE WARM

Posted on Oct 27, 2009

gordanddar
  • 477 Answers

SOURCE: 1995 Chrysler Cirrus overheating

Probably not water pump. Engine is notourious for vapour lock.
Cooling system must be blead of air before thermostat will work. Cool bottom rad hose is a dead give away. If you are still watching this forum reply , and I will walk you through the only way I know how to make it work properly. It's actually easy if you do it my way. I have worked on lots of cars , and this engine was the hardest to bleed out. Did one Yesterday , and works perfect.

Posted on May 16, 2010

Testimonial: "I need help on how to bleed the system thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 Chrysler pacifica touring, changed upper radiator hose and its still overheating. Bubbling from the reservoir


Hi, you have a few things it could be , you will have to wait till the car cools down and look at the expansion tank level if its a way down below the level then you may have a leakage then again it maybe a sticking thermostat this is the cheapest option. You may also look at a new radiator cap this is what i would change first.

Jan 15, 2016 | Chrysler Cars & Trucks

1 Answer

What tools needed for a2006 Chrysler pacif u cia thermostat


Disconnect battery ,remove upper radiator hose at engine, remove two bolts, clean surfaces and put in new thermostat and gasket
tools-needed-a2006-chrysler-pacif-u-cia-iry3h1nmf3wgiswisvvjjp0k-2-0.gif

Mar 30, 2015 | 2006 Chrysler Pacifica

2 Answers

2005 Chrysler Pacifica: Brothers and Sisters Help ME!!!! I had water pump & Timing done and now my upper radiator hose continue to pop-off. Please advised Carefully (As this is my only source of t


Usually, hoses pop off if the radiator/expansion tank cap is incorrect/broken. Find out if this "mechanic" changed the cap, if they did, get the old one back or get a replacement from the dealer. I have never gotten a dependable replacement from any parts stores. If they didn't change it, change it anyway and see what happens.

Mar 09, 2017 | 2005 Chrysler Pacifica Touring

1 Answer

How does the thermostat fit properly in the housing


selectachapter.gif

Pacifica, 2003-2005
Removal & Installation

Print Here is how to do it,if it does'nt fit right make sure you have the right thermostat.


3.5L Engine


CAUTION Never remove pressure cap with the system hot and under pressure because serious burns from coolant can occur.

  1. Disconnect negative cable from remote jumper terminal.
  2. Drain cooling system.
  3. Disconnect radiator upper hose from thermostat housing.
  4. Remove thermostat housing bolts.
  5. Remove housing, thermostat, and gasket.

    0996b43f80204be2.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the coolant outlet connector (1) and thermostat housing (2)-3.5L engine
    View of the coolant outlet connector (1) and thermostat housing (2)-3.5L engine

  6. Clean gasket sealing surfaces.

To install:
  1. Install thermostat and gasket into thermostat housing. For ease of installation, install bolts in housing for thermostat and gasket retention.
  2. Install thermostat and housing to the intake manifold. Tighten the bolts to 105 inch lbs. (12 Nm).
  3. Connect radiator hoses and install hose clamp.
  4. Refill cooling system.
  5. Connect negative cable to remote jumper terminal

May 02, 2012 | 2004 Chrysler Pacifica

1 Answer

Were is thermostat located for a 2008 Pacifica and would this cause heat loss between 65-75 degrees?


I would follow the upper radiator hose to the engine it should be right there where the housing is

Nov 21, 2011 | 2008 Chrysler Pacifica

1 Answer

Changing thermostat in a 2004 Pacifica


3.5L, under the housing where the lower radiator hose hooks to.
3.8L, under the housing where the upper radiator hose hooks to.
Hope this helps, James Booth

May 18, 2011 | Chrysler Pacifica Cars & Trucks

1 Answer

It Started about 6 months ago on my 2005 chrysler Pacifica v6 3.8. my upper radiator hose colapses when i rev the engine up and it gets really hot. i can tell by the smell. i have replaced my thermostat...


REPLACE UPPER RADIATOR HOSE IT IS TOO SOFT WORN OUT CAUSE HOSE TO CLASP.I WOULD REMOVE THERMOSTAT FLUSH ENGINE BLOCK AND RADIATOR COOLANT SYSTEM NEED FLUSHING OUT.

Dec 14, 2010 | 2005 Chrysler Pacifica

1 Answer

2007 Chrysler Pacifica heater blows cold air - A/C is fine. What is the problem??


Hello, seems like your thermostat may be stuck open. After the vehicle been running more than 10min feel the upper radiator hose it should be hot to the touch and if not a new thermostat is needed.

Mar 23, 2010 | 2007 Chrysler Pacifica FWD New Cars

1 Answer

I need to replace the thermostat for a 2005 chrysler pacifica


Follow the Upper Radiator Hose to the Block. There is a Bell housing there that the Hose Connects to. Remove that Bellhousing and the Thermostat is Right Under it.

Jan 15, 2009 | 2005 Chrysler Pacifica

Not finding what you are looking for?
2005 Chrysler Pacifica Touring Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...