Question about Cars & Trucks

Open Question

How do I replace battery cable on chevy s-10 pickup

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: No hood release cable Chevy S10 truck

I have this same problem. You have to take a screw-driver (philips) and look between the hood and the grill and you will see the hood latch assembly. There will be a large gauge wire with a loop about the size of a large philips head screw-driver. This is the release. Take the screw-driver and push the wire towards the drivers side door and it will release.

Posted on Sep 04, 2009

Testimonial: "THanks, solution concise and tells me where to look and how to do it. Because I was looking to taking off my grill and not sure how to do that."

Ad
riceski
  • 1851 Answers

SOURCE: chevy s 10 pickup will not crack , possible

first off - there can be other factors - long before the fuel pump - - how about the filter? if u spray fuel into the intake does it run for a few seconds or at least 'fire off' showing it wants to run but needs fuel? Also check ur spark before u go that far - as to the tank -much easier to remove the tank - EMPTY -- get a friend -as it is gas and once it goes - it will kill u quick - - and put a jack under the tank - remove the bolts - lower it just a little bit - then remove the lines - there are special lines so check with the dealer - free advice they are good for too - - also take down the VIN number and check for a recall - might be a free repair -

Posted on Dec 26, 2009

SOURCE: won't start/replaced battery/ 1984 s-10

You tested the starter?

Posted on Mar 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to make horn stop working in a 1996 chevy s10


Simply disconnect your battery negative cable until you are done with the repair. If you need more info after that, let me know.

Apr 22, 2014 | 1996 Chevrolet S-10 Pickup

1 Answer

Replaced the starter solenoid on my 83 Chevy S10 Pickup


Are you not getting voltage to the battery post on the solenoid, or the terminal for the wire from the key switch ?
You have a neutral safety switch between the starter and the key switch if that is the circuit in question.
Also take a look at the ground cable and connections.

Jul 23, 2012 | 1998 Chevrolet S-10 Pickup

1 Answer

1998 Chevy S10 Pickup - Emergency Brake is stuck. How do I repair?


Your emergency break has a cable. I would say the cable is broke, in the lock position. I don't know the specifics, but the cable is probably broke.

Feb 17, 2011 | 1998 Chevrolet S-10 Pickup

2 Answers

How do I turn off the service engine soon light on my 1992 chevy pickup full size


Turn the ignition key to the ON position without starting the engine.

Press the accelerator pedal three times quickly. The light will go off. It will return again in 3000 miles to remind you again.

Jan 28, 2010 | 1999 Chevrolet S-10 Pickup

1 Answer

Having problems with chevy s10 replaced fuel pump


Check the cable that goes from your battery to the fuse box the relay that is clicking is on. Check for lose bolts or corrosion of the contacts or something like that. If the relay is clicking it sounds to me like it is a voltage issue going to the relay.

Oct 05, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

How do i reset the error codes on a 1999 Chevy S-10, 2.2 L 4cyl?


use a OBDII scan tool. You can buy them for $40 at Auto Zone or Advance Auto Parts. If you dont have a scan tool, disconnect the positive cable on the battery for 10 seconds

Jul 24, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

Compressor won't turn on


unhook the negative battery terminal for 20 seconds then replace cable back to battery

Jul 06, 2009 | 1999 Chevrolet S-10 Pickup

1 Answer

Wiring Diagram 1998 Chevy S-10 starter replacement


The starter has one large cable from the battery positive, and a wire that goes to the solenoid (Part of the starter) that becomes hot when the key ignition is turned to start. This also passes through the neutral safety switch. (So it wont start in gear) Not sure if this is what you need, a little vague.

May 10, 2009 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...