Question about Mercury Mariner

Open Question

2008 Mariner tail lights not working. Brake lights work and blinkers work, but tail lights do not. ????

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnny5846
  • 379 Answers

SOURCE: 2001 dodge neon tail lights inop

looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.

Posted on Dec 31, 2008

  • 3 Answers

SOURCE: Tail lights but no blinkers or brake lights

there are two turn signal flashers under dash one on fuse box and one next to the light switch have to look up behind dash behind light switch for second I had same problem

Posted on Mar 17, 2009

polarcycle
  • 1392 Answers

SOURCE: 2001 jeep wrangler brake lights won't work but

Check for a bad fuse, or a bad/misadjusted brake switch.

Posted on Jun 23, 2009

Mustgo
  • 2359 Answers

SOURCE: tail lights not coming on. wiring problem

Just to be sure, check out the bulbs and sockets.
Make sure the two dots sockets (look into the base) is using two dot bulbs.
====
Check the single brake switch that activate by the brake.
If you has a meter then please check out the contact points.
Sometime this switch move out of aligment.
Dirt can also be part of the problem.
===== I will apply 12V power to the brake switch socket and make sure the blubs light to rule out wire problem first.
Please post more infor on the comment window.

Posted on Aug 23, 2009

  • 112 Answers

SOURCE: NO LEFT SIDE TAIL ,STOP OR BLINKER REAR LEFTLIGHT

did you try to replace the bulb in the back normally when it blinks fast like that its just the bulb and its doulbe film thats why the brake and blinker dont work

Posted on Dec 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace multi-function switch 2005 mariner


The tail light is usually a bulb with lower wattage, so it won't glow as brightly as the brake and turn lights.. There should be one or two other bulbs in either of the two tail assy's. The turn signal can use the same bulb as the brake light. If so, it's up to the flasher assy to direct the lights to both come on, and/or for one to flash if the brake and turn signal is on, e.g.. There could also be a backup light.

So if the brake and turn lights don't operate, look to the fuses, and flasher assy. for possible replacement.

Jun 01, 2015 | 2005 Mercury Mariner Premier

1 Answer

No tail lights on my 2008 ford escape. driver rear blinker wasn't working. replaced bulb, but when i turn on the blinker both blinkers are blinking...front and back...


Not sure I follow your story.
The front and rear turn signal should blink on one side. If the tail lamps are not working, it could be a fuse or a problem with the wiring. And the tail lamps are on the same circuit as the front parking lamps.

Feb 26, 2014 | 2008 Ford Escape

1 Answer

No Brake lights. Working tail and blinker lights.


if there is a tow option on that truck check the wiring on the socket for the trailer.and where thy tie in to the rear lites sometimes ther is a short.hope this helps.lucas

Feb 19, 2014 | Dodge Ram Pickup 2500 Cars & Trucks

1 Answer

Blinker/Tail Light Issue


The Bulbs Have 2 filliments in them if 1 is burnt out that would give you the fast not working tail light there may be an issue with the brake light switch located above the brake pedal on the arm.

May 16, 2013 | 1997 Plymouth Voyager

1 Answer

The tail lights do not work. The headlights, blinkers, and brake lights work. I checked the fuses and they are all good.


It can be faulty tail light bulb or its issue with tail light control switch or its wiring's are short.

Check the voltage at fuse slot of tail light.Do you receive 12 volt there.If not,then it says tail light switch is not receiving power supply.


---------
There are few help links related to your problem.I suggest you refer the list and check the help links.Click the link below:-----
1994 Toyota Camry: Bypass Tail light Relay Circuit? http://whatisbyme.blogspot.in/2012/04/1994-toyota-camry-bypass-tail-light.html

-----------
2008 Toyota RAV4: Replace Tail light Lens Cover?


http://technoanswers.blogspot.in/2012/04/2008-toyota-rav4-replace-tail-light.html
--------
2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html
--------- Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html
---------- Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html
---------- Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------
Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

-----------

SOLVE YOUR 4 WAY FLASHER RELATED PROBLEMS HERE
http://repairhelpcenter.blogspot.com/2012/11/4-way-flasherturn-signal-flashersignal.html

----------
Thesedetails will help.
Thanks.

Nov 23, 2012 | Cars & Trucks

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

1996 chevrolet 1500 brake light and blinkers dont work


a bad turn signal switch the brake lights go threw the turn signal switch

Aug 26, 2012 | 1996 Chevrolet C1500

2 Answers

2008 ford f250: rear passenger brake,tail and blinker not working. the front blinker and side marker light on mirror works. dash blinker is blinking very fast


could be the tail lite housing. or the ground on the frame rail back near that location. remove the assembly till its hanging by its wires and remove the bulb. using a test lite probe the socket with the flasher on see if it blinks. if not go down under the rear of the truck and unplug the connector for both tail lites and do the same probe each connector on the harness that goes forward till your test lite starts to blink if it does there then the tail lite assembly is bad if not then repost and ill lead you further

Jan 20, 2011 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Tail lights not working while drive. brake,blinkers work


i have a crown victoria with brake lights no tail lights could you help me?

Nov 19, 2008 | 1989 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...