Question about 2006 Ford F-150

Open Question

How to replace steering shaft u joints on a ford f150 2006

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 344 Answers

SOURCE: the steering shaft that runs from the steering box to the column is worn at the middle joint. is there a way to fix without replaceing it?

No there is not,

Posted on Nov 29, 2012

Ad
warlock61
  • 659 Answers

SOURCE: Vibration in steering wheel

sounds like it could be the ball joints binding up

Posted on Mar 25, 2009

  • 7353 Answers

SOURCE: steering box removal ford expedition

are you replacing the box or the steering shaft u joint?? you dont have to take the box of the do that.

Posted on Sep 21, 2009

michigan man
  • 3533 Answers

SOURCE: replace drivers side cv joint and shaft

give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man

Posted on Nov 02, 2009

  • 279 Answers

SOURCE: drive shaft

find u a used driveshaft in the salvage yard just make sure you get the correct driveshaft for your turck

Posted on Jan 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Noise from front offside when turning the steering wheel right


this sounds like you may have a bad cv joint on the right side that will need replacing. replace the half shaft not just the outer joint.

Sep 04, 2014 | 2001 Ford Ka

1 Answer

Hi, i have a ford ranger 1992 4x4. i want to replace the 4 ball joint. i take off everything. i just wonder and can i take off both solid axle shaft so i can take off the ball joint


The steering knuckle has to be removed so you can use a ball-joint press to remove and install the ball joints. The drive axles must be removed so there will be enough room to get the steering knuckle to drop down far enough so it can be removed.

Sep 11, 2011 | 1992 Ford Ranger

1 Answer

99 GMC JIMMY. STEERING LOCKS DOWN SOMETIMES AFTER 1/4 TURN OF STEERING WHEEL. CHANGED PS PUMP, CHANGED STEERING GEAR BOX, CHANGED DRAG LINK, CHANGED BALL JOINTS, NO SIGN OF PHYSICAL BINDING WHAT IS...


Could be steering shaft on bottom of column that connects column to gearbox. Rag joint or u-joints on shaft are dry or seized. Try spraying rubber rag joint & u-joints on steering shaft with a good penetrating oil like PB Blaster. Work steering wheel all the way to left,spray, then turn all the way to right & spray some more.

Mar 21, 2011 | 2000 GMC Sierra

1 Answer

I have a thumping noise in the steering shaft on my 2003 ford f 150 it sounds like it is in the slip joint


its probably the u joint in the lower steering shaft. only serviced in the lower steering shaft

Jan 18, 2011 | Ford F-150 Cars & Trucks

1 Answer

Power steering not working, check power steering fluid and it is full


If you mean it is very hard to turn steering wheel & it wont or barely returns after steering to left or right. Look at bottom of steering column shaft under the hood. It is very common for steering shaft u-joints to become dried & seized up. Spray up both u-joints & rubber rag joint with a good penetrating oil like " PB Blaster" it is magnetic & will lubricate seized u-joints. Be sure to turn all the way left & spray & all the way right & spray. Let sit for a bit then turn wheel all the way left & all the way right. If it gets better then be sure to lubricate every so often. If it doesn't get better you will need to change the steering shaft.

Oct 17, 2010 | 1996 Ford Explorer

3 Answers

My steering is really stiff fluid is full no leaks


Had same trouble with my 2005 F-150. There are 2 universal joints on the steering column shaft, 1 in the center of the shaft and the second down by the steering box. Sprayed rust check on these joints over 5 days and they eventually freed up and then covered them with grease. She steers perfect now and I did that last fall.Saved 700 dollars at the dealer.

Mar 31, 2010 | 2006 Ford F-150

1 Answer

Vibration in steering wheel


sounds like it could be the ball joints binding up

Mar 25, 2009 | Ford E-350 Cars & Trucks

2 Answers

2001 Dodge Dakota loose steering


Hello
Welcome to FixYa
there is a u joint to be replaced on your steering shaft just after the steering shaft
open the hood look down to the steering shaft you will see a small u joint very common to go bad most auto parts stores carry the part
RD

Jan 12, 2009 | 2001 Dodge Dakota

Not finding what you are looking for?
2006 Ford F-150 Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...