Question about Mitsubishi L200

1 Answer

Valve clearance for mitsubishi L200

Just wondered what the valve clearance was

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 76,848 Answers

Take the rocker cover and the upper timing belt cover off.
Set No 1 Cylinder to TDC - use the markings on the cam spocket to get this - and confirm it's on the compression stroke by check both inlet and exhaust valves are closed and on the heel of the cam.
In this position, check rockers 1,2,4 and 5.
Take care with the feeler guage to make sure you're right under the pad under the adjuster screw properly and completely passing under it, not sticking part way.
Rotate the engine (crank shaft) 360 degrees. This should bring No 4 to TDC - confirm that both inlet and exhaust valves are closed and on the heel of the cam.
In this position, check rockers 3,6,7 and 8.

Clearance for Intake and Exhaust is 0.25mm at normal engine operating temp.

Don't forget to fit a new rocker cover gasket and half moon seal (use something like Hylomar to help make sure the half moon is sealed properly - usual suspect when rocker cover leaks at the back of the engine).

Posted on May 18, 2016

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: valve clearance

metric - inlet and exhaust .15 (engine cold) .25 (engine warm)

Posted on Nov 07, 2008

  • 73 Answers

SOURCE: valve adjustment

tiburon uses hydrolic lash adjusters there are no valve lash adjusting If you hearing a pecking sound on the top of the mtr try some oil additive or replace the hydrolic lash adjusters

Posted on Jun 15, 2009

  • 167 Answers

SOURCE: valve clearance

Hydraulic tappets fitted.Automatic adjustment.
If your engine is tapping then they may need to be replaced.
Hope this helps

Posted on Aug 01, 2009

  • 20 Answers

SOURCE: what are the tappet settings/clearance for a 2003

twenty five

Posted on Aug 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the valve clearance of nissan caravan


Valve lash is the end of the rocker arm and the valve stem clearance between. When the engine is running, due to the thermal expansion and contraction, if there is no gap between the rocker arm and the valve stem, rocker arm swells, the top valve open, the impact of engine power and economy. Engine valve clearance will be different, usually when the car is cold, the intake valve 0.08-0.10MM, clearance exhaust valves 0.10-0.12MM Car Diagnostic Tool

Aug 26, 2016 | Nissan Cars & Trucks

1 Answer

Valve clearance


Valve clearance Google search your year make and model valve clearance. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Checking and adjusting valves
Engine Valve Adjustment Procedure The Right Way
Valve Clearance Adjustment
Valve clearance Google Search

Aug 10, 2016 | Cars & Trucks

2 Answers

Valve clearance 4hj1 isuzu


Intake valves clearance cold 0.4mm(.016inches)
Exhaust valve clearance cold 0.4mm(.016inches)

Oct 28, 2015 | 2001 Isuzu Rodeo

1 Answer

I hear a ticking/rattling sound somewhere in or around the engine of my 2006 suzuki Forenza. The faster the acceleration, the faster the sound seems to be. Any idea what would it be? This is my first...


Sounds like your valves are knocking. They can be adjusted pretty cheap.
Or you could do it yourself. Basically you drive the car to get it up to normal
operating temperature, then remove the valve cover and use a feeler gauge
to measure/adjust the clearance between the rocker arm and the camshaft.
You would need to know the proper clearance clearance.

If you get a Chiltons manual for your car at Oreillys, it tells you how to do it.
And it tells you the clearance you need that i mentioned before.

But an engine/head shop should be able to do it for a reasonable price.

Sep 24, 2011 | 2006 Suzuki Forenza

1 Answer

Carburator and valve clearances


For the carb :
Idle r/min.- 1550+_50 r/min.
fuel level- 4.5+_5.0 mm
float height- 25.8+_1.0mm
pilot screw- 1-3/4 turns out
do you need jet #'s or not?

the "+_" signs are those plus-over-minus signs i cant do on my comp.

Valves:
valve diameter- in-30mm
ex-26mm

valve lift- in-5.5mm
ex-5.5mm

valve clearance or tappet clearance (cold):
in & ex: .08-.13mm

valve guide to valve stem clearance:
in-.010-.037mm
ex-.03-.057mm

valve guide I.D.: in & ex-5.5-5.512mm

valve stem O.D.:in-5.475-5.490mm
ex-5.455-5.470mm


Hope this helps.

Jan 30, 2011 | Suzuki Swift Cars & Trucks

3 Answers

Valve clearance 4hj1 isuzu engine


This is the specs for the 4H Diesel engine:
Intake valves clearance cold 0.4mm(.016inches)
Exhaust valve clearance cold 0.4mm(.016inches)

Jan 28, 2011 | 1995 Isuzu Pickup

4 Answers

What are the valve clearances for a 2e 12 valve engine?


I have Toyota Corolla EE80 2E engine with 12 valves. I recently top overhaul but the engine is not running in perfect condition. The engine rpm goes up and down (engine shaky). I set the rpm around 1200, if i set it lower than that the engine will stop. I check the engine timing with both the cam and crank on the correct mark. Sounds like the carburetor failure but i had service it but still the same. If i turn the distributor to the right (******) the engine rpm drop, than i turn it to the left (advance) but the rpm drop too, as i know the engine rpm should raise high and could hear the pinking sound from the valves if the the engine accelerate. For your info, i bought the cylinder head from someone who previously general overhaul his engine about 6 months ago. He dismantle his engine because of con rod problem. I just fix the cylinder head to my engine without grinding and adjusting the valves because it had been grind and adjusted 6 months ago. I check the spark plugs but look all black. I pull the plug cable one by one during the running it sounds all ok. Now i wonder what is actually wrong with the engine? Do i need to adjust the valve clearance too? What is the valve clearance for both exhaust and inlet, hot and cold? If i do the valve adjustment and yet still the problem, what is next?

Jan 02, 2011 | Toyota Corolla Cars & Trucks

1 Answer

Want to know what the valve clearances are for my 1999 hyndai excel


Adjust the jet valve clearance before the adjustment of the
intake valve clearance.
Jet valve clearance (hot engine)
[Standard value]. . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

now adjust valve clearance
Valve clearance (hot engine) [Standard value]
Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 mm (0.006 in.)
Exhaust. . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

Jul 30, 2009 | 1990 Hyundai Excel

2 Answers

Valve clearances


On the intake 0.0008 or 0.0020 (it's in between these 2)

this is for the stem to guide clearance. (for the intake)

The Exhaust 0.0018 to 0.0030 stem to guide clearance.

Jul 10, 2008 | 1993 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

887 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...