Question about Cars & Trucks

Open Question

Huyndai Trajet - how to change oil filter

I know where the filter housing (filter itself is inside as a separate part) is and I've let the oil leak out of engine via under engine service opening. But, how should the oil filter be removed exactly? There is a six corner bolt on side of filter housing for leaking oil out from filter. And another on top of filter housing. I've opened them both and tried to turn the housing - no results. Is it ment to be turned or what? Thanks for kind help

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mrgreenz
  • 962 Answers

SOURCE: 1996 honda prelude oil leak

did you check the steering pump, AC compression pump, etc or other engine components ? it could be something other than the engine.

Posted on Nov 18, 2008

brainyass
  • 242 Answers

SOURCE: Oil leak from top side of oil filter

Make sure you oil the rubber seal on the oil filter and tighten the oil filter 3/4 of a turn more after the seal is flush with the bracket.

Posted on Nov 20, 2008

mrgreenz
  • 962 Answers

SOURCE: oil leak on right side under top engine cover

your valve cover gasket may have blown. This can happen if you overfill above the required dipstick level. take off the valve cover and check the gasket. Better to be under the level than over. The oil preassure will try to blow from where ever there is a weak gasket.

Posted on Nov 28, 2008

  • 512 Answers

SOURCE: oil leak

a bolt goesthrough the centerof that housing that if memory serves me right is a t55 or t60 torx. it is a tight fit to get to and the bolt is hard to turn because it also has an oring on it

Posted on Feb 01, 2009

  • 1 Answer

SOURCE: I have an oil leak from under oil filter housing

yes it is safe to take it off. just put some sealant on it or replace the gasket and put it back . this happened to me on 1999 clk 430 . take the belt off to make it easy on your self

Posted on Apr 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trans missom oil filter for hyundia trajet v6 how to change


transmission oil filters are normally inside the transmission and will require the pan to be removed . They will not need attention unless you have drastic problems with the transmission
Mostly all that is needed is a an oil change

Feb 04, 2015 | Hyundai Trajet Cars & Trucks

1 Answer

How to change fuel filter on 05 nissan altima


you must buy a new filter like the one your looking @, OK ?

Jan 28, 2013 | 2005 Nissan Altima

1 Answer

Oil leak from oil filter housing


Your oil filter is too tight,causing the rubber gasket to tork and not seal,I've done it on my 85 nissan 720.Everytime I do a oil change,I have to make sure I don't over tighten filter.Loosen a little bit,wipe all oil up so you will know if it's fixed.You may have to replace filter if gasket is messed up from overtightening.

Sep 19, 2012 | 1989 Ford F 250

1 Answer

92 oldsmobile 88 royale check engine code 55


Check the Mass Air Flow Sensor, you can get a can of cleaner specific for cleaning them for a couple bucks at the parts store. I'd just get 1 and clean the sensor see if that works. The MAF sensor is either in the throttle body itself (bolted on from the outside or in the air line between the filter and throttle body. That could be the whole problem right there. Good luck.

Jun 28, 2012 | 1992 Oldsmobile 88 Royale

1 Answer

Oil leak from oil filter housing


Hello,
  1. First check and make sure the filter is not lose.
  2. You might want to pull the oil filter and check to see if the gasket has spit or if more than one was accidentally put on during the last oil change,
  3. Should that check out there then, with the oil filter off, take and try to rotate the housing itself a bit. Just see if there is some movement. If there is then there is a nut that you can tighten up. It the nut will be on the same bolt shaft that the oil filter screws onto. Sometimes when taking off a really stuck filter the housing can come loose.
  4. There are also two hoses attached to the oil filter housing. Make sure they have not ruptured or that the clap has not failed.

A ton of pressure goes through the oil filter housing. You don't want to drive the vehicle until this is fixed because all your oil can leak out rather quick and seize your engine. Regards, Tony

Apr 13, 2011 | 1996 Land Rover Discovery

3 Answers

Oil is leaking from where the oil filter is screwed into... is this the oil pump? is it difficult to replace?


Oil pump?

Your filter is leaking, check it out.

Can only be the adapter or the filter gasket

Feb 19, 2011 | 2005 Chrysler Town & Country

4 Answers

I have oil coming from the oil filter houseing unit?


It is possible that it could be leaking oil from the oil filter adapter (Sometimes called housing) where it mounts to the engine block. Leaks here are pretty rare. More likely, your oil pressure sending unit is leaking oil. It screws into the back side of the oil filter adapter and can sometimes make it look like the adapter is leaking.

Dec 27, 2010 | 2006 Chevrolet Impala

2 Answers

How to replace the fuel filter on a hyundai trajet 2 litre diesel


On the Hyundai Entourage, the Fuel Filter (built in Fuel Pump assembly). No maintenance schedule.

May 17, 2009 | Hyundai Entourage Cars & Trucks

2 Answers

Oil leak from oil filter


There is an "O" ring between the Oil filter housing and the adapter that will leak as well. Remove the oil filter and check inside of the housing for a large nut. Remove the nut and separate the adapter from the housing. Check the "o" ring between them and replace with new "o" ring. That's where mine is leaking and I've read a couple of others that had the same problem. The old ring started out "round" and has, over time, become flat. The new ring should start out with a flatter cross section that will seal better. Good luck! (Easy Fix, but finding the "o" ring may be a challenge. Check for the ring at the Honda Dealer as the Passport is the same basic vehicle.) Do it during the next oil change........

Feb 10, 2009 | 1997 Isuzu Rodeo

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...