Question about Chevrolet Cavalier

Open Question

How to remove glove box for 2002 cavalier - Cavalier Chevrolet Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75797 Answers

SOURCE: Finding the blower resistor 2002 Expedition

u must remove the hush panel under the glove box to see the part.

Posted on Jul 23, 2009

harley9701ha
  • 424 Answers

SOURCE: 2002 ford explorer

The tempeartue actuator is on the driver's side of the evap. case. It is located on the side of the case near the gas pedal.

Posted on Nov 05, 2009

  • 3600 Answers

SOURCE: vent door stuck and can't remove glove box

why can't you remove the glove box? You can get at the door from under the dash but it's a ***** to do. try lubing the vent cables unless it uses the vacuum motor, if it uses the vac. motor it will be hard to get to without the glove box being out.

Posted on Jan 05, 2010

Testimonial: "Thanks! I just don't know how to remove the glovebox."

emissionwiz
  • 75797 Answers

SOURCE: glove box removal

Remove the screws around the inside edge of the GB liner and just work the liner out.

Posted on Jun 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a fuel pump cut off switch on a 2002 Chevrolet cavalier 2.2 liter 4door


Have a look in the glove box or in the trunk, under the carpet

Mar 21, 2016 | Chevrolet Cars & Trucks

1 Answer

Where is heater core located on 2001 cavalier


http://www.ehow.com/how_5513117_replace-heater-core-cavalier.html

the only thing I would do differently is I would pinch off the heater hoses and not drain the entire cooling system. This is a nice configuration behind the glove box where the entire heater box doesn't need to be removed like on the majority of other cars.

Mar 25, 2013 | 2001 Chevrolet Cavalier

1 Answer

How to replace the cabin filter in 2002 pathfinder


The Cabin Filter is located behind the glove box.
  1. Towards the lower end of the glove box is a couple pins that will slide out.
  2. Just pull the pins out and completely remove the glove box by pulling it towards you.
  3. Now remove that panel behind the glove box.
  4. You will see some screws holding the cabin filter in.
  5. The finisher has two screws that hold it in place.
  6. Remove them screws and pull it out.
  7. There will be a screw hidden behind it.
  8. Remove it.
  9. Remove old Cabin Filter

Regards, Tony

Mar 24, 2011 | 2002 Nissan Pathfinder

1 Answer

How do I replace the dash board lights in a 2002 Hyundai Santa fe? Also How do I replace the Cabin Air filter?


To change the cabin air filter one needs to remove the glove box first. This is reasonably simple and involves a couple of screws, the rubber glove box limit pads, and a 10mm nut. The air filter is located in the heater assembly directly behind the glove box. The filter is removed by releasing the plastic clip holding the filter and withdrawing the filter forwards. (The filter is installed like a vertical drawer.). The Hyundai web site (www.hmaservice.com) has a good description.
For a 2002, you simply slip the black ring off of the glove box clip on the right, and pull the left side of the glove box in slightly so the rubber glove box limit pad will clear it's channel. That allows the glove box to open forward and gives access to the heater assembly directly behind the glove box. The air filter holder is held in place by four plastic clips that you squeeze together in pairs to release the holder. Pull it out like a drawer. Remove the old filter by squeezing the top and bottom (or front and back, depending on how you hold it) of the filter together. This will bow the white plastic sides of the filter so that they clear the four small, black plastic protrusions from the sides of the holder that keep the filter in place. Reverse the process with the new filter and you are done. Takes about 10 minutes.

Nov 30, 2009 | 2002 Hyundai Santa Fe

1 Answer

How do I change the cabin filter on my 2002 Honda Accord SE?


There are two filters.
You have the remove the glove box. Three screws on the bottom edge. Remove them, then open the glove box door. Three plastic covers along the top edge, remove with something that won't cut them up. Remove screws under them (two screws under the center one). Then, push the glove box hinges toward each other to disengage the clips in the dashboard. Then pull the glove box assembly down and out (when the box is part way out, disconnect the glove box light connector before you take it the rest of the way).
Once the glove box is out, remove the three screws (two on the right, one on the left) of the glove box reinforcement panel, then remove the panel (the bar looking thing next down from where you took the three screws out of the bottom of the glove box).
Release the snap at the bottom and remove the air conditioning filter lid.
Slide the upper and lower filter assemblies out of the evaporator housing.
Remove the old filters from the filter carriers, clean the carriers and inset the new filters.
Reverse procedure to install.
I know that this sound involved, but just take your time, and you can do it.
Hope this helps you.

Nov 08, 2009 | 2002 Honda Accord

1 Answer

How do I remove the glove box? I have removed 2 screws along the inside top and one screw on the right side that also had wire to support door. But the glove box still will not come out. It won't even...


After removing the three screws, the glove box is held with two clips - one on each side. The clips will come undone when you pull on the glove box with a little force. You will then need to unplug the switch/lamp connector.

Oct 01, 2009 | 2002 Buick LeSabre

2 Answers

Blower motor only works on high?


ther could be fuse or relay for that in fuse box (engine compartement

Jul 21, 2009 | 2002 Chevrolet Cavalier Coupe

1 Answer

1996 Chevrolet Cavalier LOC on my radio and glove box, also hard


glove box is just stuck. I hate to think what the service bill was. unhook a battery terminal to reset the radio or pull the fuse. hope it helps

Mar 19, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...