Question about 1990 Ford Ranger SuperCab

2 Answers

1990 Ford Ranger won't start

Turns over but won't start. Pulled a plug wire off and it isn't getting fire. Not sure what to check next or how to check it.

Posted by on

  • smokymtnrace Jan 20, 2009

    and how to check them?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 239 Answers

Check distrubutor an coil!

Posted on Jan 20, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

First thing is check the eec relay its near the battery next to the fuel pump relay one is gray other is brown

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause a 1990 Ford ranger to fire but not start?


Check to be sure you are getting fuel to the fuel rail. The fuel filter could be stopped up. Also I would check the nertia switch to be sure it has gotten turned off. This switch is the fuel shut off switch.

Jun 22, 2014 | 1990 Ford Ranger SuperCab

2 Answers

Change my spark plugs and distrubutor cap and the 85 ranger want start


You may have got the spark plug wires out of sequence.
Reseat the coil wire going to the center of the distributor cap Check the spark plug wires at the distributor against the firing order as follows:
The spark plug firing order is 1 - 4 - 2 - 5 - 3 - 6 The distributor rotor turns CLOCKWISE The engine cylinders / spark plugs are numbered :
firewall 3 - 6 2 - 5 1 - 4 front
Best wishes,
TF

Jun 03, 2011 | 1985 Ford Ranger

1 Answer

Need ford ranger 1990 engine 2.9 liter firing order diagram for wires and plugs, please call or email below 571-237-5328


For 1990 Ford Ranger 2.9 liter V-6 VIN "T" check the next firing diagram...


zjlimited_403.gif


Hope this helps (remember to rate and comment this free answer)

May 31, 2011 | Ford Ranger Cars & Trucks

2 Answers

1985 Ford ranger died and will not start....getting gas..have fire to the distrubutor, will turn over but not start.


You have fire to the Distributor, but do you have fire at the plugs? The 4 cylinders had an external timing belt behind a shroud. Look to see if you broke a timing belt. Or you could have a bad stator or module in the Distributor.

Feb 24, 2011 | 1985 Ford Ranger

2 Answers

1996 Ford Ranger will turn over but wont start lights work radio works


Sounds like a bad Ignition Module which would cause no firing of the plugs. Pull the #1 plug, put the plug wire back on it and hold the plug (with insulated pliers) to the metal on engine. Then have someone start the truck and see if the plug is firing.

Jan 06, 2011 | 1996 Ford Ranger SuperCab

1 Answer

Truck tries startingI have a 1990 Ford F150...won't start. I have fire to the top of the distributor and to the button on the bottom side of the dist, cap but when i put it all back together I get no


i doubt it's in the column... check the wires on your starter again, if they rattled loose and are touching they will crank the starter

May 30, 2009 | 1990 Ford F150

2 Answers

1985 Ford Ranger will not start when damp and cool outside.


possibly distributor cap getting wet. Try this. When it's not starting, remove distributor cap and dry inside and outside with hair dryer on warm setting. See if it starts then. If yes, replace cap and rotor and make sure plug wires are clean.
If it still doesn't start, you may be getting mositure in a wire connector that operates spark to plugs.

Are you getting spark at plugs when it own't start?
Check by getting a spark plug and plugging a spark plug wire into it and grounding the side of the plug. crank engine and watch for spark at gap.

May 25, 2009 | 1985 Ford Ranger

1 Answer

1990 ford ranger no fire through plug wires changed coil pack and dis pack timing belt 5months old


Does it have a TFI module on the distributor. A local parts store should be able to test that for you.

May 16, 2009 | 1990 Ford Ranger SuperCab

1 Answer

Cranking and running


make sure the sparkplug wires are in the right firing order good luck

Apr 27, 2009 | 1990 Ford Ranger SuperCab

1 Answer

I need a spark plug wiring diagram for a 1990 Ford Ranger 2.3L


auto parts stores should be able to tell you your firing order

Feb 26, 2009 | 1990 Ford Ranger SuperCab

Not finding what you are looking for?
1990 Ford Ranger SuperCab Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...