Question about 2004 Kia Sedona

1 Answer

Horn not working

Horn is not honking

Posted by on

  • Anonymous Apr 22, 2009

    I have a Kia Sedona 2003. The horn is currently not working at all but will periodically decide to work for a few days. ANy ideas???

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 31 Answers

Use your finger like everyone else.

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On 2002 olds Intrigue, installing new horns but as soon as wires are plugged in horn honks . Removed horn fuse and relay but horn still honks .when pushing horn button ,with no horns, the relay clicks


You may have wires that have become crossed. The wire to the horn and a hot wire have probably lost the outer insulation and crossed each other causing the horn to start honking when it is connected. Check the wires with an electrical tester.

Oct 25, 2016 | Cars & Trucks

1 Answer

Why won't my horn work on my 1991 jeep cherokee laredo?


the horn is simple , a horn a relay and switch, and fuse 15?.

but is complex by other factors.

1: the clock spring . no air bags in 1991, so very easy.



there are 2 ways to diagnose any horn..

1: hot wire it, does it now honk? if yes, hot wire the relay does it honk now?

2: or use any voltmeter ever made and find out why.



#2 is the save way.



id hot wire the horn and make sure that 1991 ground bolt

mount is really still at ground potential. id bet that bolt has

long sense rusted, and is useless, like most are by now.



the fuse and relay are both in the PDC

the PDC means, engine bay fuse box in gringo. (non jargon)

http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

here is 93 for free.

see horn page one and the 2 tests.

or see the schematic.

at there, see the fuse box see fuse 15 (PDC 15?)

same chapter, see PDF page 90 (sheet33)



as you can see if the fuse is good.

12vdc arrives at the Horn relay on 2 pins.

if the horn switch works the relay ENERGIZES (closes)

and 12vdc arrives at the horn, and it honks

if while honking, the horn casing is 12vdc,

then means the horn is no longer grounded, a common happenstance.



if the relay dont energize check the horn ring contacts or connectors to it for continuity.

the relay can be tested, in the car.

like this.

honking

pin 2 and 5 are 12v

pin 1 = 0 volts

pin 4 is 12v, if 0v the relay is bad.



easy huh., ?

May 14, 2014 | 1991 Jeep Cherokee Briarwood

1 Answer

Horn started honk when the start button is pushed


bad horn switch or security system when nuts.
you will need the FSM to diagnose this, complex it is.
owning a hybrid means , close by toyota mechanics. all the time.
complex to the extreme. read the FSM , it NY telephone book sized.
be the first clue.

but can be diagnose. we look at the 2 inputs to the horn relay
is either active, at horn honk time
if its the horn line then its bad
if its the security system that is bad.
if its a PITA, pull the relay. end honks for ever. or horn wire.

Jan 17, 2014 | 2008 Toyota Highlander Hybrid Limited 4WD

1 Answer

Where can I find my honk sensor in a 2006 Ford Focus? or How to fix my honk in a 2006 Ford focus? The honk is not working?


I believe there are 2 wires to the horn. One is power all the time, and the other is ground through the steering column wire to the horn button on the steering wheel, when it grounds out when pushed.
If it is a single wire to the horn, then there is a relay.

May 05, 2011 | Ford Focus Cars & Trucks

1 Answer

My car wont honk... help please


neither do i honk anymore ,its known as old age and things go wrong ,so try checking for power to the horn first then go from their ,like no power to horn ?why not ,and if power to horn i? is the horn working

Mar 05, 2011 | 2004 Scion xB

1 Answer

My horn used to honk when I locked my 1999 Jeep with the remote


If you have your owner's manual, there is a section that will tell you the exact sequence to press to enable/disable the horn bonk. It has three settings, chirp, honk, and off. The chirp is a really quick chirp of the horn. Honk is a longer honk. Off seems to be what you've set.

I hope this helps.

Aug 20, 2009 | 1999 Jeep Cherokee

1 Answer

Jetta no longer makes beeping sound when locked.


try honking the horn normally with horn button <key must be on> if horn works it is in the programing for comfort and convieniance system if no honk it's just the horn or wiring to horn.

Mar 21, 2009 | 2004 Volkswagen Jetta

1 Answer

Got honk


The alarm horn and the normal horn are not the same unit. Seems like your normal horn is bad.

May 14, 2008 | 1987 Isuzu Spacecab

Not finding what you are looking for?
2004 Kia Sedona Logo

Related Topics:

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...