Question about 2002 Honda Accord
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Check the alternator for 13.8V to 14.2V
Also check the bad diode inside the alternator for ripple AC.
Do you have access to a know good alternator?
Other things to check.
Here's a quick check list for most common cost of SRS / Air bag problem.
Dirty contacts on driver and passenger seat belt buckles
Dirty contacts on seat belt connectors (under seats)
Dirty contacts on driver and passenger sides weight sensors (under seat)
Weight on passenger seat
(Example: grocery package trigger SRS / Air Bag light on the way home.)
I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity problem.
I DO NOT recommend disconnecting the negative battery connector to clean the code(s).
Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.
Please rate my answer if it is useful to you.
Posted on Dec 16, 2009
Open the door of both sides (driver and passenger) and look for the panel for the fuses. Remove the panel and you will see the fuse box. The information of the fuses is on the panel.
Posted on May 03, 2009
If you look under the front seats you will see wires that are attached to the seat belt anchor.There is a plug joining them wires.Disconnect the plugs then clean them and replace.That should solve your problem.Note.Make sure the ignition is switched off befor doing so.Good luck.pippall
Posted on Jul 17, 2009
Hi, the bit is called a Torx Bit or a star bit. Don't get the type for a screwdriver, get the socket that would go on a ratchet, you'll need to put an extension on it of course to get in there. Push hard or it will strip. Give Honda a call and ask them what size it is for your car for sure, might be a 6mm or you can just buy a metric Torx Bit Set. Separately they are $3.99 at Autozone. Not sure how much the kit is. Good luck.
Posted on Oct 03, 2009
it should be located in the center console, behind your ashtray, under your radio, remove the ashtray and you will see it, this should give you access to the port, thanks
Posted on Oct 06, 2009
Tips for a great answer:
Sep 20, 2013 | Honda Cars & Trucks
Jun 11, 2013 | 1994 Honda Accord
Apr 19, 2013 | Honda Accord Cars & Trucks
Jul 12, 2010 | 2002 Honda Accord
Oct 06, 2009 | 2001 Honda Accord
Jul 05, 2008 | 2000 Honda Accord
159 people viewed this question
Usually answered in minutes!