Question about Chevrolet Cavalier

Open Question

Chevrolet Cavalier Alternator fuse for a 1997 2.4 L twin cam

Where is the alternator fuse located

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


SOURCE: serpentine belt diagram

there are a number of diagrams on the car its self. if u open ur hood u can see the altinater just under it there should b a diagram of the belt and usualy they have them on the hood underside or right there next to the radeator

Posted on Jan 31, 2009

  • 1 Answer

SOURCE: 1998 chevy cavalier Alternator Drive Belt diagram

Check out this link... better than a diagram, a photo.

note: on my screen this guy's "purple" circle looks more like a light blue, maybe lavender.

Posted on Jun 27, 2009

  • 63 Answers

SOURCE: alternator fuse location

fuse will be located in the engine compartment if it has one. mine was doing the same think but it was a bad ground wire. if you want to test this you can simply use a jumper cable and attach it to the negative battery terminal. then to the engine block. it should start charging if that was the problem

Posted on Jan 15, 2010

  • 79189 Answers

SOURCE: Torque Converter Clutch Circuit Stuck On

the torque converter clutch circuit is inside the torque converter and is not something u can repair, the torque converter must be cut apart and rebuilt by companies who specialize in this, so all you can do is pull the transmission out of the car and replace the torque converter with a rebuilt or new unit.

Posted on May 27, 2010

  • 100 Answers

SOURCE: My 2001 Chevrolet Cavalier won't turn over.

first check the starter, it may need some cleaning especially the terminals for the contact inside. next the ignition switch, maybe the plastic with the wires is worn out thus not having contact.

Posted on May 31, 2010

Testimonial: "Great advice."

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Electrical problems 1997 cavalier

First make sure the battery is fully charged. Also make sure the belt on the alternator is not broken/missing. after you charge the battery,start the vehicle and put a voltage meter/multimeter on volts dc and apply the leads to the battery posts,you should see anywhere from 13-14.5 volts from the alternator if it is working. if not,check the fuse or fuses for the alternator. if the fuse is good,replace the alternator,and test the battery.

Jun 15, 2014 | 1997 Chevrolet Cavalier

1 Answer

Where is the fuse located for the alternator on a 97 chevy cavalier z24

Well, the main line from the alternator to the battery is protected by a fuseable link at the starter. Its a large wire that acts like a fuse.

Oct 13, 2012 | 1997 Chevrolet Cavalier

1 Answer

How to replace alternator on 1992 Cavalier. I took off 3 bolts, and the belt off, but can't get the alternator to come out....

try a lever behind the alt to the block, it sounds like it is just jammed, these is a sliding bush that sometimes butts into the mounts

Dec 05, 2009 | 1997 Chevrolet Cavalier

1 Answer

I have a 1994 Cavalier, 3.1L V6 engine. I just

check all grounds going from the battery to the block and the body remove the wires and sand the body/block and the silver loop connectors problem should go away

Oct 19, 2009 | 1994 Chevrolet Cavalier

1 Answer

Replacing head gasket on my 94 cavalier I have removed the alternator, intake and exhaust are loose; question is how do I keep from throwing the timing off when I pull the head?

there is not a way to not affect the valve timing, the cam belt must be replaced in a repair like this, when u put it back together you must reset and confirm all the valve timing marks are in correct alignment, just no way way around this, if the cam is timed right the engines ignition timing is correct as well and will require no adjustment. this answer applies to all engine that use a cam drive belt.

Aug 13, 2009 | 1997 Chevrolet Cavalier

1 Answer

I have a 97 2.4l twin cam in 2001 will it work

It will work as long as you have the ECM to match the Motors. The regular 2.2 has a different engine management system then the 2.4 so the engine will fit but the ECM needs to understand the engine.
Good luck and hope this helps.

May 13, 2009 | 1997 Chevrolet Cavalier

1 Answer

Serpentine belt diagram

there are a number of diagrams on the car its self. if u open ur hood u can see the altinater just under it there should b a diagram of the belt and usualy they have them on the hood underside or right there next to the radeator

Jan 31, 2009 | 1997 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides