Question about 2000 Dodge Ram 3500

Open Question

Dtcs, p0216,p0230 new lift pump and new injection pump

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 202 Answers

SOURCE: Injection/transfer pump

hi there richard i am sorry to hear about your problem. but i would not replace the injector pump simply for the fact of the price for the pumps. There could be alot of veriables in this complication. and i would start with the less costly. Like the injectors you could have a few going out. or when was the last time the fuel filter has been replaced. another thing is could there be air posibly getting in the fuel system. These are just a few places to look. before resulting in a expensive injector pump. Hope this gives you some incite on your problem
Please rate if this was usefull for you
Thanks

Posted on May 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I set/reset injection timing diversion code P0216-A


Yes you need the dealer for this, it requires special testing and special testing equipment to diagnose the problem ands repair it, there is no quick fix, period.

Aug 13, 2016 | Cars & Trucks

1 Answer

6.5 chevrolet diesel trouble codes PO216&P1214


P0216 - Injector/Injection Timing Control Circuit
P1214 - Injection PumpTiming Offset

Feb 19, 2015 | Chevrolet Cars & Trucks

1 Answer

Injection pump code p0216 starts but has engine light with this code


You did not say what make model and year the vehicle is, but if it is a diesel volkswagen the code is for a problem with the fuel injection pump.

Jul 25, 2012 | Cars & Trucks

1 Answer

WHAT DOES P0230 MEAN


P0230 == "Fuel Pump Primary Circuit Malfunction"
A great plain-english explanation can be found here:http://www.obd-codes.com/p0230

If you're comfortable using basic tools, you may find this link helpful:http://www.hotrodlane.cc/New%20LS%20Links%20Page/LS%20trouble%20codes/DTC%20P0230.htm

May 03, 2012 | 2001 Dodge Ram 2500 Truck

1 Answer

Transit pump code p0216 how can i fix this


P0216 DTC - Injection Timing Control Circuit Malfunction and this means the diesel fuel injection pump has a timing failure. This could be that the injection pump timing needs adjusted OR the failure is internal to the injection pump and therefore non-adjustable.

NOTE: If your vehicle is a Dodge Ram with Cummins engine then be aware that fuel delivery problems frequently cause this code. Prolonged fuel delivery problems can cause injection pump failure!

Symptoms of a P0216 DTC may include:
Low power
Crank, but no start
Hard start
Displays an intermittent stumble or miss
Engine may start and then stall
Engine may appear to drive fine but surge at idle


The most frequent cause of this code is a bad injection pump due to poor fuel delivery. Fuel delivery problems could be:
A plugged diesel fuel filter
An in-tank blockage
Air in the fuel due to a cracked in-tank fuel ine above the fuel level
Bad transfer (lift) pump
Injection pump out of time


Possible Solutions: First, simply check if your injection pump timing is adjustable. If so, check the timing and adjust if necessary.

If you think that you may have a fuel delivery problem, then check the lift pump operation. On Dodge Ram with the Cummins engine, the lift pump should produce about 45 oz of diesel in 25 seconds of operation. This can be performed by disconnecting the fuel hose from the injection pump and pumping the fuel into an approved container. Bump the engine over but do not start it. Then the lift pump will operate for 25 seconds. If the fuel is aerated, then check/repair fuel line and recheck.

With the fuel hose connected the fuel pressure should be 10psi. If the fuel delivery tests fail, replace the diesel fuel filter and recheck.

If it still fails then verify there are no restrictions in the fuel tank

Then replace the lift (transfer) pump. IT SHOULD BE NOTED that if this code surfaced after a routine fuel filter replacement or if you have any of the above symptoms after routine fuel filter replacement, then suspect the fuel transfer pump. This occurs because even a weak transfer pump can still provide enough fuel for the engine to run. But when the fuel system\'s prime is lost due to fuel filter replacement, it may not restart again without fixing the fuel delivery problem.

If you found your injection pump to be bad, the lift pump should be checked for operation to protect the new injection pump. This is because weak or low output from lift pump are common cause of injection pump failure. There are some aftermarket kits that can be purchased to warn the operator when the fuel pressure/volume drops to level that could damage the injection pump.

Hope this helps (remember to rating this free answer and leave a testimonial comments).

Oct 11, 2011 | Cars & Trucks

1 Answer

I JUST WANT THE CODES FOR CHEVY TRAILBLAZER 2004...


  • Feb 7/11 - P0405
  • Jan 11/11 - P0336 - P0326
  • Dec 28/10 - P0217 - P0218 - P0163 - P0230 - P0231 - P0232
  • Dec 9/10 - Trouble Codes: P0170 - P0173 - P0162 - P0154 - P0142
  • Dec 6/10 - More DTC articles: P0157 - P0158 - P0160 - P0200
  • Nov 30/10 - DTC articles posted: P0505 - P0156
  • Nov 18/10 - More new articles: P0143 - P0144 - P0146 - P0147 - P0152
  • Nov 12/10 - P0120 - Throttle Position Sensor/Switch A Circuit Malfunction
  • Nov 11/10 - ECT Circuit Codes: P0116 - P0117
  • Nov 10/10 - P0111 - IAT Circuit Range/Performance Problem
  • Nov 7/10 - P0110 - Intake Air Temperature Circuit Malfunction
  • Nov 6/10 - P0108 - Manifold Absolute Pressure/Barometric Pressure Circuit High Input
  • Oct 21/10 - P0216 Injection Timing Control Circuit Malfunction
  • Sept 11/10 - Knock Sensor DTCs: P0327 P0332
  • Mar 15/10 - P0607 Control Module Performance Code
  • Mar 4/10 - P0606 PCM Processor Fault DTC
  • Feb 10/10 - New ECT Sensor article
  • Feb 9/10 - P0012 & P0022 - Camshaft Position - Timing Over-Retarded
  • Feb 2/10 - P0115 - Engine Coolantmag-glass_10x10.gif Temperature Circuit Malfunction DTC
  • Jan 19/10 - P0105 - MAP/Barometric Pressure Circuit Malfunction
  • Feb 10, 2011 | 2004 Chevrolet TrailBlazer

    1 Answer

    Po230 406 hdi 2001


    P0230 - Fuel Pump Primary Circuit Malfunction

    Check the wiring to these components first, power and earth etc, if wiring is ok you may have faulty components, especially the primary lift pump in the fuel tank, these are famous for failing.

    Keep us updated.

    Dec 22, 2010 | Peugeot Liberte Cars & Trucks

    1 Answer

    I was driveing down the road an my truckwhich is a 1999 dodge ram3/4 ton with the cummins turbo in it started spitting an spuddering an then died. the codes from a cheap scan tool showed p0216,p1690 and...


    The p1690 is the transfer pump code I believe. Unfortunately the engine will run without a good transfer pump for awhile. Eventually the main injection pump will fail due to lack of fuel pressure. The main injection pump requires 6 psi minimum. When the main pump fails and this is the unfortunate part it's trash. It is possible you just lost enough fuel psi that it died and a 160 dollar lift pump will fix you up. I would suggest a fuel psi gauge on all 98 and a half through 2002 dodge diesels. A 80 dollar gauge can save you about 1800 dollars and that 1800 is if you do it yourself.

    Oct 06, 2010 | Dodge Ram Pickup 2500 Cars & Trucks

    1 Answer

    Truck turns over. Is getting fuel but just wont fire.


    check the codes by turning the key on off on off on-no start ,look at the odometer and watch for codes p0216-p0215-p1688 if you have these you need a new injection pump there are a list of code that will cause this

    Aug 17, 2010 | 2000 Dodge Ram 3500

    1 Answer

    Code p0230 shos up on my 99 Mercury Sable. I just


    That code is: Fuel Pump Primary Circuit Malfunction. Could it be the wires are not on tight or one is shorted? Check wiring very carefully.

    May 19, 2010 | 1999 Mercury Sable

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    32 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    75197 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7782 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...