Question about 1995 GMC Sierra C1500

1 Answer

Headlight assembly replacement

How do I replace the headlight assemblies on my 1995 GMC Pickup.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 85 Answers

This is a pretty strait forward process but if you have never done it take it somewhere and ask them to show you how If you turn the adjustment screws it will be out of alignment or they will strip and your headlight alignment will never be right. You could also purchase a chilton or haynes manual for about $20 and it should be covered. You can get these at any parts store

Posted on May 01, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace the passenger side headlight on a 1995 GMC Safari?

Open up the hood and as you look at the light from above you will see a couple of screws/bolts holding the whole assembly in. Remove those and then you pull the lens out the front. From that point you can easily remove the lamp for replacement.

Oct 06, 2014 | 1995 GMC Safari

1 Answer

Lights will not turn on


It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.


To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----

All headlights not working?


Working of Headlight switch?
Both headlight bulbs blow together?

Car headlight bulbs don't last long?


2007 Dodge Caliber: Low Beam Headlight Not working


2003 Toyota Camry: Headlights Work Intermittently?


Chevy Tahoe: Low Beam Lamps are not working?


2001 Chevrolet Tahoe: Headlights not coming ON?


2004 Dodge Ram: High Beam Light is DIM?


2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?


Low beam headlights Modification?

How to Replace a Headlight

How to Replace a Headlight Bulb

How to Replace a Headlight Switch

How to Replace a Headlight Assembly

How to Replace a Park Light Assembly


Low beam headlights Modification?


Headlight Assembly Removal On Honda Accord


Honda Headlight Assembly Removal


How to Replace a Headlight Door


How to replace HID headlight bulbs for lexus 400h?


These will help.


Nov 28, 2012 | 1986 GMC K1500

1 Answer

Change 04 envoy bulb

Headlight Replacement (Envoy)

Lift hood, at top of each headlight assembly look for two L-shaped tabs. Pull these tabs straight up, this will release the headlight assembly. Lift assembly forward to gain access to rear of assembly. There two rubber caps, the top one is for access to the low beam and the bottom for the high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side of socket, install new bulb, DO NOT touch bulb glass with fingers. Reverse steps to re-assemble.

Jun 18, 2012 | 2004 GMC Envoy

2 Answers

How do I replace headlight bulb in passenger side 2009 gmc sierra truck


Jan 12, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

Replacing the low beam headlight on a 2004 gmc envoy

Just above the headlight assembly are two angled tabs, pull these straight up (they may need some effort). These will release the assembly, carefully pull the entire assembly forward. Access to the headlight bulb is behind the two rubber caps, the upper cap is for the low beam. Remove this cap, twist the headlight bulb socket CCW and remove. Disconnect bulb from harness by prying up gently on locking tab on socket, and pull bulb out. Being careful not to touch the new bulb glass surface with your finger, plug it into the socket and install it back into the headlight assembly turning it CW. Reinstall rubber cap, seat headlight assembly on frame, lining up the bottom and top pegs. Once the assembly is fully seated, push the two angled tabs down, locking the assembly in place.

Oct 15, 2009 | 2004 GMC Envoy

2 Answers

Need guidance on removing and replacing headlights. Chrome reflective coating has deteriorated and lights are not bright enough at night.

It should only be held on by some screws that are just above and below the lamp assembly... once the screws are out, the assembly will slide out and you can disconnect the wire harness on the back. There should already be grooves for you to access the screws

Aug 21, 2009 | 1995 Nissan Pickup

1 Answer

How do I replace a 1995 GMC Sierra A/C Heater Control Assembly?

If you have tilt stearing, lower the stearing wheel. Carefully remove the dash trim around the instrument panel and radio a/c controls. Unplug the headlight and truck bed light switches. Lay the trim panel aside. On the side of the control module gently slide a flat screwdriver in the slot until the clip disengages. (Look at the new one to see which way the clips face.) Repeat on other side. Disconnect wire harness plugs. Assembly for the new module is the reverse of the above. Be careful to use gentle pressure on the dash trim or it may break.

May 15, 2009 | 1995 GMC Sierra C1500

1 Answer

Replace headlight

It is quick and extremely easy to replace the headlights on the envoys. Look at the top of the headlight assembly. you will see a kinda large lever you can pull up. Pull it up and the entire headlight assembly will be released from the car. Be prepared to hold it, and whatever you do, do not touch the new bulb with your bear hands!!. Kinda self explanitary once you get the bracket loose by pulling up the lever. Replace the bulb, and put the assembly back in the same way,, and press back down on the lever. Your done,, takes about 2 to 3 minutes.

Jul 18, 2008 | 2002 GMC Envoy

Not finding what you are looking for?
1995 GMC Sierra C1500 Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

74269 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides