Question about Cars & Trucks

Open Question

Glue memory foam on wooden door - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would be the best way to fix a metal plate or trim on the outside of a wooden patio door?


2 part epoxys work very well . it will say wood metal plastic and bonds in around 5 minutes.

Apr 17, 2016 | Cars & Trucks

2 Answers

Headliner on my sunroof has fallen down. It is a 2009 Lincoln MKX. How do I fix it?


You will need to remove the entire headliner, being careful not to crack the foam it is constructed. You will need to remove all the plastic door pillar covers, any clothes hangers, the dome light, etc.
You can purchase headliner fabric and adhesive at most fabric stores. The personnel there will assist you in getting the correct adhesive. You must remove all the old headliner fabric and backing pad material to get to the foam core for installation of the new headliner fabric. Lay out the fabric and cut it to size, allowing for some overlap in case you err slightly when positioning it. You will apply the adhesive to the foam core and to the back of the headliner fabric. It is a contact-type cement. Carefully position the fabric over the foam core and work from the center out to position it, being careful not to trap wrinkles or to stretch the fabric excessively. Trim off the excess and reinstall headliner.

Dec 31, 2014 | 2009 Lincoln MKX AWD

1 Answer

Which Door is best UPVC doors or wooden Doors ?


Wooden doors need maintenance regularly because they have poor insulation & also a poor conductor of heat. Other than UPVC windows are more environmentally friendly with elegant looks. UPVC windows and doors use international quality hardware that allows ease of use. So I think UPVC windows & doors are better than wooden doors. If you want to know more difference visit here http://www.fenesta.com/wood-windows-doors.aspx

Nov 28, 2013 | Cars & Trucks

1 Answer

How do I get foam, glue, off the roof of a truck that had a camper cabover bunk?


try heat from a hairdryer and a wooden spatchler so not to scratch the paint...

Feb 25, 2012 | Ford E-350 Super Duty Cars & Trucks

1 Answer

The 1996 Jaguar headliner is sagging in the rear of the car. How do I repair the sag?


The problem is that the foam that is glued to the fabric. It becomes crumbly and disintegrates into messy little bits that get into your hair and all over your car's interior. Trying to spray glue, while the headliner is still up there, won't work for long. The foam will keep crumbling and glue won't stick to it. It's sort of like trying to glue some cloth to the ground. No way will it stick.

There is a temporary fix on the do-it-yourself aisles in the automotive weekend warrior stores. It is a product that has a little curly cue, and a clear plastic head. The product is called a "Saggy Stopper". The clear head blends in with your headliner's color. It looks promising for a temporary fix.

Feb 19, 2010 | 1994 Jaguar XJ6

1 Answer

How do i remove all of the old fabric &foam off of the backer board?


use a heat gun to heat {not toast} and this will soften the glue, be careful with your hands because that hot glue makes you scream if you get it on you, you can use a paint thinner to disolve the left over foam as long as the backing board is timber and NOT plastic. if your going to recover it, use an abrasive paper to scour it for a really good bond. Good luck

Nov 20, 2009 | 1997 Jeep Grand Cherokee

3 Answers

89 jetta carat rubber frame passenger door


use weather stripping glue check with auto zone

Oct 16, 2009 | 1989 Volkswagen Jetta 2 Door

1 Answer

Dome light comes on whenever it feels like it. I would go out to the garage and the light would be on. Then while driving it starts to go on and off. And flickers on and off as if it had a short. The only...


Find where the switch button contacts the door and using hot glue or double-sided foam tape, glue a penny to the door contact spot. That should push the switch button a little more. If no help, try the same thing on the passenger door. Hope that helps.

Jul 16, 2009 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...