Question about Chrysler Town & Country

Open Question

How to remove fog lights from town country - Town & Country Chrysler Cars & Trucks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 76 Answers

SOURCE: 2002 Chrysler Town and Country

Ok, i'm assuming your replacing them, there is an oval rubber stopper on the backside of the rotor, in the backing plate, located near the bottom. it will tighten or loosen the e-brake shoes inside the rotor, loosen them all the way off, then get a big hammer and give them a really good smack, be carefull not to damage the wheel studs, if your reusing them hit on the hat of the rotor, if replacing you can hit right on the rotor face.
Use some antiseize on the hub before installin your new rotors, and don't forget to readjust your
e-brake and reinstall the rubber plug

Posted on Nov 18, 2008

defadad
  • 351 Answers

SOURCE: removing and replacing passenger side mirror 2002 town and country van

there should be a triangle shaped plastic section on the interior of the door behind the mirror, check it for a little plastic screw cover to remove it or you may just have to lever it gently to remove it.
once it is off it exposes the mirror retaining bolts which you undo to remove the mirror, I presume it has electric mirrors and if that is the case you will have to find the electrical wire plug for the mirror and pull it apart, replace mirror in reverse order of removing

Posted on May 13, 2009

  • 3 Answers

SOURCE: 2007 Chrysler TOWN AND COUNTRY.. OVRHEAD MAP

I had the same problem on my 07 and it turned out to be caused by the bulbs getting too hot and melting the surrounding plastic which opened the circuit powering them. I was able to fix the problem by removing the bulbs and cleaning the sockets allowing the bulbs to seat correctly. The lenses snap off to give you access to the bulbs. If you are not familiar with how interiors of cars come apart, I would not suggest doing it as you may crack the lens.

Posted on Oct 13, 2009

  • 1986 Answers

SOURCE: Replacing bulbs in tail lights in a Town and Country.

  1. Open your tailgate.
  2. Look for two (2) round flat black discs about the size of a dime (but thicker) on the inside of the body (between the red lens and the weather striping).
  3. Using a pair of pliers, pull out each of these two discs.
    • Note they are in tight and may require a fair bit of force to remove.
  4. Make sure the inner part of the disc also comes out. There are two parts to this system, a grommet and a plug:
    1. Push the plug backwards through the grommet.
      • The grommet fits into the actual hole in the body, and is spread by the plug, the pressure holding them in place.
    2. Carefully remove both grommet and plug.
      • The lens assembly will fall away from the vehicle when you pull out the second grommet so be careful.
  5. Note the wiring harness that connects to a plug inside. Beside that plug are two holders for the actual bulbs.
  6. Remove the holder by pressing the sides inwards and pulling. The light socket should come out.

Posted on Oct 21, 2009

  • 181 Answers

SOURCE: remove expansion valve in 1996 town and country

Once you disconnect the lines there are two torx screws that hold it in place. Once removed it should just pull off.

Posted on May 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn on my fog lights in a 2000 Chrysler town and country van?


pull out on the knob for the head lights........it should pull out to turn them on and push in to turn them off

May 06, 2011 | 2000 Chrysler Town & Country

1 Answer

Where on a 2000 town and country LX is the control to turn on the fog lights?


When you turn on your headlights, pull the same button out and that should do it, but headlights have to be turned to on first.

Jan 24, 2011 | 2000 Chrysler Town & Country

1 Answer

Changing the tail light cover for 2003 town and country minivan


There really is no way to change just the cover. Open the hatch. There are two quarter sized round plastic clips that have to be gently pulled out. Then you can remove the tail light.

Feb 04, 2010 | 2003 Chrysler Town & Country

2 Answers

Foggin problem with 2000 T&C Van


Just replace the pollen (cabin) filter and should be fine.

Jan 02, 2010 | 2000 Chrysler Town & Country

1 Answer

Describe how to change fog lamp (just the bulb) on 2005 subaru forester. As far as I know the fog light assembly is fine, the bulb has just burned out. If you know which bulb to use please let me know,...


2005 Forester - It is easiest to remove the fog assembly.

1. From underneath the vehicle pry out one plastic fastener to be able to bend the light weight plastic mud protector downward. You will see the underside of the fog light assembly with one 10mm bolt directly above you. Remove this bolt.
2. From the front of the vehicle unscrew one 10mm bolt at top of fog light (this is the shorter of the 2 by the way) and pry out one plastic rivet adjacent to it.

3. Carefully remove the fog assembly and disconnect 2-pin power connector by pulling up on the release. Carefully wiggle the housing out (no force req'd).
4. Unscrew the back from the housing and replace H3 bulbs. Take care not to touch the bulb while replacing.

5. Reverse to install.

Should take an hour at most.

Dec 15, 2009 | 2005 Subaru Forester

1 Answer

My dome lights just quit working. all of them, all at once. Also lost factory fog lights at the same time.


Your dome light and fog lights may be integrated to the same fuse, check the fuses at your kick panel for any open circuits (blown fuses). Also make sure no fuses are blown under the hood.

Dec 04, 2009 | 2000 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...