Question about 1997 Chrysler Sebring

1 Answer

1997 Chrysler Sebring oil light keeps going on

The oil light keeps going on and I checked the oil level and it is at full. Is there something else I can check

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

No oil pressure or a sensor is defective.

Posted on Jan 05, 2013


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1986 Answers

SOURCE: Oil light keeps coming on but doesn't stay on.

Your sensor may be going bad, or you may have a leak somewhere. The light usually triggers if it detects a low pressure situation caused by a leak.

Posted on Sep 21, 2009

  • 1 Answer

SOURCE: milage odometer on 1997 Chrysler Sebring doesn't work

i got a better way you to fix it it free if you know how to solder. It works I did it this june and it still works

Posted on Sep 03, 2008

  • 202 Answers

SOURCE: 2002 Chrysler Sebring Oil pressure light

Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.

Posted on Mar 26, 2009

  • 1033 Answers

SOURCE: oil sending unit on 2004 chrysler sebring V6

Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove

Posted on Jan 03, 2010

  • 3085 Answers

SOURCE: 07 chrysler sebring check engine light and gascap

It might take 2 or 3 gas fill-ups before the light goes off. Don't worry.

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does the oil pressure light do ?

the oil pressure light operates on a sending unit mounted near/around the top of the engine on an oil galley. when the oil pressure reaches critically low levels (typically between 10-20 psi) the light will come on to indicate the problem. usually this is due to a low oil level. IMPORTANT- do no your motor with low oil pressure, this can cause irreversible damage to your engine! check your oil level if you are full on oil and the oil is not old (if its really old and gotten too hot a time or two it can become thin and loose viscosity) then you need to check your oil sender first as its the cheapest to replace (oil pumps dont often fail) reply to this solution and i can help walk you through this . hope this helps!

Feb 18, 2012 | 2002 Chrysler Sebring

2 Answers

I bought a 1998 Chrysler Sebring LXi recently and it didn't come with an owners manual... How many quarts of oil does the engine need?

Buy 5 qts of oil. Drain the oil and replace the filter. Add 4 qts and start the engine. let it idle for a few minutes. Shut it off and recheck the level on the dipstick, use the last qt to finish adding to full if necessary.

Sep 18, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

Oil light comes on at stop light. I checked the oil...its full

Oil light comes on due to low pressure, not oil volume. If this has chrysler 2.7 V6 they are known to have oil sludge build-up problem

Oct 02, 2009 | 2000 Chrysler Sebring

1 Answer

2002 Chrysler Sebring Oil pressure light

Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.

Mar 26, 2009 | 2002 Chrysler Sebring

1 Answer

Oil presure light comes on after diving for a while, at stop sign

without confirming oil pressure,(not level)are within normal specs,I would replace the oil pressure switch,If you need the location let me know. DB

Feb 01, 2009 | 2001 Chrysler Sebring

1 Answer

Oil light keeps coming on

normally when you have this problem it is the oil sending unit is sticking and it is normally located near the oil filter

Jan 22, 2009 | 2001 Chrysler Sebring

1 Answer

2004 chrysler sebring transmission was leaking but now has stop

Keep a close eye on the level, and watch for drops in driveway etc. Even try placing something under the transmission area if you have to, like cardboard or plywood. Good chance it didn't cure itself, but stranger things have happened I guess. Hope you used Mopar transmission oil to re-fill it. believe it or not, I don't work for Chrysler but have heard many a story about chrysler transmissions acting up because of wrong fluid in them, even when lube places tell you it's o.k to use something else. Just a heads up.

Dec 11, 2008 | 2004 Chrysler Sebring

Not finding what you are looking for?
1997 Chrysler Sebring Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides