Question about 1998 Toyota Camry

1 Answer

I need to find firing order and witch coil is coil # 1

Plug wires to coil and witch coil is coil #1

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,961 Answers

I assume it is a 4-cyl? Firing order is 1-3-4-2, and no 1 plug is at the front, or timing belt end of the engine.

Posted on Jan 13, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
BCAS1298
  • 3092 Answers

SOURCE: firing order 1998 corolla 1.8

Looking at coilpack with harness plug on right, front to back # 3 then # 1, below # 2 then # 4.

Posted on Jan 02, 2010

blueextc3221
  • 15935 Answers

SOURCE: I need the firing order for the spark plugs and plug wires I recently changed them and something is not in the correct order

0c41a37.gif
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question!

Posted on May 23, 2009

  • 104 Answers

SOURCE: Need some help. I did

i would pull the spark plugs and check for any cracks or carbon tracking, or a possible weak spark from the coil.

Posted on Oct 30, 2009

  • 4793 Answers

SOURCE: what is the firing order.Need to replace coil on plug number 7?

looking into the engine compartment of any car the front of the engine to the left is always no 1 cylinder,so...
1l 2r
3l 4r
5l 6r
7l 8r

Posted on Jul 09, 2010

  • 4 Answers

SOURCE: what is the order on

What motor is in the car?

Posted on Jun 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the Wire Order with distributor?


theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Aug 15, 2015 | 1987 Buick Regal

1 Answer

If i have a 1996 chevy cavalier i have the firing order for the spark plugs but need the order for the distributor or ignition coil


Firing Orders
  • Sending Units And Sensors
  • Starting System
  • GM Cavalier/Sunfire 1995-2000 Repair Guide

    FIRING ORDERS

    Print
    See Figures 1 and 2
    To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
    If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes to reflect how your engine is wired.


    0900c1528003cbe2.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Fig. 1: 2.2L (VIN 4) Engine Firing Order: 1-3-4-2 Distributorless Ignition System

    Apr 16, 2013 | 1996 Chevrolet Cavalier

    1 Answer

    No i need to know on a ford v10 the firing order and witch one is coil J


    The firing order is : 1-6-5-10-2-7-3-8-4-9 The 1 thru 5 cylinder are from front to back on the passenger side while 6-10 are from front to rear on the drivers side
    I see in my research that the engine has a coil on each plug. However, I can't find any info on how the coils are designated. Just a thought though, if you are looking for coil J and J happens to be the 10th letter of the alphabet, maybe it's cylinder 10 ?

    Apr 11, 2011 | Ford E-350 Cars & Trucks

    1 Answer

    I had two spark plug wires come off the coil,need the firing order on the motor and coil,It's a 3.9V6


    STANDING FRONT OF VECHICLE CYLINDERS FACING YOU ARE 4 5 6 AND BACK CYLINDERS IS 1 2 3 NOW ON PIECE PAPER LOOKING AT IGNITION COIL PACK FACING YOU WRITE BACK NUMBERS 123 AND UNDER THAT NUMBER 1 2 3 WRITE FRONT NUMBERS 5 6 4 THATS YOUR COIL PACK PLUG WIRES LOCATION. LIKE I SAY 5 6 4 IS PLUGS WIRES LOCATION FACING YOU AND BACK NUMBERS 1 2 3 PLUG WIRES LOCATION ON COIL PACK. FIRING ORDER IS 1 4 2 5 3 6

    Apr 04, 2011 | 2004 Ford Freestar

    1 Answer

    No spark on all 4 plugs


    You will need to remove your ignition coil disconnect battery use proper socket size remove bolts then coil and unplug unit reinstall tighten down bolt and nuts plug coil back in be sure to put ignition wires back in accordance to firing order witch is 1-3-4-2.Now restart engine.

    Dec 26, 2010 | 2006 Nissan Altima

    2 Answers

    2000 ford mustang code 453 and missfire cyl 5 where is the cyl


    a haynes manual from a parts place will show you--or chec the condition of each plug wire-if one looks bad or falls apart--probly need to get all new wires /plugs

    Dec 18, 2010 | 2000 Ford Mustang

    3 Answers

    Trying to find a firing order diagram for a 91 ford aerostar 4.0L V6. I have a book for it, but it is impossible to put the plug wires on the coil block in the order they describe, wires are too short! ...


    For the 4.0L V6:
    Firing Order:

    1-4-2-5-3-6
    Cylinders:
    ........(back)........
    |...3...|.......|...6...|
    |...2...|.......|...5...|
    |...1...|.......|...4...|
    .........(front)
    Ignition Coil Connections:
    ..(back)
    1...2...3
    5...6...4

    Aug 08, 2010 | 1991 Ford Aerostar Extended

    1 Answer

    I need the diagram to put the spark plug cables


    2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
    Spark Plug Wires - Removal & Installation

    3.5L Engine
    1. Before servicing the vehicle, refer to the Precautions Section.
      NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
    2. Remove the intake manifold cover, if required.
    3. Disconnect the left side spark plug wires from the spark plugs.
    4. Disconnect the left side spark plug wires from the ignition coil.
    5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
    6. Remove the spark plug wire assembly.
    7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
    8. Disconnect the right side spark plug wires from the spark plugs.
    9. Disconnect the right side spark plugs from the ignition coils.
    10. Remove the spark plug wire assembly.
    11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
    To install:
    1. Install the spark plug wire assembly.
    2. Connect the right side spark plugs to the ignition coils.
    3. Connect the right side spark plug wires to the spark plugs.
    4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
    5. Install the spark plug wire assembly.
    6. Connect the left side spark plug wires to the spark plugs.
    7. Connect the left side spark plug wires to the ignition coil.
    8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
    9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
    10. Install the intake manifold cover, if required.

    Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
    74d742b.jpg


    Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    306b531.jpg


    Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    9313fa7.jpg


    Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
    2c9af72.jpg


    Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    d929c16.jpg


    Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
    f357cd3.jpg

    Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
    09e9db9.jpg

    I really hope help you with this (remember rated this help) Good luck.

    Sep 23, 2009 | 2003 Chevrolet Malibu

    Not finding what you are looking for?
    1998 Toyota Camry Logo

    Related Topics:

    290 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8575 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...