Question about 2004 Nissan Murano

Open Question

Where is the fuse for 2004 murano winshield washer pump motor

Fluid won't pump out of either washer, must be fuse or motor

Posted by on

5 Suggested Answers

shaggyrat
  • 1224 Answers

SOURCE: Winshield washer motor does not run

These days, most windshield washer pumps are mounted to the bottom of the washer fluid reservoir. Where’s that, you ask? Well, inner+fender+w+text.jpgyou know that spout you pour the fluid into—the one that disappears into nowhere? Well, the reservoir is actually 2384f71.jpglocated inside the front fender between the bumper and the front wheel. To replace the pump, you will have to jack up the vehicle, remove the front wheel and then remove the inner fender liner.

Posted on Jun 13, 2008

  • 106 Answers

SOURCE: Winshield washer 2002 LeSabre

try the fuse first. then try sticking a pin into the washer jets. then try having the washer fluid pump/motor replace. if those are not the case, then you need a new switch to operate the pump motor. (a whole new control column)

Posted on Jul 24, 2008

  • 274 Answers

SOURCE: winshield washer pump has stopped pumping on 1996

Sounds like pump alright Unbolt tank from car and pump should be screwed to bottom of tank Another way is fit a universal inline washer pump Up to you whether you want to keep your car original

Posted on Oct 22, 2009

tbirdfan1
  • 3051 Answers

SOURCE: washer fluid won't spray, don't think it's frozen

Hello there:
if you have checked the right fuse and it is ok than i would check the wiring to see if there is a break some where in the wire or if it is grounded somewhere also check to see if it has voltage going to the motor t if so than i would check the motor itself with the meter to see if it has high ohms if so than the motor is shot it does not have to be froze to be bad but if you dont have high ohms than the motor may be good but the pump itself may need to be primed ok?
I hope that this has been very helpful for you
best regards michael

Posted on Oct 31, 2009

wracefans24
  • 1985 Answers

SOURCE: washer fluid pump not humming or trying to push fluid to windshie

disconnect the connector and have a friend push the washer button while you check the wires for power with a test light.its probably a bad motor, they are about $15.00

Posted on Dec 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why when i push the button for my winshield my wipers work but no washer fluid comes out and i dont hear the sound like the motor is not running...can anyone help me?


If you have washer fluid in the contaner under your hood, then have someone listen with the hood up to see if the motor on the pump runs. If it does not run you have a loose connection usually at the washer motor or a bad fuze to the water pump. Fuse is in the fuse cluster, usually under the dash.

Nov 17, 2015 | Cars & Trucks

1 Answer

Does the 2005 Nissan Murano SE have rear window washer? If so, where do I fill the rear wiper fluid?


Yes it does and the washer fluid reservoir under the hood is for both the front and rear. The following is a diagram of the washer pump and hoses so you can check for operation or leaks.

http://www.nissanmurano.org/forums/attachments/problems/15059d1233342517-rear-washer-fluid-not-squirting-washer-motor.jpg

Feb 21, 2013 | 2005 Nissan Murano SE

2 Answers

2004 volvo s80 winshield washer fluid not pumping


PULL THE HOSE LOSE FROM THE PUMP. IF ITS PUMPING THEN THE LINES ARE STOPPED UP. IF NOT PUMPING THEN YOU NEED A PUMP

Jul 14, 2012 | 2004 Volvo S80

1 Answer

Windshield washer does not work; no sound coming from the motor/pump. where is the fuse for the windshield washer motor/pump?


check wiring to pump with test light see if hot first, If not find fuse in owners Manuel, if its hot need a pump, they do go bad

Mar 15, 2011 | 2004 Nissan Murano

1 Answer

My wiper fluid wont come out


Check and verify that you indeed have the winshield washer tank filled if the tank is filled make sure the winshield washer hoses are attached to the washer nozzles under the hood if all of this checks out you probably have a bad windshield washer pump...

Dec 07, 2010 | 2004 Honda Civic

1 Answer

The winshield washer fluid won't work, but it sounds like I can hear the little motor when I push the end of the wiper blade switch


Push the washer fluid button and hold it for 20 sec then look under the truck and seeif you see the washer fluid dripping on to the ground, if theres no sign of the washer fluid then you have a bad washer pump, which is located on the side of the washer bottle, if theres fluid dripping then you will need to follow the line, start at the washer nozzles, this is where it breaks the most, if the line is plastic you can use a peice of rubber hose that size and connect the broken line back together with the hose, hope this helps.

Nov 10, 2010 | 2004 Dodge Ram 1500

3 Answers

Winshield washer fluid will not come out and you can not hear the motor the fuses are fine do I need a new motor for the winshield washer fluid. any advice would be very much appreciated.


WIPER FLUID LEVEL COULD BE LOW. ADD SOME MORE WIPER FLUID.IF FLUID LEVEL OKAY CHECK WIPER SPRAY NOZZLES COULD BE CLOGGED CLEAN THEM WITH A SMALL PIECE OF WIRE SMALL AS TINY PAPER CLIP WHICH CAN BE USED..

Oct 20, 2010 | Pontiac G6 Cars & Trucks

2 Answers

Winshield washer fluid doesnt come out do i need the motor or fus


can you hear the pump running.  If not check the fuses.  If you do and there is fluid.  Remove a hose from the back of the nozzle and se if fluid flows.  If so clean the nozzles with a needle as they plug up.

Mar 26, 2009 | 2002 Toyota Camry

1 Answer

Winshield washer 2002 LeSabre


try the fuse first. then try sticking a pin into the washer jets. then try having the washer fluid pump/motor replace. if those are not the case, then you need a new switch to operate the pump motor. (a whole new control column)

Jul 24, 2008 | 2002 Buick LeSabre

1 Answer

Winshield washer motor does not run


These days, most windshield washer pumps are mounted to the bottom of the washer fluid reservoir. Where’s that, you ask? Well, inner+fender+w+text.jpgyou know that spout you pour the fluid into—the one that disappears into nowhere? Well, the reservoir is actually 2384f71.jpglocated inside the front fender between the bumper and the front wheel. To replace the pump, you will have to jack up the vehicle, remove the front wheel and then remove the inner fender liner.

Jun 08, 2008 | 2001 Honda Civic

Not finding what you are looking for?
2004 Nissan Murano Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...