Question about 2009 GMC Yukon

1 Answer

Tire sensor light stays on sensor work in 09 GMC

All four tire sensors are new and functioning, but the dash light stays on for check tire monitors.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 34 Answers

I do believe this has to be reset by the dealer

Posted on Jan 05, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 51 Answers

SOURCE: Changing a tire and releasing the spare tire on a 2004 GMC Envoy

the instructions and tools should be under the second row seats.

Posted on Oct 08, 2008

  • 341 Answers

SOURCE: Check Engine Light?

there are 3 one on each side of eng. on the Y pipe one behind the cat. convertor. not to hard change

Posted on Oct 22, 2008

  • 2039 Answers

SOURCE: 2008 Gmc Sierra ----- tire pressure sensors

im in cold quebec there preset i install snow tire with rim on those with regular valve light stay on because people dont whant to spsnd and extra $160.00 for those valve in cold zone tire pressure are low be ready to reset that computer many time this winter pierre

Posted on Dec 19, 2008

  • 2 Answers

SOURCE: 2008 GMC 2500 Sierra - Change factory tire pressure setting

Let me understand this.. I ask you guy's a question and before you send me the answer, you want to charge me. Then you ask if I resolved the problem and if so, tell you how I did it. Well I did resolve it and I would be more than happy to tell you how. $29.95 with get my detailed response.

Posted on Feb 16, 2009

  • 131 Answers

SOURCE: 2004 GMC Yukon with 4.8L engine; oil pressure

check your spare tire for proper inflation its tripped me up before

Posted on Feb 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 envoy that had a problem with the tire monitor sensor light coming on..our mechanic but in all four sensors and the light still is on..do you have a suggestion


Get another mechanic, and try to get a refund for what was charged for the four sensors replaced. Or, have the mechanic complete the repair at no additional cost.

Feb 10, 2017 | 2007 GMC Envoy

1 Answer

If a tire sensor is bad, will it affect my four wheel drive on my 2007 Xterra? I lost four wheel drive and four lights came on, on my dash


If you mean TPMS sensor, that monitors air pressure in the tire, when one of those fails, it will usually point to that tire, Those sensors are battery powered, so they do fail. The other side of the issue is the module that reads the sensors, if it fails then it can show all four tires as failing. You can go to a good tire shop and see if they have the tool that reads the sensors to tell you if it is one sensor or not. That way you don't have to pay for dealer diagnostics.

Sep 23, 2016 | Nissan Xterra Cars & Trucks

1 Answer

2006 Pacifica & the (!) light is on and says service tire system soon..1 tire low pressure. I put new tires on it yesterday and the light hasn't gone off. Could it be because I don't have a spare


If you had tires installed and light stayed on it is possible not having spare but normally the tps sensor (tire pressure sensor) or tpm tire pressure monitor or it got damaged when new tires got installed.

Jul 01, 2015 | Cars & Trucks

1 Answer

09 town & country chime ringing seatbelt always on


If it's your tire pressure monitoring system, then you may have a low tire. The tpms light in the dash will be on too. As the vehicle is moving, the tires generate heat which will increase the temperature inside the tire, which will also increase the pressure inside the tire, which will turn the tpms light off. The light only comes on when the tire is low so add air to the tires to bring them to the manufacturers recommended tire pressure on the placard on your drivers door or drivers door frame. I do not know of any tpms system that chime when a low tire situation is present. If it's actually the seatbelt causing the chime, then there should be a seatbelt light that comes on in the dash as well. The seatbelt sensor may be malfunctioning. Otherwise, the chime may be due to another issue. Check your owners manual for possible causes.

Jul 08, 2012 | 2009 Chrysler Town and Country

1 Answer

Service tire monitor on what is the problem? how do you reset the system?


TIRE PRESSURE MONITOR SYSTEM
The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. If your vehicle has this feature, sensors are mounted on each tire and wheel assembly, except the spare tire. The TPMS sensors monitor the air pressure in your vehicle's tires and transmit tire pressure readings to a receiver located in the vehicle.

The TPMS is designed to alert the driver, if a low tire pressure condition exists. This system also allows the driver to check tire pressure levels using the Driver Information Center (DIC).

When a low tire pressure condition is detected, the TPMS displays the "CHECK TIRE PRESSURE" warning message on the DIC, and at the same time illuminates the low tire pressure warning symbol.

You may notice, during cooler weather conditions, that the tire pressure monitor light, located on the instrument panel cluster, and the "CHECK TIRE PRESSURE" message will appear when the vehicle is first started and then turn off as you start to drive the vehicle. This could be an early indicator that the tire pressures are getting low and need to be inflated to the proper pressure.

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper inflation pressure for those tires.)

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

The "CHECK TIRE PRESSURE" warning message and low tire pressure light (telltale) will appear at each ignition cycle until the tires are inflated to the correct inflation pressure.

The Tire and Loading Information label (tire information placard) shows the size of your vehicle's original tires and the correct inflation pressure for your vehicle's tires when they are cold.

Your vehicle's TPMS can alert you about a low tire pressure condition but it does not replace normal tire maintenance.

NOTICE: Do not use a tire sealant if your vehicle has Tire Pressure Monitors. The liquid sealant can damage the tire pressure monitor sensors.

RESETTING THE TPMS IDENTIFICATION CODES
Each TPMS sensor has a unique identification code. Any time you rotate your vehicle's tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. Each tire/wheel position is matched to a sensor, by increasing or decreasing the tire's air pressure. The sensors are matched to the tire/wheel positions in the following order: LF TIRE (left front tire on the driver's side of the vehicle), RF TIRE (right front tire on the passengers side of the vehicle), RR TIRE (right rear tire on the passengers side of the vehicle), and LR TIRE (left rear tire on the driver's side of the vehicle).

You will have one minute to match the first tire/wheel position, and five minutes overall to match all four tire/wheel positions. If it takes longer than one minute, to match the first tire and wheel, or more than five minutes to match all four tire and wheel positions the matching process stops and you will need to start over.

The TPMS sensor matching process is outlined below:
  1. Set the parking brake.
  2. Turn the ignition switch to "RUN" with the engine off.
  3. Turn the headlamp switch from "OFF" to the parking lamps setting four times within three seconds. A double horn chirp will sound and the TPMS low tire warning light will begin to flash. The double horn chirp and flashing TPMS warning light indicate that the TPMS matching process has started. The TPMS warning light should continue flashing throughout the matching procedure. The "SERVICE TIRE MONITOR" message will be displayed on the Driver Information Center (DIC).
  4. Start with the driver's side front tire.
  5. Remove the valve cap from the valve cap stem. Activate the TPMS sensor by increasing or decreasing the tire's air pressure for 10 seconds, then stop and listen for a single horn chirp. The single horn chirp should sound within 15 seconds, confirming that the sensor identification code has been matched to this tire and wheel position. If you do not hear the confirming single horn chirp, you will need to start over with Step 1. To let air-pressure out of a tire you can use the pointed end of the valve cap, a pencil-style air pressure gage or a key.
  6. Proceed to the passenger's side front tire, and repeat the procedure in Step 5.
  7. Proceed to the passenger's side rear tire, and repeat the procedure in Step 5.
  8. Proceed to the driver's side rear tire, and repeat the procedure in Step 5.
  9. After hearing the confirming horn chirp for the left rear tire, check to see if the TPMS warning light is still flashing. If it is, turn the ignition switch to LOCK to exit the sensor matching process. If the TPMS warning light is not flashing, the five minute time limit has passed and you will need to start the process over beginning with Step 1.
  10. Set all four tires to the recommended air pressure level as indicated on the Tire and Loading Information label.
  11. Put the valve caps back on the valve stems. The spare tire does not have a TPMS sensor. If you replace one of the road tires with the spare, the "CHECK TIRE PRESSURE" message will be displayed on the DIC screen. This message should go off once you re-install the road tire containing the TPMS sensor. The "SERVICE TIRE MONITOR" message is displayed when the TPMS is malfunctioning. One or more missing or inoperable TPMS sensors will cause the service tire monitor message to be displayed.

Nov 23, 2010 | 2006 GMC Yukon

1 Answer

Why does the service tire monitor system light comes on and ow do I get it to go off. My left front tire does not register on the sensor.


Hello and welcome. this requires a high end scan tool to check. but since the left front tire does read any pressure. this is usually a bad tire pressure sensor. this is probably why the service tire pressure light is on. the sensor is mounted on the tire stem inside the wheel. this requires the tire to be removed from the wheel to replace sensor

Nov 06, 2010 | GMC Yukon XL Cars & Trucks

1 Answer

We have checked the all four tires for pressure and even checked the spare tire for pressure. Light still stays on and yes we have tried holding the button down to turn off the light. please help!


You have a defective or lazy sensor in one of the tires. You can try letting out as much air as possible in each tire, then refill each tire,checking the pressure with a gauge of course. This may reset the TPM (tire pressure monitor sensor)

Aug 26, 2010 | Toyota Sequoia Cars & Trucks

2 Answers

How to reset "Low Tire Pressure Mesasage" on 2008 GMC Envoy


It should reset by itself after you resolve the low pressure problem and drive it a bit. The sensor will usually reset within 24 hours if the vehicle is driven a couple of times. If it does not reset, the sensor could be damaged or defective.
BillB

Feb 12, 2010 | 2009 GMC Envoy

1 Answer

Dash board warning lights


This is the tire pressure sensor. It monitors the pressure levels of all the tires. If you checked the pressure and they are all fine, you should take the vehicle to the dealer for a diagnostic of the system. It is actually quite common for this indicator to malfunction, however it is not required for normal vehicle function. Good luck

Oct 16, 2009 | 2008 Dodge Avenger

Not finding what you are looking for?
2009 GMC Yukon Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...