Question about Cars & Trucks
By the blower motor,there's a resister,could be bad,usually 2 screws hold it on,can't tell by looking at if bad.Have to replace to see if that was the problem,but Autozone will take part back if it doesn't solve problem,need your year to look up location and repair guide.
Posted on Jan 05, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your blower motor resistor has gone bad, it should be located next to your blower motor in the car, held in place with a couple of screws, remove it and replace it. The resistor is responsible for making the blower motor run at slower speeds than high or (4). Let me know if this helps.
Posted on Jun 16, 2009
This can be caused by a few things. First, the fan motor may be burned out or the temperature switch may be malfunctioning so the fan doesn't engage. The thermostat may also have gone out which prohibits the coolant to circulate through the engine and radiator thus cooling your engine.
Posted on Jul 16, 2009
check the wiring to the reostat (the resistor that controls the fan speed) also check the reostat has not burnt out. (the reostat should be near the heater motor housing)
please let me know if this helps
big mike :)
Posted on Jan 04, 2010
Tips for a great answer:
Feb 27, 2016 | Cars & Trucks
Jan 22, 2016 | 2012 Ford Focus
Feb 14, 2011 | 2005 Ford Focus
Dec 21, 2010 | 2000 Ford Focus
Apr 29, 2010 | 2001 Ford Focus
Dec 18, 2009 | 2000 Ford Focus
Nov 23, 2009 | 2001 Ford Focus
Jun 16, 2009 | 2000 Ford Focus
Sep 25, 2017 | AC Cars & Trucks
64 people viewed this question
Usually answered in minutes!