Question about Saab 900

Open Question

WHAT IS P1115 FAULT CODE FOR SAAB 900 S? - 900 Saab Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 50 Answers

SOURCE: where do you find the radio code 1994 saab 900

Upon disconnecting the battery the radio will flash code until you enter the code. If you enter the code incorrectly you must either hold the band button down until the word code reappears or leave the key on for one hour until the word code reappears. This procedure depends on the year of the car. If you do not have the radio code and would like to get it you must call your local Saab dealer with the serial number off the top of the radio. Many times radio owners will write the radio code on top of the radio once you have the correct code. Typically the radio code is in the owners pouch and is a small card with the numbers on it.

NOTE: If this helps you, please, please give me a good rating!!

Posted on Mar 16, 2009

  • 4793 Answers

SOURCE: need radio code for 1995 saab 900 se

sorry but there is nowhere/body to find out what the code is...the first owner could have written it in the service book but "is that too much to ask...."you will either have to replace radio or an i.c.e.dealer may bypass the code for you .

Posted on Mar 01, 2010

SOURCE: WHAT IS CODE P1115

ECT

Posted on Jul 17, 2012

  • 536 Answers

SOURCE: how to check engine fault codes for saab 93

Diagnose with a scan tool.

Posted on Nov 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Saab 900 SE Turbo I has a code that pops up p1611


Please read about the code at the Saab forum at the provided link.
http://www.saabcentral.com/forums/showthread.php?t=241616

Scroll down to about half way point for information on fault code

Jun 16, 2016 | Saab Cars & Trucks

1 Answer

96saab 900s check engine light on code p1115 replaced rear 02 sensor then replaced front o2 sensor check engine light came back on.


you will also need to check the wires coming off both o2 sensors and also sometimes the main CPU gets fried always sending those codes

Sep 24, 2014 | 1996 Saab 900

1 Answer

When I switch on the radio?cd player in my Saab 900 the screen says "Code 1". What do I do to fix this ?


could be the anti-theft device in the radio. it requires you to put the 4 digit code in to "unlock" the radio for use. This number should have been given to you by the seller -otherwise can be obtained by a previous SAAB dealer. This can happen when the battery is disconnected for a period of time

Feb 22, 2013 | 1996 Saab 900

1 Answer

I have a 1996 Saab 900 convertible. The check


Take the vehicle to one of the major Auto parts stores and ask then to connect their scanner to your vehicle and identify the fault code that is stored. That will tell you where to look and what has faulted. Once you get the code you can get the new part there at the store and a Haynes Repair manual on your vehicle to do the repair yourself.

Jul 20, 2010 | 2004 Saab 9-3

1 Answer

Need radio code for a 1998 saab 900


The codes are not for the Saab but for the radio.
You need to take the radio to a dealer of that brand of radio. There is not just one brand that can be installed by Saab. a Saab dealer can help, but none of us can, because each radio has its own code. But a dealer has the tools to reset it.

Apr 11, 2010 | 1998 Saab 900

2 Answers

Need radio code for 1995 saab 900 se


sorry but there is nowhere/body to find out what the code is...the first owner could have written it in the service book but "is that too much to ask...."you will either have to replace radio or an i.c.e.dealer may bypass the code for you .

Mar 01, 2010 | 1995 Saab 900

4 Answers

What oil should I use in my Saab 96 900?


factory recommends you use 10w-30 motor oil ,hope this is helpful.

Nov 27, 2009 | 1996 Saab 900

1 Answer

Engine dies when anti lock light comes on


The ABS light should only come on when there is a problem in the ABS system: a wheel sensor or hydraulic unit problem.

The ABS system shouldn't be interconnected to the engine system so that an ABS fault shuts down the engine. Are you sure as to cause and effect? Could a shorting out of the ignition switch (thereby switching off the engine) be lighting the ABS lamp?

Get a wiring diagram and check for good grounds at the appropriate locations for a 1990 SAAB; also check for possible shorting out of the ignition switch under fault conditions.

The best source of info on this car is the "Bentley Bible" aka the Saab 900 Official Service Manual, costs about $40 from Amazon!

16 valve manual: http://www.amazon.com/Saab-900-Valve-Service-Manual/dp/0837603137

8 valve manual :http://www.amazon.com/Eight-Official-Service-Manual-1981-1988/dp/0837603102

The ABS system is complex, and best worked on by a trained and trusted professional.

Hope this points you in the right direction!

Saabreur

Jun 24, 2009 | 1990 Saab 900 Hatchback

1 Answer

SAAB 900 1988


Your problem with the APC system. Any perceived fault and you only get base boost. The most likely fault is the boost pressure sensor located under the dash on the left-hand side. when it is bad you often hear the APC solenoid valve clicking at idle.

Mar 10, 2009 | 1990 Saab 900 Hatchback

1 Answer

Retrieve fault codes 92 900


Fault codes come from the fuel injection system diagnostic circuitry, which can store up to three faults. They can be read through the check engine light in the dash. You'll need to make a switched test lead with a spade connector on one end for connecting to the test connector. The other end is connected to ground. In 1992 the test connector is located beneath rear seat in sedan, or under the bellows ahead of shifter in convertible. With ignition off and test lead off, connect test lead to ground and test connector pin 2. turn ignition key to ON When Check Engine light comes on, turn test lead switch ON; Check Engine light should immediately go out When Check Engine light flashes ONCE, IMMEDIATELY turn test lead switch OFF Any fault codes will flash through the Check Engine light, with a long flash at beginning and end of each code; code flashes are short flashes, each block of flashes is separated by a longer space. With the engne OFF, the first fault code is that for "No RPM" 1 2 2 3 1, it will look like oooo x xx xx xxx x oooo where o = steady on, x = single flash There are over 20 fault codes, so get yourself a copy of the best source of info on this car: the "Bentley Bible" aka the Saab 900 Official Service Manual, costs about $40 from Amazon 16 valve manual: http://www.amazon.com/Saab-900-Valve-Service-Manual/dp/0837603137 8 valve manual :http://www.amazon.com/Eight-Official-Service-Manual-1981-1988/dp/0837603102 Hope this helps, if it does please give a "thumbs up", thanks Saabreur

Jul 29, 2008 | 1992 Saab 900

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...