Question about 2003 Toyota Land Cruiser

1 Answer

Speedo and reverse lights not working - 2003 Toyota Land Cruiser

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

Posted on Aug 02, 2013

  • 6 more comments 
  • Anthony Repacholi
    Anthony Repacholi Aug 02, 2013

    Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

  • Anthony Repacholi
    Anthony Repacholi Aug 02, 2013

    Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

  • Anthony Repacholi
    Anthony Repacholi Aug 02, 2013

    Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

  • Anthony Repacholi
    Anthony Repacholi Aug 02, 2013

    Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

  • Anthony Repacholi
    Anthony Repacholi Aug 02, 2013

    Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

  • Anthony Repacholi
    Anthony Repacholi Aug 02, 2013

    Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

  • Anthony Repacholi
    Anthony Repacholi Aug 02, 2013

    Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

  • Anthony Repacholi
    Anthony Repacholi Aug 02, 2013

    Reverse switch is faulty, this will blow fuse. Replace switch problem solved :-)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY 2006 MITSUBISHI GALANT SPEEDOMETER ISNT WORKING I HAVE NO REVERSE LIGHTS


check your fuses for the lights the speedo is on seperate circuit check all fuses it may be in the cluster

Aug 27, 2012 | Cars & Trucks

1 Answer

Engine light still stays on


The check engine light comes only when the computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free. Until the fault that turned the light on is correctred the klight will remain on, u can disconnect the battery for 5 minutes to clear the light or ask the parts store to clear it for you, as far as the reverse light problem goes u most likely have a defective reverse light switch, replace it.

May 22, 2010 | 2003 Chevrolet Aveo

1 Answer

Half the light is out on the information console in my 2006 Toyota 4runner. Can I fix that?


Blown bulbs , easy!.
Remove the shroud under the steering column , ( the one where the fuse box and bonnet release is situated)
This will give you access to the bottom screws of the binacle around the speedo ( other screws up from underneath above the speedo)
Once binacle removed you will see the screws holding the speedo in, remove them and ( with the steering tilted fully down) remove the speedo head, there should be 3 or 4 electrical plugs in the back of the speedo ( don't worry they only fit one way and can't be muddled up )
In the back of the speedo are twist clips retaining the bulbs, remove and replace blown bulbs.
Reverse procedure to reinstall speedo.
A magnetic phillips head screwdriver is handy to get the screws back in without loosing them into the back of the dashboard.

Mar 31, 2010 | 2006 Toyota 4Runner

1 Answer

2003 Dodge Dakota lost speedo, reverse lights and ...


It's the speed sensor and it is located on the rear axle.

May 14, 2009 | 2003 Dodge Dakota Club Cab

1 Answer

I have a 1991 EB falcon iv done a auto to manual conversion and now it wont start help please!!!!


there are 2 things. if the starter doesnot work you you have to bridge the wires that go to the start isolation switch this is in the loome that hold the reversing lights, starter isolator and speedo, it is very important to have the speedo connected or the computer thinks you are dead reving and leans you fuel mixtures, the best way is to get the corect harnass, have fun

Mar 21, 2009 | 2005 Ford Futura

1 Answer

Speedometer no longer works


hi did the dealer pull this diagnosis out of hat ? or did you observe him carry out a series of diagnostic checks? i would first check the speed sensor electronis on g/box disconnect and clean/check for corrosion etc ? wd40 spray and dry plug you can test with voltmeter if circuit is ok then re plug and try again? other possibility could be actual sensor fault which you can change diy with a doner sensor which will then eliminate sensor fault? worth checking out before parting with $784+ ? make a thorough check of wires to sensor for any decay etc best of luck from uk ps make sure you pick speedo sensor not reverse light sender to verify put in reverse so light is on then disconnect if still on you have speed sensor?

Oct 31, 2008 | 2007 Hyundai Santa Fe Limited

Not finding what you are looking for?
2003 Toyota Land Cruiser Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...