Question about Seat Alhambra

Open Question

How do i remove the rear bumper on a seat alhambra

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
eitan
  • 291 Answers

SOURCE: remove the rear bumper

Removing Prowler Rear Bumpers First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps.

Posted on May 15, 2008

Ad
  • 99 Answers

SOURCE: Remove rear plastic bumper cover

please email me at meanness628@aim.com with any other info or questions if you have already gone to a body shop

Posted on Sep 29, 2008

alicantecoli
  • 22219 Answers

SOURCE: seat alhambra loss of power from third gear

could be turbo ,but the problem is its a common rail fuel injection system and this throws up another problem and that is its VW which from 2005 uses encrypted software so it is difficult to find the fault .change the fuel filter and see what happens if problem persists then its either a bosch diesel specialist or the dealer .sorry for no qiuck fix

Posted on Mar 28, 2010

  • 4793 Answers

SOURCE: Volkswagen Passat rear bumper removal

all the screws/bolts are underneath the plastic cover.hex head.(allen key)

Posted on Jul 12, 2010

  • 136 Answers

SOURCE: how to remove 2008 toyota yaris rear bumper

Go to this site. http://www.yarisworld.com/forums/showthread.php?t=33767

Further down you will see a diagram of the bumper removal.

remove the two bolts under the hatch, the four plugs along the bottom edge, and the plate light. Don't forget the red circle clip or bolt on the diagram. Then you just pull it off.

Posted on Dec 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace lighter seat alhambra 2002


cigarette lights are held in by the outside case being screwed up from the back. pull the earth wire of the case and undo it

Jul 21, 2014 | 2005 Seat Alhambra 1.9

1 Answer

Timing belt marks for w reg seat alhambra diesel turbo:-)


Camshaft setting tool put in position(rocker cover off) pump locking tool inserted, top dead center mark on flywheel in correct position.if not correct something won't line up

Jul 06, 2014 | 2005 Seat Alhambra 1.8

1 Answer

Fix button two on radio of seat alhambra


either a new radio or try to pull it out and free it up with a thin screwdriver ? who knows as it could be damaged completely behind the facia

Jan 19, 2013 | 2008 Seat Alhambra 1.9

1 Answer

Seat alhambra leaking oil from exhaust and smoking


The most likely cause is a worn bore and the oil is leaking past the rings. It is possible that the oil is entering the combustion chamber through a breather.

Jan 19, 2013 | Cars & Trucks

1 Answer

Alhambra 1.9 tdi suddenly started blowing smoke and seems to be running on three cylinders


dear . you should check turbo charger . make sure the engine oil is on level .

Sep 19, 2012 | 2005 Seat Alhambra 1.9

1 Answer

No acceleration in seat alhambra


cable on accelerator is lose or not connected

Aug 05, 2012 | 2005 Seat Alhambra 1.9

1 Answer

My seat alhambra clutch pedel goes down i have changed the master cylinder and ive bled the oil but the problem remains please help


You do not have the air bled out or the slave is also defective, suggest you replace the slave then try again using a vacuum clutch bleeding tool like the one make by a company called MITYVAC

Jun 17, 2012 | 2005 Seat Alhambra 1.9

1 Answer

My seat alhambra is letting water in but cant find the leak


if it is on the passenger side, and is not the rear w/s wiper washer pipe pushed apart (you will know if the rear washer is not working) then it MAY be the condensate drain, leaking into the car under the carpet.

Jan 28, 2010 | 2004 Volkswagen Touareg

2 Answers

On a 1989 nissan maxima with sonar suspension II how do you disassemble the strut assembly? the mounting bracket for sonar adapters is in the way of the strut center bolt.


First you must remove the rear seat to gain access to the top strut mounts. The bottom of the rear seat comes out first. On the 91 model there are two tabs at the base of the seat bottm that you pull forward to release the seat bottom. I'm not sure if the 89 is the same. After removal of the rear seat bottom, you will see a bolt at the bottom of each side of the rear seat back that need to be removed. Fold down the arm rest and disconnect the vinyl cover at the base of the armrest to expose and remove two screws. Push up on the rear seat back to unhook three plastic hooks (center and one at each end) at the top of the rear seat back. Remove the seat back. Remove the large metal support panel that is behind the seat back. Safely jack up the rear of the car and support on jack stands so the rear wheels hang free. Doing one strut at a time, remove the two top strut mount bolts leaving the center strut stud nut in place. The strut and mount will lower out of the unibody. Disconnect the bottom strut mount. Remove the strut/coil spring assembly. Using a strut/spring compressor (some auto parts stores rent these) compress the spring. Carefully remove the top strut stud retaining nut, top strut mount, bumpers and strut boot. Carefully install compressed spring, strut boot, bumpers and top strut mount on new strut and install washer and retaining nut. Reinstall strut and etc. in reverse order.

Sep 15, 2009 | 1989 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Seat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Adam Truesdale

Level 2 Expert

284 Answers

Are you a Seat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...