Question about 2012 Honda Civic Si Coupe 2.4L 4-cyl. 6-speed Manual

Open Question

Reset 2012 Honda Civic Si maintenance codes

Reset B1 Maintenance Code

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 58 Answers

SOURCE: what does the b14 maintenance

Maintenance Codes:

A - Replace just engine oil
B - Replace engine oil & filter

1. Rotate tires & check air pressure
2. Replace air cleaner element, check drive belt and replace dust & pollen filter
3. Replace Transmission fluid & transfer fluid (if equipped)
4. Replace spark plugs, timing belt, inspect water pump, valve adjustment
5. Replace engine coolant
6. Replace rear differential fluid

If you have a B14, it's B, 1, 4 as in the list

Posted on Oct 07, 2010

Ad
  • 9 Answers

SOURCE: cannot reset maintenance light on 2003 Honda Element

The dealer has issued a technical service bulletin regarding the maintinace required lamp I belive it states all lights headlamps tail and side markers have to be off and the door must be closed in order for the reset to work. How to Reset
Press and hold the trip/reset button, turn the ignition switch ON , and continue to hold the button for more than 10 seconds. this should fix the problem if not the the daytime running lights will have to be disabled before it will reset.

Posted on Sep 16, 2008

  • 31 Answers

SOURCE: how do i reset the maintenance required light?

Turn ignition off / hold down the trip reset button / while holding down trip reset turn key to the on position and wait about ten seconds or the light goes out. You also can look at a online owners manual at www.ServiceExpress.Honda.com

Posted on Dec 18, 2008

  • 54 Answers

SOURCE: reset maintenance light

If I remember correctly, on the dash you have a select button. Hold the button down then turn the key on, until the maintenance light blinks and goes out. Turn the key off then back on and your light should be out.

Posted on May 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2012 Honda Civic 2DR SI: What does the B12 maintenance Code mean?


"B" in the maintenance area means a brake service needs to be done.
"1" is a tire rotation.
"2" is cabin air filters needs replaced.

Jan 31, 2018 | Honda Cars & Trucks

Tip

Civic, Prelude, and Acura (Honda) Integra maintenance light reset.


On the typical Honda gauge layout, there is a small, rectangular, recessed button directly to the left of the "Maintenance Required" light. Using a key, you can press this button in, With the key off, hold down the trip meter reset button. turn the key on and continue holding the reset button in until the maintenance light goes off, about 10 seconds. which will cause the light to turn green. The maintenance light (at least on Civic) will come on about every 4000 miles if not reset (for oil changes), and also periodically for other scheduled maintenance.

on Dec 07, 2009 | Honda Civic Cars & Trucks

1 Answer

What is maintenance code b1?


Im assuming this is a Honda Civic error? If so try this link.

http://techinfo.honda.com/rjanisis/pubs/OM/NV0707/NV0707G00016A.pdf

Apr 02, 2016 | Cars & Trucks

1 Answer

I have 2007 honda civic and need to reset the service light?


  1. Edit Step 15 ΒΆ When it's time to change the oilin your Civic, the maintenance light (orange wrench) will appear on your dash, as well as a B1 message, showing an oil life of 15% or less. To reset the Oil Life % gauge, press and hold the SEL/RESET button for about 10 seconds until the Oil Life message begins to flash.
  2. 2006-2011 Honda Civic Oil Change (1.8L) - iFixit

    https://www.ifixit.com/Guide/2006-2011+Honda+Civic+Oil.../6446 iFixit

Sep 12, 2015 | Honda Cars & Trucks

2 Answers

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

Reset maintenance light


There are 2 way to reset the maintenance light on Civic.
1. Manually reset
To reset this maintenance light, you will put the key in the ignition. Next you will press and hold the odometer reset knob, which can be found on the dash where the car's current mileage is located. While you continue holding that know, you will turn the key to the first position but do not start the engine. After about 10 seconds, the maintenance light should disappear. If the light is still on, you can turn off the vehicle and then try the process again. Once the light is off, you are all set until your next schedule maintenance.

2. Hook up a HDS (Honda Diagnostic System) software on a laptop, the light will go off within minutes.

http://www.obd365.com/wholesale/honda-hds-him-diagnostic-tool-with-double-board.html

Apr 17, 2014 | 2003 Honda Civic

2 Answers

My maintenance required light came on and stays on. since maintenance required is such a broad subject, i was wondering how i can determine what may be causing this problem is it possible that it's the...


normally if its going to be an O2 sensor,, the check engine light would come on, not the maintenance light, I don't know if your car has 2 different ones, My 2000 civic does though,, normally a maint light comes on if its time for an oil change , etc... rest the light,, heres how you do that you use the button that resets your trip odometer to reset the maintenance light.

with the key in the ignition but not turned on, hold the trip reset button in with one hand. then, while holding the button in, turn the ignition key to the ON position so that the lights on the dash come on.

continue to hold the reset button in and watch the maintenance light. it will take about 15 seconds for the light to go out

when the light goes out, turn the ignition key OFF and then release the trip reset button.

your light will be reset and come on in about another 5000 miles to remind you of the next service

Sep 08, 2011 | 2004 Honda Civic

2 Answers

Maintenance light blinking


First to check with OBD codes reader, this is one advise to fault; when you have this number (code) the clues for solve the problem are more.

Try it, comment and rated this.

Apr 10, 2010 | 2002 Honda Civic

1 Answer

It'll be appreaciated if anybody knows how to reset maintenance minder for 09' Honda Civic.


It may not be the same for a Civic, but for a 09 Accord:
1. Turn ignition to ON (II) position
2. Press select/reset (odometer) knob until engine oil life indicator displayed
3. Press knob about 10 sec, until oil life & maint code items blink
4. Press knob another 5 secs, until code disappears & engine oil life resets to 100%

If this isn't right for you, the procedure should be indicated in your manual.

Hope this helps.

Oct 11, 2009 | 2009 Honda Civic

4 Answers

Reset maintenance light


If I remember correctly, on the dash you have a select button. Hold the button down then turn the key on, until the maintenance light blinks and goes out. Turn the key off then back on and your light should be out.

May 28, 2009 | 2005 Honda Civic

Not finding what you are looking for?
2012 Honda Civic Si Coupe 2.4L 4-cyl. 6-speed Manual Logo

Related Topics:

1,299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...