Question about 2005 Chevrolet Uplander

Open Question

How to replace 2005 chevy uplander abs wire harness

Passenger side abs wire harness contection is broke causing my ABS light on dash to be on continuously as well as ABS breaks do not engage - how do I replace the harness?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
autodr
  • 260 Answers

SOURCE: 2000 Blazer ABS engaging

what about the drivers side? and does it have a removeable wheel speed sensor from the wheel hub? if so, maybe broken exciter ring on axle shaft on one of the front axles

Posted on Dec 09, 2008

Ad
MrScary66613
  • 1990 Answers

SOURCE: Abs

This is Simply the Computer System Letting you know that there has been an Unusual Action. If it was a Mechanical Problem it would stay on Constant and Flash Periodically.

Posted on Jan 02, 2009

ewashmidas
  • 362 Answers

SOURCE: 2005 CHEVY +TRAIL BLAZER ABS AND BRAKE LIGHTS ON

When the ABS light is on when driving there is a problem in the anti lock brake system and you will need to have it tested to find out what the problem is. As long as the light is on the ABS has been shut off by the computer until it is repaired. There could be problems with one of the wheel speed sensors, wiring or the ABS pump. On some vehicles the red brake light will come on too.

Posted on Jan 28, 2009

polarcycle
  • 1392 Answers

SOURCE: 2005 chevy colorado abs fault

Sounds like water getting in one of the connectors. You will need to see what fault code is in there when the light comes on, then look at that sensor.

Posted on Jun 05, 2009

  • 454 Answers

SOURCE: abs system light is on service abs system light is

Have brakes checked out ASAP, you should still be under warranty.

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset ABS light on 2005 chevy uplander


you cannot its that simple the ABs computer is the only one that resets itself so if light on then you have a fault with a sensor on a wheel of the magnetic disk on the back of a bearing or on older the cars the toothed ring is loose .

Nov 10, 2016 | 2005 Chevrolet Uplander

2 Answers

2002 Tahoe abs relay location


images for 2002 Tahoe abs relay location

Chevy ABS and Brake Dash Light fix - YouTube

? 24:15
https://www.youtube.com/watch?v=Jo76ylqgUR8
Dec 22, 2012 - Uploaded by Skizzot7
This is how to fix intermittent ABS and Brake dash lights on all Chevrolet ... That board is rather robust and is installed external to the vehicle in a location that sits .... I took the module out of a2002 Sierra and it is engineered with no T10 .... ABS Sensor and Harness 2000-06 Chevy Suburban Tahoe GMC ...

How I fixed a Chevy with an Abs and Brake light on - YouTube

images for 2002 tahoe wiring



Dec 09, 2015 | Cars & Trucks

1 Answer

2005 chevy uplander


there is no c0400 there is a c0040 left front wheel speed check the wiring at the speed sensor about 3 to 6 inches from the conector on the body harness for a brake in the wirring

Apr 01, 2014 | Chevrolet Uplander Cars & Trucks

1 Answer

Abs codes c0040 and c0041 front wheel speed control sensor and circuit


Will be located near the wheel hub. As long as there is no physical damage I would guess you will be replacing the sensor

May 19, 2013 | 2005 Chevrolet Uplander

1 Answer

Service abs system light comes on all the time. both front wheel bearings have been replaced, abs light stays on.


i had the same problem with my 2005 chevy uplander. the ABS lights kept coming on. The fix for me was... I had a damaged and old battery(the original battery). If your still under warranty or not I would suggest you check this out by using a new battery to see if this is your solution.

Dec 16, 2011 | 2006 Chevrolet Uplander

2 Answers

Have a 2006 chevy Uplander and check engine light comes on and off, also the ABS light comes on and off. hade both systems checked and everything checked out fine. also the auto start works sometimes and...


I have a 2006 chevy uplander that had an abs light coming on so i took it to my local GM dealer to have it diagnosed and they had told me that the hub and bearing assembly needed to be changed, so i changed it and the light still came on. Upon further investigation i came to discover that the abs wires were frayed in two locations and that the connecters were loose i tightened the connecters and replaced the wires and now my abs light does not come on. I also discovered that i did not need a new hub and bearing assembly after all.

Aug 14, 2011 | 2007 Chevrolet Uplander LS Minivan

1 Answer

How do i turn off the abs light on a 2005 chevy uplander? replaced front pads and checked wires and connections. is there a way to see if the anti-locks are working?


Hello Abintz.
When your ABS light is on you have a problem in the system.
As long as the light is on your ABS system does not function at all.
If you have already checked the harness and connections the next thingt you can check yourself is resistance values at the wheel speed sensors.
One at each front wheel and one in the output shaft housing to the rear drive shaft.
They should read very close to 1000 ohms.
The front sensors are usually the area of most problems I see. They are replaceable.
Other than that you really would be hard pressed to find any other issues without getting it scanned by a repair shop.
If you have further questions please put them in "add comments and I will return to answer.
Best of the season to you.

KL

Dec 20, 2009 | 2005 Chevrolet Uplander

1 Answer

Abs traction control light on


get them to scan the wheel hub sensors these wires come from the hubs and replacing the wiring harness does not include the hub

Aug 31, 2009 | 2005 Chevrolet Uplander

1 Answer

Abs light on 2005 chev uplander...


You will have to check ABS codes to determine what the problem is.

May 02, 2009 | 2005 Chevrolet Uplander

1 Answer

2005 impala


All the hubs on the car have the abs sensor built into the hub. The abs system has to be re set to read the sensor . The rear hub bearing if noisy should be replaced. There are wiring harnesses that connect to the abs sensor. The harnesses to each of the abs sensor should be replaced.

Mar 18, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
2005 Chevrolet Uplander Logo

Related Topics:

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...