Question about 1998 Ford Contour

2 Answers

Need a diagram for serpentine belt 1998 Ford Contour 4cyl 2.0l.

I have a 1998 Ford contour and can't seem to find a diagram for the serpentine belt. It has a 4 cylinder, 2.0 liter made in June 1998.

Posted by on

  • 1 more comment 
  • Anonymous Mar 14, 2014

    plug wiring diagram 1998 ford 4.6 engine

  • Anonymous Mar 16, 2014

    A diagram that shows me wer n how to change cam sensor on 96 ford contour

  • Anonymous Mar 18, 2014

    cxl 3.8 liters

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 379 Answers

98 ford contour 2.0 belt routing

here is a picture of routing and how to do it , etc. , good resource ..

J5

Posted on Jan 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need diagram of spark plug leads and they order they should be in

Posted on Feb 23, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace drive belt


Are you talking about the cam drive belt or the accessory drive serpentine belt? What engine, the 2.0 liter 4-cylinder, or the 2.5 liter V6? If it's the serpentine belt, does it have air conditioning?

Feb 23, 2013 | 1997 Ford Contour

1 Answer

My 1998 Ford Contour serpentine belt is pretty torn up. How much is a new one and how hard is it to replace?


The replacement belt is usually less than $30 dollars. It is in a pretty narrow spot, but can be changed with basic tools. Look for the tensioner that moves back and forth. You can usually pull up on the belt with your hands and look for the part that moves.. This is the tensioner... When you are replacing the belt.. a wrench will be needed to move the tensioner and allow you to put the belt on... Hope this helps.

Aug 18, 2011 | 1998 Ford Contour

1 Answer

I have a 98 Ford Contour SE the automatic belt tensioner for the serpentine belt went out I bought the part and a new belt. How do I replace the part and belt?"


You need to 'unload' the pressure on he old tensioner by rotating it away from the center of the engine to releve the tension on the old belt-once you remove the old belt, the tensioner is bolted to the front of the engine, you remove the tensioner and bolt up the new one-then, thread the new belt (diagram is under the hood on a sticker) to all pulleys excert the very top one, and use a 1/2 drive rachett on the 1/2 inch square on the tensioner arm to move the tenisoner torward the center of the engine-this will give you enough slack to install the belt on the last remaining pulley.

Jun 22, 2011 | 1998 Ford Contour

1 Answer

I need to know the engine size of my ford contour 1998. It has 4 doors and 4 cylinders


the 1998 ford contour came with two engines the 2.0 engine which is a four cylinder or the 2.5 engine which is a v6 engine, if your not sure how to tell the diffrence then this will help you, take your insurance card for the car and look at the id or vin # some call it the id # and some the vin # look at the number and there are letters also in the id #, start at the left of the id# and count to the 8th digit and if its a G or an L then you have a v-6 engine which is a 2.5 liter, if the 8th digit is a 3 then you have a 4 cylinder engine which is a 2.0 liter, hope this is helpful, good luck.

Nov 05, 2010 | 1998 Ford Contour

1 Answer

How do you replace the serpintine belt on a 1998 contour?


Open the hood and locate the belt tensioner. The serpentine belt drive is located on the front of the engine on the passenger side of the engine compartment. The spring-loaded belt tensioner on the 1998 Contour is located slightly to the left of and below the water pump pulley
Release the tension on the belt using the serpentine belt removal tool. On vehicles equipped with the 2.5 liter V-6 engine, snap the 3/8 inch-drive adapter onto the removal tool. Slip the tool into the square, 3/8-inch hole in the end of the tensioner arm. Rotate the tensioner clockwise to release the tension. While holding the tensioner back, remove the belt from one of the pulleys. Release the tensioner, remove the belt from the remaining pulleys and pull it out of the engine compartment
Snap a13 mm socket adapter into the belt removal tool for the 2.0 liter, four cylinder Contour. Place the tool onto the 13 mm bolt that holds the tensioner pulley to the tensioner arm and rotate the tensioner clockwise. While hold the tensioner back, slip the belt off one of the pulleys. Release the tensioner, slip the belt from the remaining pulleys then remove it from the engine compartment
Route the new belt around the pulleys, according to the belt routing guide. The belt routing guide on the 1998 Contour is located on a decal on the left (passenger side) strut tower. If this decal is missing, or unreadable, the belt routing guide can also be found in your service manual. Rotate the tensioner pulley one more turn to allow the new belt to slip under the tensioner pulley.
Check the belt for proper alignment on the pulleys. It should lay flat on the pulley and not overhang the edges. If the belt must be repositioned, release the tensioner and reposition as needed.

Sep 18, 2010 | 1998 Ford Contour

1 Answer

I need a diagram for a 4 cylinder 1998 ford contour


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

For the 2.0L
Firing Order:
1-2-3-4
Cylinders:
(back of engine)
1-----2------3------4
(front of engine)
Ignition Connections:
(back)
3o....o2
4o....o1
(front)

Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Feb 09, 2010 | 1998 Ford Contour

1 Answer

Need diagram for 1998 Ford Contour serpentine belt.


1998 FORD CONTOUR - L4 2.0L 1989cc 121ci BI-FUEL FI N Z

Multiple Accessory, w/o A.C.
76f0cdb.jpg


Multiple Accessory, w/A.C. (Mfg. After 2/98)
0e0818e.jpg

Multiple Accessory, w/A.C. (Mfg. Before 2/98)
d6d97b4.jpg

More details, can find in DAYCO Catalogue

I hope helped with this. Good luck (remember rated thie help).

Dec 04, 2009 | 1998 Ford Contour

Not finding what you are looking for?
1998 Ford Contour Logo

1,921 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...