Question about 1997 Chevrolet Blazer

Open Question

1997 blazer low beams work high beams dont - 1997 Chevrolet Blazer

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: headlights wont work

Well...lets start with the obvious. Check fuses and NEVER piggyback any stereo or security stuff into their fuses...you dont want the lights to shut down during a night drive!!
Check under the hood for a relay center...also has some fuses there as well.

The Daytime Running Lamps are a "straight through wiring configuration". Doubt it even goes through a headlight switch at all.
But the regular lights do.
Unless you've worked on the front of the car and forgot to plug the headlights back in, do this...
Turn the light switch on...looking at the instrument cluster , can you make the high-beam-indicator light come on?
As you rotate the headlight switch knob...does the instrument panel lights brighten or dim? You probably have a faulty headlight switch...auto stores have them...they simply plug in.

Posted on Jan 04, 2009

Ad
  • 66 Answers

SOURCE: i have a 2001 chevrolet cavalier and the high beam

Sounds like its a problem with the light switch handle. Had it myself as well...
If you're savvy enough around car electronics take out the light switch handle, take it apart, find the problem and fix it. Inside the handle-switch you have several slide-switches and some double action slide switches.
Otherwise - get a different switch from a local junkyard or get a new one from your dealer.
Good luck.

Posted on Jul 11, 2009

  • 103 Answers

SOURCE: 2007 chevy trail blazer low beam lights wont work.

maybe a fuse the fuse box is under the drivers side passenger seat . sometimes ive seem them get something spilled on them and i had to wiggle the fuses to clear the corrosion

Posted on Mar 17, 2010

  • 3 Answers

SOURCE: High Beams, parking lights work. Have NO low beam

had same problem had to replce whole turn signal switch

Posted on Mar 18, 2010

  • 70 Answers

SOURCE: My 2000 Blazer low beam headlights won't come on

Try changing the headlights....some headlight high beams will work even when the low beams dont

Posted on Aug 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

One low beam wont turn on, but both high beams will


ok if you run a power wire to the positive on battery does it go?
if so its a plug or cable issue. if not make an earth wire for the earth side of light and try the power again. if it goes you have a bad earth.

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

High or low beams wont come on 1997 blazer


There is a module for this. Replace it or bypass it. I cold tell you how to do it, but I need diagrams for it. I can buy them online, but it is your truck. alldatadiy.com

Dec 20, 2013 | Jeep CJ7 Cars & Trucks

1 Answer

Low beams don't work on 1997 Honda Civic


If your high beams work and your low beams do not work... try changing the light bulbs first. The low beams can burn out and the high beams still work.

May 01, 2012 | 1997 Honda Civic

2 Answers

I replaced the low beam headlight on the passenger side of my 1997 Blazer, but it still won't work, the high beam works fine.


check for a bad ground or check plug and back track wires with test light till you get power and fix the wire. Make sure you check for a good ground first. If all fails then run a new wire from the other low beam light to the non working one.

Feb 03, 2011 | Chevrolet Blazer Cars & Trucks

1 Answer

My 2000 Blazer low beam headlights won't come on .High beams, fog,running, turn signals all work fine.


Try changing the headlights....some headlight high beams will work even when the low beams dont

Aug 17, 2010 | 1995 Chevrolet Blazer

1 Answer

I cant get my low beam on..my high beam stay on and when switch to low beam,it still high beam please help cause i work the graveyard shift and im sick of tire of getting pull over for something i cant...


Sounds like your switch on the column is broken. It happened to me before. I didn't feel like taking the whole steering column apart so I traced the wires from the headlights and hooked up one of those old floor mount clickers. They still sell new ones at the auto parts store and you can screw them to the floor where you want. You'll need a couple of those clamp on T wire connectors. The hardest part was tracing the wires. And as long as you don't cut the factory wires, your factory high beam indicator should still work.

Feb 22, 2010 | 1997 Chevrolet Blazer

2 Answers

How do you adjust the headlights on a 1997 chevy blazer (S-10) 4WD.


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Sep 29, 2009 | 1997 Chevrolet Blazer

1 Answer

Only one low beam light is working


change your light bulb, because the lower filament is already open or busted. ok

Sep 04, 2009 | 1997 BMW 318

1 Answer

05 Jeep Wrangler High Beams Work, Low Beams dont


There are no relays for the headlights. Your problem could be from the headlight switch. You would have to check and see if you have power coming out of the switch on the low beam side. Check with a test light.

Dec 15, 2008 | 1997 Jeep Wrangler

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...