Question about 2008 Dodge Nitro

Open Question

Replace fog lights on dodge nitro - 2008 Dodge Nitro

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 840 Answers

SOURCE: How to replace fog lights on 1998 Dodge Avenger ES

you need to take off the buttom shields and then you should be able to get to the fog lights

Posted on Jan 25, 2009

motor1258
  • 6674 Answers

SOURCE: 2007 replacement light bulbs

If none of local autoparts stock them, you'll have to go to dealer.

Posted on Mar 07, 2009

  • 3600 Answers

SOURCE: Have a 2008 nitro just purchased used without fog lights...

They want that much because they have to replace the valance and paint it, the one with fog lights has a special brackets for them, Check to see if there is a nut on the back side of the fog light if there is you can just remove it, the fog lamps cost $110.00 each so thats 220 dollars and they use a special light switch that costs $60.00 thats why it's so much, plus have to wire it in if the Dodge did not come with the lights it may not have the wires for the harness to run the lights. So you will have to run a new relay intothe relay box switch and wires and a fuse to do it, even if you buy the factory lights and add a switch and relay your talking about $300.00

Posted on Aug 28, 2009

  • 1 Answer

SOURCE: 2008 dodge nitro change oil light how to turn off ...

Directions are in the book, but you would put the key in and turn it all the way, just don't start engine. Pump gas pedal all the way to the floor 3 times slowly, but it has to be with 10 seconds. Turn key off and when you start again, oil changed chime and warning should not be on. If it is, try again.

Posted on Jul 25, 2010

  • 1 Answer

SOURCE: where is the fog lamp

you need to turn on your park lamps, then the same switch pulls out on the end turning the fog lamps on

Posted on Feb 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse in a 2007 Dodge Nitro that powers the fog lights?


Dodge does not use a fuse to control those lamps. Dodge uses a Totally Integrated Power Module or TIPM which controls the power to the lamps. This thing is located in the Engine Compartment in that big Fuse Box next to the engine. The unit is not a fuse but rather a self contained processor that regulates power to the Fog Lamps. This unit is replace as an assembly as it is not user serviceable. But before replacing it make sure the lamps actually work as simple as that is it is often overlooked. One more thing Dodge has employed the use of Circuit Breakers in the Wiring Harness so make sure they are working as well.

Feb 07, 2015 | 2007 Dodge Nitro SLT

1 Answer

What would cause the engine light to come on Dodge Nitro 2011?


What codes do you have?

Why would start installing parts,
until you diagnose the codes &
actually find a problem?

May 22, 2014 | 2011 Dodge Nitro Shock

1 Answer

Check engine light on 2011 dodge nitro


Hey guys I have a 2011 Dodge Nitro 3.7 and today my engine light came on and it was running like I was on rumble strips. I floored it and it sputtered and ran terrible then the light started flashing then I cut it off tried to reset still the light came on. I put the scanner on it and it turned out to be the coil plug on the #3 cylinder. COIL PLUG. Hope this helps out GOD BLESS!

Sep 04, 2013 | 2011 Dodge Nitro

1 Answer

Left and 3rd brake light is not working on 2007 Dodge Nitro.


it might be a resistor or just the bulbs or sockets bad.

Apr 13, 2012 | 2007 Dodge Nitro R/T

3 Answers

Where is the fog lamp switch on a 2008 dodge nitro? I have fog lamps but I can't seem to turn them on, am I missing something here?


you need to turn on your park lamps, then the same switch pulls out on the end turning the fog lamps on

Jan 23, 2011 | 2008 Dodge Nitro

2 Answers

Have a 2008 nitro just purchased used without fog lights but the fog grates are there on the bumper. Can hubby cut out the grates for the fogs and install them himself? Are there instructions somewhere on...


They want that much because they have to replace the valance and paint it, the one with fog lights has a special brackets for them, Check to see if there is a nut on the back side of the fog light if there is you can just remove it, the fog lamps cost $110.00 each so thats 220 dollars and they use a special light switch that costs $60.00 thats why it's so much, plus have to wire it in if the Dodge did not come with the lights it may not have the wires for the harness to run the lights. So you will have to run a new relay intothe relay box switch and wires and a fuse to do it, even if you buy the factory lights and add a switch and relay your talking about $300.00

Aug 28, 2009 | 2008 Dodge Nitro

2 Answers

2007 replacement light bulbs


If none of local autoparts stock them, you'll have to go to dealer.

Mar 07, 2009 | 2008 Dodge Nitro

1 Answer

How to replace fog lights on 1998 Dodge Avenger ES


you need to take off the buttom shields and then you should be able to get to the fog lights

Jan 25, 2009 | 1998 Dodge Avenger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...