Question about 2005 BMW 3 Series

Open Question

2005 BMW 325xi computer reset

What is the computer reset procedure?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 145 Answers

SOURCE: changing headlamps on 2003 bmw 325xi

I am assuming that you have a burned out head light bulb.
1) Open hood.
2) Working in back of headlight assembly, grasp rear of bulb socket (harness connector) and turn counterclockwise 90 degrees. Pull bulb out of headlight assembly.
3) Disconnect harness connector from bulb (gently pry, it's plastic)
4) Installation is reverse of removal. (Do not touch halogen bulb with bare skin-oils from hand will cause bulb to burn out.) Align tabs on bulb base to cutouts on rear of lens assembly. (Note bottom tab is wider than other two) Secure bulb by rotating clockwise 90 degrees.
Low beam bulb H9006
High beam bulb H9005

Posted on Jan 23, 2009

Ad
emissionwiz
  • 76630 Answers

SOURCE: BMW 2001 325xi Power Steering noise / vibration

no filter, sounds like the steering rack is worn out and need to be rebuilt.

Posted on Apr 22, 2009

  • 484 Answers

SOURCE: I replace brake lining on bmw 325xi 2006. How do I

Unfortunately, you have to have the service reset tool. Dealers and BMW mechanics have this tool, but i don't know whether they reset for free. i guess it depends on who you take it to.

Regards,
matt

Posted on Sep 15, 2009

ZJLimited
  • 17970 Answers

SOURCE: how to install hid on a bmw 325xi 2006

Review this tutorial: How to Install HID inside your BMW E36 – DIY

Also, can review this Car Replacement Light Bulb Size Guide – 2005 BMW 325i 325Xi with HID

I hope helped with this. Good luck (remember rated this).

Posted on Oct 15, 2009

  • 3 Answers

SOURCE: how to reset computer after oil change on 2006 bmw 325xi

Ignition key must be “off”
• Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
• Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “ OIL SERVICE, or “INSPECTION”, with “RESET”.
The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
• Press and hold the reset button again until the word “RESET” begins to flash.
• While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear:

Posted on Nov 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't rear door open?


How to Open Trunk with No Battery. - Bimmerpost

www.e90post.com/forums/showthread.php?t=690147
May 11, 2012 - 22 posts - ‎16 authors If you're reading this, you are probably stuck like I was stuck - hopefully .... I'm actually surprised BMW made this possible - seems like a real ... Does this also apply to the 3 series Wagon (E91 a.k.a Touring)? Mine is a 2005 and there is no key lock in thetailgate. ... Drives: 2006 E91 325xi 6 speed wagon. Trunk won't open???
21 posts
Jul 31, 2008
Trunk opening by itself - Page 2
22 posts
Dec 28, 2006
More results from www.e90post.com

Sep 30, 2015 | 2005 BMW 325xi Wagon

1 Answer

Rear hatch wont open no key hole no electric


and no dealers close by either I assume .

Sep 30, 2015 | 2005 BMW 325xi Wagon

1 Answer

The coolant light is on for 2005 bmw 325xi


Either your coolant is low or the coolant level sensor is bad. You should see the overflow resevroir next to the radiator under the hood. Open the cap when the engine is cool and fill with a 50/50 mix of antifreeze to the cold level. If you are already at the level, you will see a sensor mounted on the bottom of that tank. Can probably get it through autozone or definately through Pelican Parts. Easy change..

Mar 06, 2013 | 2003 BMW 325

1 Answer

Since i have changed the car battery, the brake lights don t turn off on the dashboard.... BMW 325XI 2002.... Should or is there a way to reset the lights in the dashboard? Or what can I do?


Your owners manual should explain the battery reset procedure

May have to go to a repair shop & look it up in their data base
& write it down

The Euro Cars require more nonsense like that than domestic
& asian ones, but they are all going that way

Won't be long before no one can use a vehicle,I give it less than 5 years

Feb 02, 2013 | Cars & Trucks

1 Answer

2005 BMW 325xi.....won't start


check the battery~~~ and starter, and ignition~
_____________
Ktag K-TAG

Oct 21, 2012 | BMW Cars & Trucks

1 Answer

My 2002 bmw 325xi fuel filter location?


It is on the drivers side on the chassis.

yes you can change it yourself. Make sure you de-pressurize the system before removing (undo the gas cap).

Also...order the filter from bavarian auto or one of the online stores. The one you need is with the pressure regulator.

If you go to autozone, etc. they will sell you the worng filter.

Oct 26, 2009 | 2001 BMW 325

1 Answer

How to reset computer after oil change on 2006 bmw 325xi


Ignition key must be “off”
• Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
• Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “ OIL SERVICE, or “INSPECTION”, with “RESET”.
The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
• Press and hold the reset button again until the word “RESET” begins to flash.
• While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear:

Oct 16, 2009 | BMW 325xi Cars & Trucks

2 Answers

How to install hid on a bmw 325xi 2006


INSTALLATION GUIDE:
BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
Parts Identification:
Projector Headlight
Halo & L.E.D.
Bottom of the Headlight:
Ballast Bracket, Halo Wires(red/black)
Turn Signal Adaptor
TOOLS REQUIRE
10mm - 8mm socket
Philip Screwdriver
Crimper/Pliers
For more information about how to install your vehicle, come visit our youtube page on
http://www.youtube.com/spyderauto
Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
STEP:
Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
Factory Xenon Headlight
Spyder Projector Headlight using Factory Xenon Lights
STEP:
pls vote an diam giving you link also for better help BMW e46 HID Headlight Replace
install-hid-bmw-325xi-2006-afy5cnsznmokzumyhdcbeseq-5-0.jpg

install-hid-bmw-325xi-2006-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Oct 15, 2009 | 2003 BMW 325

1 Answer

I replace brake lining on bmw 325xi 2006. How do I


Unfortunately, you have to have the service reset tool. Dealers and BMW mechanics have this tool, but i don't know whether they reset for free. i guess it depends on who you take it to.

Regards,
matt

Sep 15, 2009 | BMW 325 Cars & Trucks

1 Answer

BMW 2001 325xi Power Steering noise / vibration


no filter, sounds like the steering rack is worn out and need to be rebuilt.

Apr 22, 2009 | BMW 325 Cars & Trucks

Not finding what you are looking for?
2005 BMW 3 Series Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...