Question about Cars & Trucks
Don't need to remove the door panel. Just remove the small cover in the door handle that hides a little screw and use a flat head screw driver to pop off the handle.
Posted on Jan 05, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Do u mean the door latch, which u pull to open the door, or the plastic molded handle u grab to shut the door? If it's the latch, there are two small round plugs in the plastic area of the door lock and locking switch. Use a small flat end screwdriver to pry them out , exposing two philips head screws. If this isn't what u needed, let me know, I'll get more info for u. countrycurt0
Posted on Oct 04, 2008
there is a pin in the door handle might have broke off there are two 10 mm nuts that will release the handle but you have to take the door panels off and remove it any local junk yard should have it or can order it for you
Posted on Mar 18, 2009
To Remove Door Panel on 2001 Honda Accord:
A: To remove the plastic piece with the door lock button and door handle connected to it:
1- Remove the screw in the middle located behind a plastic cover button
2- Push (slide) the whole assembly Forward (toward front of car)
Besides the screw, it is held in place by 3 hooks on the backside that hook into holes in the metal door frame
3- Now unhook handle from small metal bar going through door by pushing (toward door) plastic clip (blue?) off of the bar, then the bar will come out of the clip hole, thus releasing the handle.
4- Depress little grey button /bar (purple painted on it)on elec. connector to seperate connector, thus releasing door lock switch
Now the whole assembly (metal handle, door lock switch, and plastic piece) will come off door panel
B: The door is held on by 2-screws, 7-plastic snaps/plugs, and 1-plastic plug.
The screws are located: bottom of hand hold and the other behind the handle, both covered by little covers that have to be pryed off to access the screws.(hint: the screw with the built in spacer goes behind the handle when you are trying to reinstall)
The 7-plastic snaps: 3 across bottom and 2 on each side. Not visible, they are mounted to the inside of the panel.
The 1-plastic plug is visible at the upper front of the panel and is the same color as the surrounding trim
C: Take off the big plastic triangle piece above the door panel and behind the mirror. Pull/pry off. It has 2 snaps holding it on. one near bottom and one near the front.
D: Light lens prys off from bottom. Unscrew (1/4 turn) the light assembly with bulb still intact from backside of panel
E: Remove the Hand-Hold/window switch assembly:
Posted on Apr 27, 2009
It's probably broken, or unhooked. Just take your inner door panel off, and you'll soon figure out what's happening. Sometimes the rods get bent, or they come off the clip, or just need adjusting. And sometimes the handle itself is broken, but you can do it!
Posted on May 22, 2009
Tips for a great answer:
Jul 27, 2014 | 2012 Honda Accord LX Sedan 2.4L 4-cyl....
Nov 25, 2013 | Honda Accord Cars & Trucks
Sep 10, 2013 | Honda Civic Cars & Trucks
Jun 30, 2013 | 2007 Honda Accord Sedan
May 23, 2012 | 1992 Honda Accord
Aug 21, 2010 | 2003 Honda Accord
Jan 22, 2010 | 2007 Honda Accord Sedan
Dec 14, 2009 | Honda Odyssey Cars & Trucks
Sep 17, 2009 | 1997 Honda Accord
May 22, 2009 | 1992 Honda Accord
22 people viewed this question
Usually answered in minutes!