Question about 2006 Chevrolet Impala

Open Question

Relearn Throttle Body On 2006 chevy Impala - 2006 Chevrolet Impala

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jsmes1027
  • 749 Answers

SOURCE: son cleaned throttle body on my 2001 chevy impala

Did he clean the throttle body while it was on the vehicle? It is probably flooded out now, Turn the key on like you are going to start it then hold the gas pedal to the floor. This process is the clear flood mode and disables the injectors from spraying any additional fuel.Give this a try and see if it will start for you. If not may need to remove the sparkplugs to dry them off.

Posted on Nov 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hhr 2006 i try to clean the throttle body but now the relenti is to high how i reprogram the throttle body


You need to use the Tech II scan tool from GM to perform this relearn process. You can try disconnecting the battery for 30 minutes, but you more than likely will need the relearn procedure done at your local dealer.

Oct 12, 2015 | 2006 Chevrolet HHR LT

2 Answers

How do I adjust the throttle body


The throttle bodies on most newer cars are not adjustable for its idle speed. If the Check Engine Light is on, go to the nearest auto parts store and get them to pull the error codes from your car's computer. Post the codes back here and we can give you a better answer to your question

Mar 22, 2015 | 2007 Toyota Corolla

1 Answer

2004 chevy colorado throttlle body relearn


I haven't done a throttle relearn. All I have done are plug and play. Ecm controls the throttle thru the pedal position sensor. I've done up to 2010 so far, on various makes and models.

Oct 11, 2014 | 2004 Chevrolet Colorado

1 Answer

Need throtalbody diagram


If you go to the internet & use photos or diagrams, type in 2006 chevy throttle body diagram.

Jan 27, 2014 | 2006 Chevrolet Chevrolet Impala SS

1 Answer

I have 2006 Impala. The idle speed became low and car dies when I slowdown and this problem started after replacing the car battery What could be the problem


If this vehicle is equipped with the cableless throttle, you need to try this first:
remove the air intake hose
clean the throttle door with an aerosol throttle cleaner
replace air intake hose
Upon starting, you may need to apply gas slightly while starting to clear the throttle cleaning chemicals from engine, continue to hold accelerator to 2000rpm for about 2-3 mins
release gas pedal slowly to allow ecm to relearn idle.
This procedure allows the ECM to relearn the vehicle true idle position.

Sep 06, 2011 | 2006 Chevrolet Impala

1 Answer

Chevy trailblazer 2007 P0506 & P1400 what are the solutions for these codes


Cleaning your throttle body should take care of both problems. Clean your throttle body with throttle body cleaner. First disconnect the battery, clean the TB with TB cleaner, must be nice and shiny. When finished, hook the battery back up and drive around for 20 minutes or so with all accessories off, so the computer will relearn a properly functioning throttle body.

Your computer learned some bad habits, so when you changed the battery, the computer thought the throttle body was clean and functioning properly. So when you changed it, this caused all your problems. Very common, keep your throttle body clean, should be done at least once a year. Total cost if you do it yourself is around $5, for the can of TB cleaner.

Apr 18, 2011 | 2006 Chevrolet Trailblazer

1 Answer

When replacing a throttle body do I need to relearn the computer to the new part


if you had the battery cable off you will most likely need to let the computer re-teach itself.. if not your good to go. hope this helps

Dec 14, 2010 | 2006 Chevrolet Impala

2 Answers

I got code p2176 I changed out the tps still got same problem did not have this problem with other engine just changed engine out now cant seem to get this code off causing the car to rough idle and low...


P2176=Throttle Actuator Control System - Idle Position Not Learned
Did you use all you old sensors,or is some of them from the new engine,I would swap out the IAC sensor or check for wires not hooked up.
If it can't relearn to idle the Idle air control might be different then your old one,but its not registering with the computer

Dec 17, 2009 | 2006 Chevrolet Impala

1 Answer

Program a keyless remote on a 2006 impala


push relearn again then press and lock and unlock for about ten seconds till u hear beep

Feb 19, 2009 | 2006 Chevrolet Impala

Not finding what you are looking for?
2006 Chevrolet Impala Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...